Search results

Hi everyone! I just wanted to post my findings upon fiddling with this card in both my desktop (Asrock Z390 Phantom Gaming) and my laptop (Dell Inspiron 5370). On both systems I can get this card to work wonderfully well and even enable Airdrop etc. HOWEVER Both devices (and actually my...

I can confirm that this totally works! I also found a new and improved solution for audio: AppleALC.kext together with Lilu.kext https://github.com/vit9696/AppleALC Lastly, I started off with Rehabman's config.plist for HD3000 on a 7-series laptop and tweaked it to my taste...

I didn't notice any difference between my original BIOS being 1504 and the update to 2202. However, I used the rename tool on windows to rename the update file on a freshly formatted USB drive https://www.asus.com/Motherboards/MAXIMUS-VIII-GENE/HelpDesk_Download/

I followed this guide, but basically what went wrong is that the uefi bios kept showing "windows boot manager" as the only option for the SSD. I finally solved it using this thread: https://www.tonymacx86.com/threads/add-windows-10-boot-efi-after-installed-os-x-clover-uefi-simple.182919/page-3...

Thanks for this guide! I followed this one and the one from Stork to install Sierra on the gene. However, I can't get clover to work on the EFI partition of my M.2 boot disk. Here's what I noticed: When I format the disk, install macOS first and windows 10 later, pressing F8 while booting...

Thanks for keeping this thread going! :clap: My Acer s3 motherboard died a while ago and I managed to find a cheap replacement motherboard. Unfortunately it doesn't have the i5 and the intel HD 4000 combo but instead it has a core i3 and an intel HD 3000 on a 7 series chipset :|. I'm currently...

Here are some more pictures of the finished project: I put together a little video with the end result here:

Finally finished :D I managed to clean up the look of the front panel by adding a vinyl sticker around the less pretty parts. I also added some mesh over the hole for the PSU, it's looking much cleaner now. I painted the opening side panel black from the inside, so the cable mess wouldn't be...

Hey! I don't own this pc nor any of this hardware anymore, so I couldn't tell you. But I would say that it should be possible, albeit without the asmedia usb controller. Try to turn off as many devices in your bios as possible to get to the installer and see how that fares :)

Thanks :thumbup: Here's what I'm staring at right now :) I closed the case and experimented a little with where to put the UV leds to get the best result. This is what it looks like now: Unfortunately, the panel is not as clear as I'd have liked. The pictures you saw here are without...

Small remark on the side: Isopropanol actually does work! It did however take 2 days before the paint started to peel off. It's less messy than the nail polish remover where the paint became half liquid and left marks behind... Hoefer.de is a German chemistry web shop and they sell 6 liters for...

Following the Candy Apple mod, I soaked the side panel in Isopropanol in the hopes of removing the paint and achieving a clear panel as a "window". I let it soak for about 4 hours before I tried removing the paint by wetsanding it with 400grid. It didn't work. My second attempt was with...

Since everything seemed to be going so well, something obviously had to go wrong somewhere I had just finished filling up the loop with distilled water (to remove factory dust etc before putting in the UV liquid) and powered the system on when I noticed that my motherboard keeps hanging on the...

It's finally coming together! Routing the cables took so much time, but I am pleased with how it turned out, given the limited space to work with! Since the pump draws power from a molex connector, I needed at least one molex connector to the power supply. Unfortunately, it doesn't pass...

It saddens me that there is still no support, but as long as I'm sponsored, I thought upgrading a maximum while I still have the chance was a better idea than opening the loop next year and adding a new GPU ;-). That's why I also maxed out to an i7 and 32GB of RAM. I do plan on gaming regularly...

Xmas and New Year holiday update I finally managed to finish sleeving all the cables. It was a major pain in the &&s with the double cables, but Lutro0's guides on youtube helped a ton! I used this pin layout for my SF600 and can confirm that it works :) https://i.imgur.com/v1FAzqG.jpg...

Thanks man :). Yeah I'm a noob when it comes to all that software. However, I decided to take my front and top panel to a laser cutting service and see what they can do :)

Alphacool has released an AIO Cpu block that could work well with the radiator that you already have. The good thing is that it allows both its own tubes as well as custom loops. You could either make it look like the brilliant loop from chinese_spy or go with flexible tubing or whatever :). The...

I really like what you did here. What program did you use to make this? I would like to use it to measure exactly where to cut out etc :-)

Here is the latest update to this build. I've been extremely busy with school work and the fact that we're moving in a new house, but I still managed to get some work done. I modded the G4's front panel so I have a working Power switch, Reset switch and Power LED :). I sleeved all of it to make...