THANK YOU THANK YOU THANK YOU Tomato Bob! :clap: Clover was not automatically booting ANY OS. It was just waiting indefinitely for me to choose until I set the option in System Preferences -> Startup Disk in OS X...
Now I am automatically booting into OS X with a 5 second timeout option to...
Uh Oh. I just re-installed Win7 (UEFI style) and now I can't boot into Clover (regardless of what boot priority I choose). The boot options in the Bios don't show the UEFI version of my SSD where yosemite is installed anymore... There is only a P0 SSD drive showing (which was my Chimera boot...
I will re-install. I need to do it anyhow cause I accidentally installed 32bit Win7 when I want 64...
So, if you have both OSes booting with Clover do you just select which one each time clover loads? Or can you set it to automatically boot straight into a certain partition each time (but...
OK. So I did as you instructed defbref.
After a bit of work I got clover installed on my Yosemite SSD partition and my machine is booting into my original OS X install using clover with no problems! :headbang::headbang::headbang: Thanks for helping me understand this UEFI stuff...
I am...
Got it. I did notice the two options already.
I will do as instructed and update here.
Again, thanks for taking the time to help me get up and running... :thumbup:
I just did that. And it booted into my SSD installation of Yosemite faster than it has ever booted! I am writing this from my hack now. It's been a good 20-30 minutes runtime and everything seems to be working fairly well. No freezes like I had before either...
And could my machine be...
I was not actually clear above. Once I got into Clover I selected the "Install OS X Yosemite" usb partition. The OS X installer took awhile but after 1-2 minutes it booted and gave me all the normal OS X installation options. That's when I shutdown...
Once again defbref you were correct. I wasn't booting into Clover... I had no idea what it was supposed to look like until now...
NOW I am making some progress :D
I read somewhere that Clover can be picky about what USB port you use and it is related to power requirements. All along I...
Yes. When I set my bios to boot with USB as highest priority I believe my machine is booting using Clover. I get the normal boot selection screen (that looks just like Chimera) and it shows my original "Yosemite" installation. If I do nothing it boots into Yosemite properly (although I...
OK. Not really sure how to do that. I was just going to start fresh to make it simpler.
I am new to Clover so I don't really understand how it works very well.
If I can't get the installer to boot using clover on a USB drive then I'm not sure I can get the OS to boot with Clover on my SSD...
Can anyone help me here?
Not trying to hijack this thread but I have a similar motherboard and trying to install using Clover. Getting a panic error using the installer on the USB stick. Dont' know what else to try. This thread helped me make some progress (thanks Snbd889) so I thought I...
Can anyone help me? Not sure where to go from here...
After a few days of reading and trying I finally got a working install of OS X 10.10.2 on my GA-Z97X-UD7/i7-4790k/SSD build using Unibeast USB stick, Multibeast and Chimera. But I couldn't get iMessage and Facetime to work properly so all my...
Can anyone help me? Not sure where to go from here...
After a few days of reading and trying I finally got a working install of OS X 10.10.2 on my GA-Z97X-UD7/i7-4790k/SSD build using Unibeast USB stick, Multibeast and Chimera. But I couldn't get iMessage and Facetime to work properly so all...
Sounds like you might not have cleared the CMOS somehow. Check out your MB manual. Page 23 -> Quick Buttons -> CMOS_SW
Make sure you shut down, unplug the power cord from the back of your case and then push and hold that button for a few seconds. I would also remove the GPU before you...
Glad to hear you want to be friends :) I think we can help each other.
Not sure what to tell you about getting the GPU to work but I think I can help you get your onboard graphics working again. I did the same thing as you when I was fooling around with BIOS settings during my initial build...
Hey there interobang -
Looks like we have an almost identical setup so I thought we might be able to help each other keep our machines running smoothly. This is my first Hackintosh but I've built many PCs and have an engineering degree.
Please let me know if you have problems getting anything...
PROGRESS REPORT!!! :headbang: :
Wow, after two solid days of troubleshooting and putting together the above details I realized I needed to update to OS X 10.1.2... Immediately after writing the above post I updated OS X via the integrated OS X software update, re-ran multibeast, rebooted and...
I have been working to get my analog speakers working for two days. No luck. Been through your guide Toleda and I believe everything checks out. About to give up and go USB audio... :banghead: :oops: It looks like my HDMI audio may work but I don't have any speakers connected to my HDMI...
I am building my first hackintosh. I've got it all built using parts exclusively from TonyMac's CustoMac Pro buyer's guide.
I'm about to install Yosemite but I've decided I'd also like to use an old IDE hard-drive and an old IDE optical drive for additional storage. (These will be in...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.