Search results

Update went smoothly.

Hi, I use also the latest Mojave update, and now I have installed the latest Affinity Photo update, 1.7 because finaly it has Metal support. The performace is improved but if I do a radial blur on an 4000x3000px image the changes are not smooth. (On an iPad pro it is smooth with the same image)...

Yes, I have tried, makes no difference. No, it just a full HD, the cable and connection should be okay, because with my previous build with Gigabyte 1060 GPU was okay than I have changed the GPU to Vega 64 and did a clean install and now I have this problem. And also, as I mentioned, About This...

Hi, I have made my install based on this thread also did the configuration and almost everything is working perfectly except one thing, I am using two outputs of the Vega 64, my main monitor is connected over DisplayPort to the card, and one of the HDMI output is connected to my AV Receiver and...

Thanks your help! I have started to fix the audio, I have tried all suggestions and prepared a table what I have experienced, I hope it helps for somebody: So I have decided to use the ID 13, because it behaves like a laptop, means if you plug a headphone into the jack the main (internal)...

Thanks your fast reply. System information looks okay, the Hackintool shows also GPU is fully supported but what strange is there no GPU name, ID and VRAM size: There are two other things regarding GPU: - iStat (also HWmonitor) shows that GPU die temperature is 127C - And sometimes the GPU...

Hi, I am recently did a clean install of High Sierra and used your (pastrychef) EFI folder, than I have successfully updated to Mojave, also used your EFI. My build is a little bit different as yours, so far look okay, I would start testing right now, my question would you would recommend to...

Thanks your answer, unfortunately it was not possible because I have only one NVME driver installed, a Samung 970 EVO Plus 500Gb, because my idea was to divide this disk to 250-250Gb and use one part for Osx and the other for Win. In the last days I have deleted complatelly this drive (Win also)...

Hi guys, I have just a basic question, would be possible to install OSX if a Windows is already installed and functioning? Because I am not able to do it, let's explain what is happened, I have had High Sierra installed than I installed Windows everything worked correctly then I messed up...

Thank you so much your help, OFF topic, but unforunately my system is not able to boot anymore, because I have had updated to 10.13.6 and the USB 3.0 was gone, I applied the new patch which does not helped and than I tried to find out what is going on, most probably I messed up something and now...

I have used the Pacifist way and terminal to install kext. After that, the system hangs at "HID: Legacy Shim 2" during boot like before, then do restart automatically. I have found the reason for that, if I remove my phone from the USB port it boots normally. The back panel sound is okay, but...

I did not really understand the task, but I tell you what I did, I have renamed 1.: S/L/E/AppleHDA.kext/Contents/Resources/layout1.zml.zlib, layout2.zml.zlib, layout3.zml.zlib, Platforms.zml.zlib to _layout1.zml.zlib, _layout2.zml.zlib, _Platforms.zml.zlib to be able to restore them if something...

I have High Sierra installed. Version 10.13.6 (17G5019) What you mean is not correct? Only the AppleHDA.kext from S/L/E was not there, because I did not change it. But now I have included that file too.

Thanks toleda your quick reply, really appreciated! Sorry, yes, that was used for HDMI audio and for analog output I have used, this: https://www.tonymacx86.com/threads/applehda-realtek-audio-guide.234732/ Now understood what is what, thanks your clarification. Okay, now I see, I have...

Hi guys, I have read quite a lot regarding the audio setup for High Sierra, but unfortunately without any success. So my problem is in the Sound Preferences I have three "Line Out"-s if I plug my speaker input into the front connector of the back panel audio jack, the Sound Preferences outputs...

I have tried in terminal: bash <(curl -s https://raw.githubusercontent.com/Benjamin-Dobell/nvidia-update/master/nvidia-update.sh) 387.10.10.15.15.108 but it does not found that version.

Hey guys, did somebody installed the latest High Sierra update (17G5019) and using nvidia web driver? I did, but unfortunately there is no GPU support and the web driver found no update :( Is an old driver could help? I have the latest driver installed, 387.10.10.10.40.113.

Hi, I have just read on another forum how to solv this boot hang issue with HS - APFS - NVME, I tried it and it is working. 1. Take an SSD, format it to APFS. 2. Mount the EFI folders, and copy the original EFI folder content to the SSD EFI partition. 3. Use Carbon Copy Cloner to clone the NVME...

Hi, I can propose a solution, I have just read on another forum and tried it and it is working. 1. You should take an SSD, format it to APFS. 2. Mount the EFI folders, and copy the original EFI folder content to the SSD EFI partition. 3. Use Carbon Copy Cloner to clone the NVME OS partition to...

Hi, did you find any solution for this problem? Our system is quite similar that is why I did not tried the patch above. Do you have nvme drive?