Anyone lose USB functionality after updating to 10.14.6? I've tried several patches but none have worked. While the SSDT works, speeds are severely crippled.
Try this in Clover Configurator, courtesy of @CaseySJ:
SMBIOS: Use either iMac18,3 or iMacPro1,1.
Devices: IntelGFX = 0x0
Devices: Devices* = PciRoot(0x0)/Pci(0x2,0x0)
Properties:
Key = framebuffer-patch-enable | Value = 01000000 | Type = Data
Key = AAPL,ig-platform-id | Value = 0300923E | Type...
Do you have the iGPU enabled? If so, try disabling it in the BIOS and see if Final Cut doesn't crash. If it works, you just need to fix your implementation of the IGPU - either keep it disabled or (if you want QuickSync) enable it in headless mode.
There is definitely an improvement in the signal strength. This not only meant better range and speeds but also more networks detected in general (even ones outside my house). AC WiFi speeds in particular are also noticeably faster because of the improved reception. Do bear in mind that I use a...
I pulled the trigger and went with the BCM94360CS2 and no heatsink. So far, no issues. I have not installed any replacement heatsinks to date and have noticed no issues, which does support the theory that the heatsink is mostly for gaming aesthetics.
The BCM94360CS2 runs circles around the...
That was partly why I ended going with the Streacom - I love the looks and the potential for 280mm water cooling. I'll definitely be fiddling with the internals to achieve better temps. It's no wonder though that you get much better temps - that's an impressive array of fans. I've a 92mm rear...
Thanks a lot. This is really helpful.
I'm actually not having any issues at all, except for auto unlock with Apple Watch not working reliably (worked once so far). Other than that, AirDrop, Handoff, and Continuity are running great. I'm going to try making it work for now, but will definitely...
The short answer is yes. The RX 560, 570, 580 and the Vega 56 & 64 are pretty much plug and play. Avoid XFX cards and stick to those used in golden builds and successful guides. You will most likely need Whatevergreen.kext to address some minor inconvenience that vary from one card to another...
Anyone facing issues with auto unlock with Apple Watch using the DW1560? In my case, it's fully enabled and during wake it says "unlocking with Apple Watch," but it gets stuck there and reverts to password login eventually. I've tried rebooting the watch and iPhone, but that didn't help...
Thanks for a truly awesome guide. I just finalized a a build that was inspired by this guide and the insights in the post were truly helpful, particularly the guide for replacing the WiFi/BT chip. I'm using a Core i9 9900K with an NZXT Kraken x52 and a blower style Vega 56 GPU, all of which fit...
When specs are taken into consideration, the monitor is actually reasonably priced. It's a stunning feat of engineering. Unfortunately, I cannot fathom why the stand is $999. I'm sure plenty of thought went into the design to make the monitor feel weightless, but the price does feel excessive...
I had high hopes for the Mac Pro, and while it's no doubt a beast of a machine, it still missed the mark IMO. What Apple's lineup lacks is a prosumer-grade Mac that is not an all-in-one and comes with a decent graphics card. Perhaps a larger Mac mini that can accommodate (and effectively cool)...
I had a similar issue, though not related to the update. In System Preferences > Energy Saver, do you have "wake for network access" enabled? If so, try disabling and see if that solves it.
Some other things to try would be to reboot your iPhone and Apple Watch, then uncheck and re-check the...
Bumpy update but working. Required more patience than previous updates, especially toward the end when the installer seems to be frozen on a black screen. Ultimately, it worked.
Anyone having issues with Auto Unlock with Apple Watch? I'm using a BCM94360CS2 card and everything is working, including handoff and continuity, but unlock with Apple Watch still prompts for password after wake from sleep. If I click "cancel" at the login screen and try again, it works, meaning...
Darkwake=0 broke Power Nap for me (I use it constantly for cloud syncing and Time Machine). With Darkwake=8, things are generally stable. One quirk is that if I am near the computer during a Power Nap session, my Apple Watch tends to unlock the machine, but this does not impact stability in any...
Thanks for a really comprehensive reply.
I've tried all "dummy" overclocking modes, which only include 5.0, 4.9 and 4.8 GHz. All failed on F7 BIOS in one way or the other. At 5.0 and 4.9, MacOS be stuck in a boot loop 3 out of 4 times, and the 4th time wouldn't let me past the login screen...
For some strange reason, updating this motherboard to the latest bios (f7) has ruined my ability to overclock the 8700k using the auto settings. I get everything from kernel panics to system freezes. Switching back to f5 solves the problem. Anybody else facing similar issues?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.