Search results

I previously used an XFX HD6870 to drive my 2560x1440 res 27" ACD by plugging it directly into the Mini Displayport. I think that you would have no problem with a second monitor using that resolution, as long as your using one of the Mini Displayports on the card to drive the second monitor...

What SATA controller are do you have it attached to? Dil83

Try installing my kext here: http://www.tonymacx86.com/mountain-lion-desktop-support/82525-dvd-drive-eject-button-dvd-player-fixed.html#post511155 This will ensure that your DVD Drive is detected as Internal instead of External, which is a problem that started when Mountain Lion was...

SATA mode needs to be set to Normal, not Legacy in BIOS. If that does not solve your problem, then your BIOS doesn't support AHCI which is necessary to boot OS X. Do you also have a RAID option for your SATA mode? Dil83

Your motherboard has VIA VT1705 onboard audio, which is not supported. The good thing is that as long as you have the original AppleHDA.kext installed from 10.9, then as long as the DSDT edits are correct and your graphics card codec id is present in the kext (it is), then you will have HDMI...

OS X requires you to have SATA mode set to AHCI. To enable your Windows 7 installation to boot from AHCI mode, see here for the fix: http://support.microsoft.com/kb/922976 Dil83

Try this one, I changed it a bit and added some values I missed. Dil83

Upload another IOReg while using the DSDT I uploaded. Dil83

Here's your edited DSDT. Put the DSDT.aml file in your /Extra folder and then reboot. You should have working HDMI audio. Also, you no longer need to use GraphicsEnabler=Yes or AtiConfig=Uakari. I added that info directly into the DSDT. Dil83

Yes, DSDT is the next step, but we will also need a copy of your IOReg in order to find your graphics card location. It's possible to add the Uakari framebuffer directly to your DSDT so it is always automatically loaded with your card. You would no longer need to specify Uakari as the...

Here is the Uakari Personality from 10.9 Mavericks: Personality: Uakari ConnectorInfo count in decimal: 4 Disk offset in decimal 635392 0000000 00 04 00 00 00 04 00 00 00 71 00 00 12 04 04 01 0000010 04 00 00 00 14 00 00 00 00 71 00 00 01 12 01 03...

I'm also running 10.9 Mavericks. You can just post the output of radeon_bios_decode and redsock_bios_decoder so we can get all of the values that need changed. No need to post the output of ati-personality.pl since we're both using Mavericks. Dil83

Please add the Xeon W3680 processor. Thanks!

Download radeon_bios_decode.0.2.zip and ati-personality.0.12.zip from the bottom of the first post here: http://www.insanelymac.com/forum/topic/249642-editing-custom-personalities-for-ati-radeon-hd45xxx/?p=1646480 Also download redsock_bios_decoder from the bottom of the first post here...

You replaced two of the connectors with two HDMI ports in the frame buffer for a total of three HDMI ports defined. Only one of them has the proper sense id which is 5 according to your VBIOS dump, and 3 of the 4 connectors in your edited framebuffer are sharing the same Hot Plug ID. Leave the...

You don't need access to the wired connection, you just need your system to detect a working ethernet port set as en0 in System Preferences in order for iMessage to work. Ethernet must be detected as the primary network adapter. As long as it's considered the primary network adapter, you can...

I was able to figure out how to accomplish this by trial and error. Just need to add this to the config.plist: <key>smartUPS</key> <true/> That key changes the system-type to <03> just like a genuine MacPro5,1 shows in it's IOReg. Changing this value added about 1000-1500 to my...

How do I change the system-type to <03> (Workstation) instead of the default <01> (Desktop) that Clover uses. I can't seem to find this info anywhere, and my system performs better using the Workstation system-type along with the MacPro5,1 model. Thanks, Dil83

I started over with the original 10.8.5 ATI7000Controller.kext, and edited the framebuffer EXACTLY as described in your directions using my HDMI sense id. No change whatsoever in IOReg output and no HDMI/DisplayPort output option in System Preferences. Thanks, Dil83

I already decoded the VBIOS and edited the framebuffer long ago. The Aji framebuffer hasn't changed in any of the updates since, and the edits have been reapplied to the 10.8.5 ATI7000Controller.kext, and been tried in several different variations. Here is a link to the framebuffer edits for...