This guide worked well for Polaris cards and earlier:
https://www.tonymacx86.com/threads/guide-how-to-patch-amd-framebuffers-for-high-sierra-using-clover.235409/
But sadly trying to use the same tools to get connector information out of the bios dump for Navi cards does not work very well. I...
Try the whatevergreen boot option `agdpmod=vit9696` to disable board id checks. That is needed on my 7740 for the external displays connected the intel graphics card to be detected with the Nvidia graphics powered off.
Yes, I do believe that fix is by using "agdpmod=vit9696" boot option to disable board id checks. Oh, and of course you have to be using the bios graphics mode where HDMI / USB-C is connected to Intel Graphics - so verify it is working that way in Windows or Linux first.
I still have not put the...
I noticed today that HP added a RX 5500M 4GB option to the Zbook 17 G6 configurator. It is even slightly cheaper than the lowest end Quadro. That is certainly a far better option than the WX7130 available on the Dell Precision 7740. I don't know how the WX4170 turned out working but this new...
Attached is the EFI I have so far with my Precision 7740 running 10.14.6
You will probably want to use the Whatevergreen -igfxmlr boot option if you have a 4k panel. The P630 iGPU may need a device-id spoof to work as a UHD630.
The graphics mode being reset is fixed by _OSI hot patching to...
Yes, you would want the F16M heatsink. I think it means Firepro - Version 16 - Mobile.
Interestingly enough, I spent some time trying to setup a hackintosh Dell Precision 7740 with a WX7100. It did work out of the box but in the end I decided to switch to a different configuration with only...
The Zbook 17 can accept both MXM B and MXM A cards. The smaller Zbook 15 can only accept MXM A. You should be able to use that WX 4170 if you can find a Zbook 17 G5 heatsink for it. It may even work with the T1000 heatsink if its also MXM B, but be sure to carefully compare the cards to make...
Can this card be used in the WWAN slot on the G6? I was under the impression that this model and the previous G5 uses soldered wifi so the Intel card can't be removed.
Also, have you considered using the Zbook with no GPU installed at all? The Zbook 15 G3 worked this way (you could just take...
The only good option in production right now is the Dell Precision 7740 with a Radeon Pro WX7100. We have one at work that I was able to borrow over a weekend and try out with Mojave. It is fully detected and useable with MacOS even without Whatevergreen. However power consumption is high so you...
Not that I am aware of. I believe the DP out / USB-C out are wired physically to different outputs on the iGPU, so in theory you can use them in conjunction with the dock so long as the framebuffer is patched accordingly.
I was able to get my MSI WT75 (with C246 chipset which is very similar to Z390) to boot a stock Unibeast High Sierra by simply updating the version of USB-Inject-All kext to latest. The one it came with by default did not have the series 300 chipset ID's and would not boot.
Yep, good catch. I was actually able to upgrade the firmware on my PM981 to 301Q EXA7, and restored a 10.13.6 clone from a 970 Evo, but it was still unstable booting up or trying to do any kind of intensive reads or writes. My MSI laptop has a Nvidia GPU so for now I have only tried High Sierra...
I have a PR open for AppleALC to add MSI WT75/ALC1220 support. You are welcome to try it with your GE63 to see if it helps. You will need to use layout 15 to enable it. You may need to disable the HDAS -> HDEF patch in config.plist for AppleALC to load.
You could try running this utility to update your PM981 firmware:
https://pcsupport.lenovo.com/us/en/downloads/ds119265
You have to have one of the Lenovo computers listed on the supported models list for it to work. mhafeez is using EXA73L2Q firmware according to the screenshot which appears...
I use the Zbook 15 G3 as my primary work machine. It works great, other than bluetooth on the broadcom 94352z will intermittently not work on boot or resume. I eventually decided to just disable it altogether.
With this model, the dedicated GPU is MXM 3.0a, aka modular. It is possible to remove...
Just a thought but you may be able to get farther booting on the laptop if you connected an external display to the Thunderbolt 3 port on the back. That port is always connected to the Intel GPU, even on GSync models, and is the reason why the Intel GPU is still shown in Windows. I have a cheap...
I forgot that these docks had a firmware update available to improve display compatibility, you may try applying the update if you have a windows partition you can boot into easily. It is available from this HP KB article.
The DP connectors on the Ultraslim 2013 dock are connected through a Synaptics DP MST hub that is built into the dock. The hub may be interfering with detecting and using the displays because AFAIK OSX doesn't support MST hubs on Intel graphics.
I have tried it on both a Zbook Studio G3 and Zbook 17 G3, both which are models with the 6700HQ and Intel HD530 graphics only. I got a DW1560 (Broadcom BCM94352Z) to replace the Intel 8265 Wifi, and use a Crucial MX300 SSD as the boot drive. I have everything working so far other than...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.