Thanks for this guide @jimmakos01. My system is very similar to this and I got everything running short of USB 3.0 working correctly - they work fine as USB 2.0 ports however. I still have not gone through to map them. My board is the H270M series.
I also have a random issue where my screen...
I currently have my setup to IGPU disabled and Graphics to PCIe-3 1. I have no operational issues with my NVidia card. I have not looked into AirPlay or Quick Sync. My primary interface is an Apple TV device, not the actual hackintosh, so AirPlay goes through that. I have no idea what Video...
I went through and verified the settings were correct as per that article and they are. The kext files are located in the /library/extensions/ directory. Running the kextstat command, I can find the USB Inject All kext loaded, however I did not see the XHCI port raise kext loaded.
I don't mind a tag along at all. As Pastrychef indicated, have you tried using the card without the new drivers? I would try that first to better understand if the issue is driver or not.
I still have to resolve USB issues, but once I do that I will develop a guide for my build.
Thanks, I will look for the guy. I suspect I may have crossed this already and he had a link to download a prepared High Sierra EFI file. However, I am dubious to accept that file though. For one, I don't know the guy or his background and he did not seem to have a community backing like...
This is great to here! I have a very similar build and had problems at almost every step :D
GA-H270-DS3H, i7-7700 Kaby Lake, GA GeForce GTX 1060 6 GB. M2 Samsung 850 EVO SSD, Seagate Barracuda 3TBs x 4 for HDD1 thru HDD4 which will be in a RAID 10 configuration for 6 GBs. I plan to run this...
Did you try the disk utility fix to reveal un-initialized SSD drives?: https://www.tonymacx86.com/threads/solved-missing-sdd-hdd-disks-on-fresh-high-sierra-installs.235791/#post-1616040
Thanks. I have a LAN wire tester and confirmed my 4/5 pair is "open" so I need to check the terminations on each end. This is the 3rd cable I have had gone bad in my house, so perhaps they were not punched tightly enough. I did install the v2.2.1 driver first and it did not work as the...
I have a bad patch cable in my attic between the TV and panel box. Second Cat 5 jack I have had go bad on my. Looks like I need to spend a few hours testing all my jacks. Hopefully its just the punching working loose and not something damaging the wires.
Thanks, I plan to do the same tonight and will report back. I understand that for kexts, you can simply delete them to remove them, however to add them you must run multibeast or kextbeast. I am curious as to why that is. Seems like a configuration file is modified to add, but not required to...
I tried this last night on my board without the success. I will be attempting some other driver versions tonight. My board is the GA-H270-DS3H. I am in High Sierra.
I am currently using system definition 18,3. I did install them using Kext Beast, but thanks for the tip, we had not discussed it, just came across it on here. However, I did move the files from there to the EFI directory based on some other readings on here and I believe that was the final...
I think I made some progress tonight. I am now loaded in. I ended up deleting the Lilu and GraphicsFixUp kexts, which might have been your recommendations - sorry I don't remember anymore. I also followed Stork's guide at post #2 regarding uninstallating and reinstalling the drivers. The...
I did. I followed the step outlined here:<link removed for "How to properly Install Nvidia Drivers on High Sierra 10.13 (17A405)" due to moderator approval requirements>
However, once I installed the recommended kexts and Nvidia drivers, i only successfully boot to a solid black screen. So I...
These are the kext files I have installed in the Library Extensions folder. Does anything seem unnecessary or missing?
ACS6x
ArcMSR
ATTOCelerityFC8
ATTOExpressSASHBA2
CalDigitalHDProDrv
FakeSMC_ACPISensors
FakeSMC_CPUSensors
FackeSMC_GPUSensors
FakeSMC_LPCSensors
FakeSMC
HighPointIOP...
@pastrychef, I have completed the steps above through item 8 and I still get the kernel panic and reboot. The drivers were added as per your instructions and Clover Configurator now recognizes them...so I got that right but still no fix. I will be looking at the video card drivers but could...
My M.2 is 500 GB (PCI SADA) and my HDDs are 3 TB SATA. I don't have any smaller ones, perhaps some old IDE's laying around but I would have to install them as USB. I honestly don't mind doing the install twice lol. A little more work but I'm learning as I go.
Yes, I do see it. I...
You might be tackling the brick wall wrong. Use the thicker part of the head up top :)
Im learning this is easier done than said...a play on an old saying.
Yes you can, but it seems you cannot delete via multibeast. Additionally, what I am fining is there is a minimum mix of drivers required...
Yes I can. I can boot from the USB into the USB Installer OS. I cannot boot from the USB to the MacOS installation after Multibeast. FWIW, I can boot into it before Multibeast.
Yes, but my options are then limited to disk utility, reinstall and terminal. Recovery from Time Machine did not...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.