Search results

Has anyone had issues using these drivers where your connection says connected but there is no internet?

I have a MSI GL739SC-028 gaming laptop with 10.14.6 installed that I cannot get the HDMI out to work. The processor is Coffee Lake Refresh 9300H. The dGPU is disabled and I've confirmed the HDMI is routed to the UHD 630 in windows. I have the bios set to IGFX, DVMT set to 64MB. I've tried...

Adding the below to DeviceProperties also fixed this issue for me. <key>DeviceProperties</key> <dict> <key>Add</key> <dict> <key>PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)</key> <dict> <key>disable-gpu</key> <true/>

My sleep has been working thanks to @MrMinimizer thread and this post https://www.tonymacx86.com/threads/new-install-for-asus-tuf-gaming-z790-plus-wifi-d4-w-i7-13700k-cpu.322856/page-3#post-2349888

I figured it out. The Ethernet worked fine on my USB EFI but not on the SSD EFI so I changed the SSD to match the USB. This included removing the DMAR delete from @CaseySJ i225 post, adding 4 ACPI patches, updating the device properties with the name as a STRING, disabling AppleALC, enabling...

I figured it out. The ethernet worked fine on my USB efi but not on the SSD efi so I changed the SSD to match the USB. This included removing the DMAR delete from @CaseySJ i225 post, adding 4 ACPI patches, updating the device properties with the name as a STRING, disabling AppleALC, enabling...

This definitely affected my windows system but the newest drivers seemed to have eliminated this issue for me.

Update: It's still at half duplex but I have figured out that the OS is recognizing i226 correctly. The system report shows the Vendor as 0x8086 and the Device as 0x125c, which is accurate according to the Linus Kernel Driver Database.

Has anyone with this motherboard been able to get full duplex 1000baseTX Ethernet? My gigabit Ethernet is always set to 100.

Ventura 13.0.1

I upgraded my hack to a Asus ROG Strix z790-a gaming wifi d4, which uses the z790 chipset and Intel's i226-V ethernet controller. I used @CaseySJ AppleVTD settings below and it has connectivity, but it's only at half-duplex. If I take it off Auto, and set myself it doesn't connect. Enabling...

This is happening on z790? Are you using the IntelMausi kext?

Got it booted but the USB ports won't read my flash drive right now, but progress has been made.

I am doing the same on a ROG Strix z790-A Gaming Wifi D4, this is much harder than my z390 or my MSI laptop hacks. I'll update this thread with my positive results once I start to get some lol.

Welp, ignore everything I said then lol. Damn. I don't know. Have you tried the GPU in a different slot? Does your system have iGPU?

It's probably the dual CPU or that they are AMD. NI doesn't seem to be the most robust coders so if your rig is a little out of spec i.e. 2 GPU when official Macs use 1 or AMD CPU when official Macs use M1 or Intel, then it might crash.

Figured out the issue. Native Instruments programs don't like 2 GPUs. None of my NI plugins would work or validate even if I had the 3080 disabled via OC. I had to unplug the PSU cables from the 3080 and restart, that way it never appeared to the system. Once I did that, Native Access ran and...

I have the same issue with Native Access and my hack. I have 2 GPUs. 3080 for Windows, and a GT710 for MacOS. I have the same OS, 10.14.6 too.

add -igfxblr to your boot arguments. Worked for me. Whatevergreen was updated with new things and that is one.

Solved. The Killer 2400 chip on this laptop is not Qualcomm so it doesn't work with Atheros. I had to use this Realtek driver insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/?page=55&tab=comments#comment-2685136