Search results

T Thank you, will rebook into the patching and whats not

I just swapped my 94352HMB for a 94360HMB and have since removed all the text patch for 94360 except the Airport Extreme name patch. Since the card is native supported, do I have to remove the Bluetooth patches and such from /S/L/E? I yet to really test the bluetooth, but it doesn't seem to see...

Handoff was working fine before the 10.12.1 update, previously using the FakePCIID and FakePCI_Boardcom kext words just fine. But after the update to 10.12.1 everything goes haywire. Everything was the same as in 10.12 but Handoff just isn't working. I know see no point in posting stuff...

This was what #2135 was trying to say I suppose, the FakePCIID injection is not working. :x Anyway, I skip the SSDT injection and just use the Kext Edit injection and everything is back to normal. Even after removing the "3 PCI fixes"

#2135 is exactly the config with the problem.

Read post #2135. I said "I would DISABLE to 3 PCI fixed and redo all the screenshot and attachments.", so ended up with a configuration which is not have WIFI working. So from that #2135 I removed the FAKEPCIID_BoardComm and use your SSDT enabler and still it doesn't work. SUMMARY #2133 -...

I swore it was RP04 but nevermind. Either is not getting the hardware detected. Ensure that SSDT is patched, removed FakePCIID_Broadcom_WiFi.kext but still the hardware is not detected in System Report. 37:984 0:003 Inserting SSDT-ARPT-RP05-4352.aml from EFI\CLOVER\ACPI\patched ... Success

Airport/WiFi Injection Methods (10.12/10.11/10.10 - all versions, select one method) kext enabler, see FakePCIID for BCM94352 README: RehabMan/OS-X-Fake-PCI-ID Download: RehabMan / OS-X-Fake-PCI-ID kext edit/Info.plist, see [Guide] airport_pcie-hm_plist_edits.pdf (repo) dsdt edits, [Guide]...

The attachments are exactly what you requested. Screenshot and attachments, ain't it not? I figure the best way was to use the IO80211Family kext from 10.12 but after applying the PCI fixes it miraculous works even though you kept mentioning it to be useless. In the course of testing I did...

It's working now with the additional 3 PCI kext patches which I know as you mentioned shouldn't be used but what the heck I attached everything required as below of a working wifi in 10.12.1 Problem Reporting (post to this thread with attachments) WiFi Hardware not detected in 10.12.1 10.12.1...

In 10.12.1 I used FakePCIID kext enabler and doesn't work anymore. It was working fine in 10.12, using the fcvo patch and the 5Ghz #a patch. My device id is 14E4:43B1 BCM4352 802.11ac Wireless Network Adapter 10.12.1 has been a hassle so far. Console is spaming this if it matters...

I have only my keyboard and mouse connected. Don't remember I need anything additional in /S/L/E as I'm using Clover and has kext patches on-the-fly, gonna try to boot without caches in awhile. EDIT: Nada, without caches also produce the same prompt. Guess last resort is a clean install of El...

I'm getting the "You shut down the computer because of a problem" loop. Did a straight upgrade from Yosemite on Clover and everything look fine but I keep having this prompt on every boot. *** Panic Report ***panic(cpu 3 caller 0xffffff80007c1cde): "launchd died\nState at Last...

Just to comment I observe the same kext reloading and losing all 5Ghz channels.

I realise if I were to switch SSID after boot, the kext seems to reload thus losing the patches. On boot usually I was connected to SSID, if I were to change to SSID_5G it'd timeout and System Reporter would not have any 5Ghz channels. I've set the SSID_5G to higher priority thus eliminating...

Do anyone replace the values via Clover - Kext Patches? Someone on my system it doesn't stick. I can see the 5Ghz SSID for a few seconds upon boot but it'll disappear and System Report would report the Channels supported to be 1 to 13 only.

If I were to employ FakePCIID for BCM94352 method do I still need the 5GHz patch? Seeing it already faking to a BCM94360. If so, anyone has values to search for 10.10.3 for ROW?

Alrighty! It's working, I guess I just didn't wait long enough. There is a almost 30 second of nothingness before the desktop comes up. -v doesn't shows anything. Where can I start to troubleshoot this? Would posting the bdmesg help? Chameleon 2.3svn (svn-r2538) [2015-01-18 09:46:27]CPUID Raw...

Long throw, IGPlatformID=0D220003 ?

Have you gotten any solution? My situation is the same as you, do a -v to see what's going on. Have you booted before the installation of the GTX 660?