Thank you so much for all the help!
The last thing is trying to get the DisplayPort to work reliably, but I think it's more of an issue with the dock than with macOS. If I connect to the DisplayPort on the dock while macOS is booted, I get full resolution and refresh ranges, but as soon as I...
Thank you! I noticed that as well haha, I just grabbed the download from the Downloads section, but I'll go back to the source and download the latest version!
AYYY it shows up now! And now my Thunderbolt controllers show up in System Profiler.
AND HOTPLUGGING WORKS! Both the TS4 and the...
I downloaded OpenCore Configurator, and here is the requested screenshot (I'm on OpenCore 0.8.1 however)
Am I booted to the correct disk - I accidentally booted to the wrong one earlier, but still ruled that out, and I'm still not seeing UPSB or the other devices.
EDIT: hold on, I just noticed...
Okay so I got out the TS3+ dock, which is PCIE only - I think part of the confusion that happens with the TS4 is that it is a TB4 AND USB4 dock, so if it fails to connect over TB4, then it will just revert to being USB only. The TS3+ is only a PCIE TB3 dock, so it's easier to tell if hot...
Quick update, while I try to pull out my TS3 to check hot plug for that: It seems to be working better! With SSDT-MAPLE-RIDGE-RP01-V2.aml added in, now both PCIE and USB 3.0 works at the same time! I have ethernet working and the DisplayPort now works fully at 175hz on the dock.
However...
Hey there! Sorry for the late reply - I've been doing cable management on my build and it's been down all day! Here's the requested files. For Thunderbolt SSDTs, I have two currently in use, SSDT-DTPG and SSDT-MAPLE-RIDGE-RP05-V2. I do have SSDT-TB3HP, but it didn't seem to help so I removed it...
Okay, so I generated the bootlog twice - once when the TS4 is working with PCIE at boot, and then restarted the machine, and generated it again now that PCIE is no longer working (it seems that *restarting* the computer causes the port to stop working, whereas a full shut down and cold boot...
Thank you so much for the reply!
I can look into renaming the Z590 controller if I need to, I used to know how for Z97 but I'll have to look into it again!
I do have SSDT-DTPG.aml in my files and in my config - although I do not know where I got it from at this point, and I'm certain if it's...
Hey everyone! I'm currently working through setting up my Hackintosh for the final time, and getting it fully operational. The last thing I'm trying to work through is some bugs with the TB4 Maple Ridge controller, which I'm getting closer, but having some oddities when working with it.
As a...
Thank you very much!
I don’t mind my fans running all the time - I’ll be switching to a waterblock liquid cooling set up anyway soon, and right now it keeps the GPU idling at 52° instead of 66°!
For a reference model Sapphire 6900 XT, would it help or hurt to add this line?
<key>device_type</key>
<string>ATY,BelknapParent</string>
And is this line applicable for just a single card?
<key>AAPL00,DualLink</key>
<data>0AAAAA00</data>
I use this! https://github.com/aluveitie/RadeonSensor
I use only the kext with iStat menus - I dropped it into EFI/OC/Kexts and added it to my config.plist. Temps seem in line with Windows reported temps so I think they’re fairly accurate, or at least useful for reference. Without the...
So my post was removed because "this is not a LAN thread" (perhaps it was my post above that was supposed to be deleted?) but my question was directly related to the GPU related issue, so I'm going to ask it again if everything looks alright with my set up.
I applied the new framebuffer to my...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.