I have loaded the latest release of IntelMausi (1.0.5) in OC/kexts.
Fresh saved snapshot of plist.
Cleared NVRAM several times.
Still cannot get IntelGbE to work. This board uses the I219 variants. But, no joy with any of the current IntelMausi kexts.
Both GbE ports are enabled in BIOS.
Premature declaration of success on RevengeOfZee build. It didn't work out well and requires a redo.
Boot stick successfully copied installer to NVME.. (I think), which is a Samsung 970 and a known-good drive that has run Mojave and Catalina.
On reboot, I get ONE chance to select the Install...
I was trying to do something that Apple doesn't like... I went to disable SIP by the terminal and got a message saying that the command has to be executed from RECOVERY mode.
Is there a way around this? Even on my AppleActuals, this would be a major PitA.
My RevengeOfZee build currently runs Catalina 10.15.6
I decided to update to Big Sur and proceeded to perform the recommended updates of Lilu, WeG and AppleALC.
My current Clover version is 5119 with NVRAM emulation (installed by MultiBeast 12)
First of all, I am unable to update past Clover...
I am having an issue where I am unable to reset NVRAM on several of my hacks.
For some reason when I press F1 to access the option menu, the menu displays. But, no matter what key I press, there is no response. This is independent of keyboard type as I have tried several USB kbs in addition to...
I have a very strong need to create a standard USB installer for High Sierra. It is for a Mac Mini that went nipples up last month due to a hard drive implosion.
I have replaced the necessary hardware. But, the recovery system absolutely refuses to install High Sierra or any other MacOS to this...
Two hacks (SonOfZee and RevengeOfZee) do not remain logged in to iCloud. Actually, it doesn't seem that any services are interrupted. But, they always force me to re-authenticate when rebooting in the morning. And, the message keeps popping up to enter my iCloud password.
Older threads indicate...
I just installed a Sapphire Pulse Radeon RX5700 XT in my MasterZee build as I intend to move forward with doing some video work with the system. It seemed everything was working perfectly. Cinebench gives an OpenGL result of 123fps which, is modest-but-acceptable as my RX580 pushed 115 on the...
This is regarding my 'MasterZee' i7 8400K build. Running with iMac 18,3 SMB
I have recently updated to Catalina. After which, I was unable to connect to any outside network even though I am 100% wired most of the time. This system had no issues under HS or Mojave.
I have the IntelMausi 2.4.0...
After putting it off for some time, I finally felt emboldened to update all of my systems to 10.14.16
MasterZee (Using iMac 18,3)was at 10.14.3
SonOfZee and FinalZee (using MacMini 8,1) were at 10.14.4
FractalMonolith (using iMac 19,1) was at 10.14.5
(FinalZee is currently undergoing a case and...
'MasterZee' was working great. I decided to chance an upgrade to 10.14.5 (Currently running on 10.14.3)
Upon advice, I first updated the boot-loader to the most current version in the downloads area (v4961)
This immediately went to heII on a fast train.
Upon reboot, after selecting the main...
My Fractal Monolith server build has a predictable habit of rebooting sometime in the middle of the night. There is no report of a Panic such as "Your computer was restarted because of a problem".
ASUS TUF z390M PRO GAMING
I've been at it all day. And, I am finally asking for help.
Installation from Unibeast freezes at apfs module after Broadcom card initialization
I have tried several options found in z390 threads and others.
I have disconnected all SATA drives leaving just the M.2 (PCIe) drive in.
I have used...
[EDIT: Apologies... Please move this to "The Workshop/Boot Loaders" Accidently posted in General Help]
I have been struggling with the apparently simple task of updating the Clover BootLoader. The only way I am able to successfully update any of my hacks is with MultiBeast releases. But, the...
I recently bought a used LG 65UJ7700 TV from a local seller. It is a 2012 model.
The previous TV a 60" Sharp Aquos never had this issue. So, I am likely 'S.O.L' for this one.
When waking from sleep, it is necessary to dis/reconnect the HDMI connection in order for the TV's display to wake up...
My Z390I WiFi Pro build comes with one of those irritating CNVI Intel Wifi/BT cards. I have removed it. And, currently, use a TP-link for WiFi and a BT dongle.
This has become an untenable situation with BT signal being FAR too weak to serve any real purpose. Keyboard is only 4 meters away...
See Post #10 before proceeding... The solution involved using a different adapter than the one captioned in the title.
This is regarding my Main build (MasterZee) I have a BCM94360CS2 installed and wanted to replace it with an adapter based on the BCM94360CD (reason: dedicated Bluetooth...
@CaseySJ @jaymonkey @jb007
This is in reference to my "SonOfZee" (As in son of zee b****) The configuration in the title will be of some interest to you as I have taken the skills taught in our previous FrameBuffer battle-royale (which, unfortunately, ended in a draw) and, made a bit of...
This is regarding the SonOfZee build in my build-list. (There was no selection for i5-8500 on the build-signature page)
Installed MacOS (Mojave) from Unibeast successfully. But, on reboot, Unibeast USB cannot boot back into the installed OS to run Multibeast.
Verbose boot mode hangs after...