1080p worked - I used hackingtool to extract the right framebuffer settings (see my older posts in this thread) and put those into my plist. I'm myself not that involoved to change low level stuff in efi.
I feel you! I love this gem, but it is for me way too expensive and I have the fear of...
Did try that, did not work in any way. Same symptoms as before.
Resolution was fine. I'm about to sell my stuff so no further testing possible.
Thanks for the run!
Did try it out -
So plugged in at boot recognizing the RX580 as PCIe, short flicker of eGPU next to wifi icon saying "no device".
Shut down and booting without plugged in eGPU. Plugged it in - appears in PCI, again 2-3seconds icon in the taskbar.
Both times no drivers loeaded.
Edit 2: No...
Another update: fixing overly sensitive trackpoint is easy!
As suggested by https://github.com/littlegtplr/Hackintosh-X230-macOS/issues/1
I went into /L/E/VoodooPS2Controller.kext/Contents/PlugIns/VoodooPS2Trackpad.kext/Contents/Info.plist
change MouseMultiplierX and MouseMultiplierY to 2 -...
seems you are ahead of me!
I don't have the controller listed in PCI if there is no device attached before boot! (needs to be cold boot, restart doesn't work)
I use SSDT-THBT.aml - sorry not a kext, my bad.
Try using the
"invalid ig-platform-id (0x12345678)" worked for me to install (leads to some graphic glitches and 14MB framebuffer but can be fixed afterwards) - found in original guide. Did you read through that? Is your bios up to date? You can't just copy the patched folder - you have to dump...
Addition to Hibernation:
sudo pmset -a hibernatemode 3
Using https://github.com/shockingpants/ThinkpadX1Y3/tree/master/ACPI/USBInjectAll_Custom_SSDT .aml in my patched folder in clover efi
and the patch for my DSDT from mentioned...
I just copied cpufriend kext from the hackingtool dump. The script in the repo does help tho ;)
I don't use your uploaded clover but built it myself. I don't config tb3 since there is not much to config. Just using the kext.
Sometimes I have a kernel panic at shutdown that may be related to tb3...
nice thanks @jamesxxx1997 tried cpufriend but missed the dataprovider. now I#, down to 800MHz in idle and consumption is 2W Package down from 5.5W!
PS: RX580 TB3 PCIe device
Guys, I did my first Notebook build with the X1 and this guide.
Changed SSD to EVO and replaced wifi with DW15XX.
Works like a charm after BcrmFix etc.
What I have to add:
- TB is working (eGPU RX580 8GB) with the boot trick from here...
Looked into it on my rig:
xxx-iMac:~ bac$ cd /System/Library/Extensions/VoodooHDA.kext/Contents/
Info.plist MacOS/ PkgInfo Resources/
then use the editor of you choise (nano, textedit,..) in my case atom:
sudo atom /System/Library/Extensions/VoodooHDA.kext/Contents/Info.plist
Line...
First of all:
1)get VOODOOHDA https://sourceforge.net/projects/voodoohda/ (2.8.8 worked for me, did not update yet to 2.8.9)
2)Install it and turn your sound down if possible
3)reboot
4) now your output should work already EDIT: loud and cracking since gain is at 80%
5) navigate to the .kext...
WORKED FOR ME TOO on Sabertooth P67 with BIOS 3306. Never before it worked!
Don't see that either but it is installed in:
/System/Library/PreferencePanes/VoodooHDA.prefPane
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.