Search results

Loading Google Results...
  1. pct

    Clover boot resolution - Why on the usb installer it is ok?

    Hi have you still the same issue ? I have the same board and same issue currently with Clover v5100 and I think I found the issue. When I boot from HDD or SSD, I also have low res 1024x768. If you check About, at the bottom of the page I guess you have : EFI Revision 2.10, Platform : x86_64...
  2. pct

    Quick Guide to Generate a SSDT for CPU Power Management

    OK. But I have the same issue with my two CPUs : Gigabyte H61N-USB3 Bios F8/Pentium G2020 IveBidge (log below) or a Gigabyte GA-H67MA-UD2H-B3 Bios F8/Core i3-2105 SandyBridge Moreover there is the -p command line option that allow to force the type of CPU, no ?
  3. pct

    Quick Guide to Generate a SSDT for CPU Power Management

    Up. No idea ? I saw other people having the same issue but found no solution. There might be a good reason why this script generate these errors Thanks
  4. pct

    Quick Guide to Generate a SSDT for CPU Power Management

    Hi I have compile errors with a Gigabyte H61N-USB3 Bios F8/Pentium G2020 IveBidge (log below) or a Gigabyte GA-H67MA-UD2H-B3 Bios F8/Core i3-2105 SandyBridge Log below is with the G2020 and -d 2 option, ACPI folder content attached. What's wrong ? Thanks ssdtPRGen.sh v0.9 Copyright (c)...
  5. pct

    [TOOL] [Generate Proper Problem Reporting Files]

    Yes Have a look at my edit of my post, I found something
  6. pct

    [TOOL] [Generate Proper Problem Reporting Files]

    Hi Try to run the script but it says I forgot to press F4 : You forgot to press F4 or Fn+F4 at clover boot screen. Please reboot and press F4 or Fn+F4 to dump ACPI origin files. But I have pressed F4 and I have the following files in origin folder : what's wrong ? Thanks EDIT : I checked...
  7. pct

    [Release] Hackintool v3.x.x

    Some updates. On point 2, I end up reinstalling Mojave and use a minimal config.plist and Mojave is now booting properly with my GT710. Apparently, my initial installation was corrupted. On point 1, Mojave and GT710 give also overscan with my TV Sony KDL-32V2500 (via HMDI or DVI/HDMI) and I...
  8. pct

    Mavericks: Native CPU/IGPU Power Management

    Hi I'm just updating my old hack (legacy boot with Gigabyte H67MA-UD2H-B3, SandyBridge i3-2105 with a GT710) to Mojave (already booting with Clover 4920, lilu, AppleALC and WEG) and soon to Catalina (with clover 5100) and was wondering which guide I should use for proper Power Management and...
  9. pct

    GT710 Mojave black screen but ok on HS

    up No one to can give me some ideas on what could cause this black screen ? Thanks
  10. pct

    [Release] Hackintool v3.x.x

    Hi I am facing 2 issues and was wondering if Hackintool could help on this: 1. Overscan when connecting to my TV 2. Black screen with a GT710 and Mojave My config : Gigabyte H67MA-UD2H-B3 with a i3-2105 (Sandy Bridge) with HD3000 and a GT710 for Mojave, clover 4920 in legacy mode, SMBIOS...
  11. pct

    GT710 Mojave black screen but ok on HS

    Hi I am updating my old hack (from Mavericks) to HighSierra 10.13.6 (17G65) and Mojave 10.14.6 (18G95) with an MSI GT710 1Gb and this works fine with HS but I got a black screen with Mojave. My MB is a Gigabyte H67MA-UD2H-B3 with a i3-2105 (Sandy Bridge) with HD3000 and a single hard disk with...
  12. pct

    AppleHDA HDMI Audio [Guide]

    Hi I am updating my old HTPC with HD3000 to HS and Mojave and need to configure again Audio on HDMI. Post #1 says it's for HD4000 and newer : knowing I will use clover and recent OSX release, should I follow this guide while I have an HD3000 or the previous guide ? Thanks
  13. pct

    Will my Nvidia Graphics Card work with macOS ? List of Desktop Cards with Native Support

    Hi I'm curretly updating to Mojave my old HTPC with a Sandybridge HD3000 which is not supported anymore by Mojave. I am therefore looking for a fanless low end graphic card. Fanless GT710 would be a good choice, quite cheap but apparently only until 2021. What would be the AMD equivalent ? Thanks
  14. pct

    Using HFS+ Instead of APFS for Mojave Update

    Jay, can you advise which tool provide this view of disk partitions ? Thanks
  15. pct

    Mojave on Gigabyte H67 with Sandybridge

    Hi everyone Now that Catalina is out, I started to update my old Gigabyte H67MA-UD2H-B3 with Core i3-2105 running El Capitan to Mojave. As at that time I did not knew Mojave does not support HD3000, I started to install with an USB Stick made with Unibeast 9.2 and Mojave 10.14.6 (18G95)...
  16. pct

    [Solved] HS install stuck at SATA on H67M Legacy mode

    Success P1LGRIM, BreBo : apologies. In my previous post, I was not clear enough : the attached file config.plist USB HS patché.plist was the file from a USB Key HS install made with Unibeast with the patch for ICH10. Thats why there was so many irrelevant entries. From P1LGRIM post, I applied...
  17. pct

    [Solved] HS install stuck at SATA on H67M Legacy mode

    Latest tests I have installed Sierra on a hard disk to see if my Sandisk SSD Plus was the root cause, and then tried again to update to HS with the same result. I also tried to patch the config.plist with ICH10 : the result when booting is in "HS update on Hard disk boot from disk.JPG" I then...
  18. pct

    [Solved] HS install stuck at SATA on H67M Legacy mode

    Thanks Brebo. Made few tests without success so far. I tried to install the AppleAHCIPort in /L/E of my Sierra disk and launch Mac Os Install in Clover on the next reboot but same result. In fact I am not too sure how the HS install works: it's adding an entry in Clover but there is no new...
  19. pct

    [Solved] Drives not showing up in installer "Disk I/O error"

    Hi I have the same problem with my old Gibagyte H67MA-USB3-B3 bios F8. Sierra is up and running, but when trying to install HS it hangs at : HID : Legacy shim 2 SATA Warning Enable Drive PHY PM Failed See my poste here...
  20. pct

    [Solved] HS install stuck at SATA on H67M Legacy mode

    Hi I have Sierra 10.12.6 up and running and I am trying to install HS. Config: Gibagyte H67MA-USB3-B3 bios F8 CPU Intel(R) Core(TM) i5-3550 CPU @ 3.30GHz Clover v2.4k r4297 in legacy mode on a SATA SanDisk SSD 120Gb /dev/disk3 (internal, physical): #: TYPE NAME...
Top