Search results

Has anyone succeed to make the Geforce 760 work with Lightroom? I'm on latest OSX version, latest update on Lightroom, native Nvidia drivers, but still same problem.

Can someone please explain to me what these 2 codes mean "Locale" and "Country" and if it does matter or not what we have? I have listed as bellow: Interfaces: en1: Card Type: AirPort Extreme (0x14E4, 0x855C) Firmware Version: Broadcom BCM43xx 1.0 (7.15.124.12.8) MAC Address...

== I noticed that when I plug in the headset into the USB port, I get these messages bellow in the console logs: 24/07/14 11:51:51,000 kernel[0]: WaitForCMD: Timeout waiting for command completion (opcode 0xb), 100ms 24/07/14 11:51:51,000 kernel[0]: CommandAbort: Timeout waiting for command to...

Nobody has any "solution" on this matter? It's weird that the USB device is not mounted at every boot, it's probably something with the AppleHDA.kext modded for alc1150?

So, that means that I have to set the multiplier to 40? (40x103=4120mhz) === Edit. I went back to stock (so no OC) and run the SSDT script with no other inputs. I get during boot that XCMP is OK, no other weird messages, but I'm not 100% sure that my PM is working properly. See bellow: ===

I used XMP profile 1, so it's set to auto. Using CPUz in Windows looks like it's set from 8 to 40 (fsb 102).

I have tried this procedure, but..getting some weird issues at boot and also the CPU load at "idle" is around 2-4Ghz.., which wasn't before. (at idle was arroung 800Mhz) == 22/07/14 16:29:19,000 kernel[0]: IOPPF: XCPM mode 22/07/14 16:29:19,000 kernel[0]: XCPM: P-state table mismatch...

Thanks for the reply, but....I did that and if I go beyond the right disk icon then it's back to second row, with options and all. I tried multiple themes and yeah....it's only showing NTFS disks and the OSX installer. It's something wrong, like all my Mac disks are "invisible" or not loaded...

Hi, i'm trying to go from Chimera to Clover and wanted to test first the boot loader on a USB, before moving it on the main HDD so, I followed the guide on the forum to install clover on the USB stick (formatted also the EFI as fat32) but....not sure why when I'm booting from Clover I cannot...

SpecialOz would you mind giving me a hand with Clover config. I know that you are using Clover on a USB to boot into the OSX and was wondering if you can share how you make that USB. I have tried today a couple of times using the guide from the forum, but whatever I did, I cannot see my OS X...

I installed Clover on a USB Drive, following this guide (wanted to be sure that all is good before installing to the HDD), but when I boot, I can only see the NTFS drives, none of the OS X ones. Am I missing something?

[SUCCESS]GA-Z97X-UD5H / i7 4790K / 32GB / GTX 760 / 10.9.4 Your geekbench results are good, since you're running 32bits bench, not 64. Also, you're not doing any OC, so again..the results are GOOD! Try running Geekbench 64bits tests, the results will be much better.

After farther testings, looks like I can only get the USB headset "mounted" if I power off the system + switch off the power from the source and then, power on + boot windows. After that, reboot in Mac OSX and I can see the device, but after the next reboot the device is gone :banghead:

Thanks SpecialOpZ's, but that HDMI tutorial it's a bit out of my league, at least so far :) Right now I have other issues more important than that, also with audio...like my USB headset Jabra biz2400. For some reasons, the device it's not recognised by the OS, even though one time I could see...

Weird, yesterday I saw the device and it was working fine, without doing anything...but today, after night....no more. I remember that, when it was working, I saw some information about the USB audio injection or something during boot (using verbose), but as I said...today nothing :( Anyone...

Hi, I have build a system based on the Asus Maximus VI Formula, using the Multibeast 6.2.2 ALC1150 drivers and I'm having issues with a USB headset (Jabra biz 2400), meaning that the device is not recognised, so I cannot use it in Skype or Lync. Can anyone help me please with this? I'm...

Devil's Canyon build: i7 4790 - GA-Z87-HD3 - 8GB 2400MHZ RAM Thank you so much, I installed the 6.1 Multibeast drivers and got no issues with sound after sleep (tested last night) Cool. It was even more super cool if that would have solved the HDMI audio, but...that part seems a bit more...

Devil's Canyon build: i7 4790 - GA-Z87-HD3 - 8GB 2400MHZ RAM Hi, would you mind posting somewhere the whole geekbench result, I'm curious to compare with my build (same CPU, but different MB and RAM) Regarding the audio, I have the ALC1150 driver from 6.2.2 and I also get the "after sleep"...

I had also my system freezes on me many times, but I think it was related to the front USB ports (not 100% sure though) One other issue beside HDMI audio that I have is with deep sleep. After the system goes into sleep, I have no audio. (drivers used from multibeast 6.2.2)

I found some pdf with the "instructions"...but it seems way to much for me to understand the steps :( Also, in the pdf it was mentioned Mavericks version 10.9.2, that means that 10.9.3 is not yet supported? I'm sorry If I seemed a nob, but I really don't understand the instructions :(