Are you booting from an internal PCIe NVMe SSD ou standard SATA hard disk? Is it configured in AHCI or "RAID" (Intel Rapid Storage which is often the default from Dell)
I also have a Dell Latitude i5-8265U and so far I can only boot macOS from an external USB drive as the...
I have a quadruple boot hackintosh with macOS Catalina, Windows and Ubuntu on one disk and macOS Big Sur on the second disk. I am using OpenCore/OpenCanopy as the boot loader on the first disk.
- Catalina and Big Sur are a no brainer as they are automatically detected by OpenCore.
I read a number of articles linking vPro the the Intel Management Engine like this one. My understanding at this stage is that the Intel Management Engine required processor features and BIOS support.
In an other thread you mentioned that the HD4600 acceleration required MEI...
I realise that your post in 20 months old and I wonder if you have solved your problem with your i5-4460 based system.
I am working on a system with the same i5-4460 processor on High Sierra and I either get a display but no accelerated graphics (when...
Does your system work with HD4600 accelerated graphics under High Sierra? I am working on a system with the same i5-4460 processor and I either get a display but no accelerated graphics (when AppleIntelFrameBufferAzul.kext is not loaded) or no display but accelerated graphics...
I truly appreciate your taking the time to look into my issue.
I have to admit that injecting an EDID was a bit of a desperate attempt as I was running out of ideas…
Now that you pointed out the missing MEI, this all makes sense: no MEI = no Azul acceleration = no display and...
Thank you for your time and advice. So:
ALREADY - config.plist/Graphics/Inject/Intel=true
DONE - config.plist/Graphics/ig-platform-id=0x0d220003
DONE - config.plist/Devices/FakeID/IntelGFX=0x0
NO OPTION IN BIOS - BIOS DVMT-prealloc 64mb
DisplayPort - digital connection to your...
I have a Lenovo M93p with an Intel Q87 chipset and an i5-4460 processor. I did a fresh install of High Sierra 10.13.6 (Unibeast) and post install with Multibeast, everything works… except the screen.
Unless I prevent the AppleIntelFrameBufferAzul.kext and...
my Gigabyte 9-series H97-D3H / i5-4460 3.2 GHz has now been performing flawlessly for over three years as a server loaded with 6 disks, macOS 10.12 server.
To the questions above, as a server, I have to admit that I don't care so much about sleep (it is always on or audio...
After months of unsuccessful attempts, I have finally managed to bring the GA-B85M-D3H motherboard back to life by reflashing the BIOS.
Since I couldn't reach the Gigabyte setup screen and the embedded flashing tools, I used a CH341A based USB EEPROM Flash hardware with an...
Thank you for your help. I tried Lilu + IntelGraphicsFixUp both in L/E and in EFI/Clover/kexts/Other without any difference.
When I let the system boot all the way (waiting over 5') and connect via screen sharing, the system doesn't have any EDID data (ioreg -l | grep...
I am still investigating the "kextd stall" and found out something interesting/surprising.
When the boot process stalls at 'kextd stall… (60s)', the systems is visible on the network and I can access its file sharing. If I wait more than 4 minutes so that the 'kextd stall' repeats...
Did you make any progress on your kextd stall 'GFX0' issue?
I have almost the same problem here, except that the time out is 60s instead of 240.
I have Lenovo M93p mini tower. Iy features an Intel Q87 chipset with a i5-4460 processor:
I do not have any additional card. I...
I am digging out this old topic to find out if this was resolved.
I am trying to use a Realtek 8169SC based Ethernet PCI card on a hackintosh under High Sierra with Clover.
I tried with your RTL8111 kext embedded in Multibeast High Sierra in L/E: No success, extension not...
I have put a brand new Duracell CR2032 battery and retried a bunch of manoeuvres including your listed above to no avail.
And yes, this mobo has dual BIOS, so it should fall back to the backup BIOS after a failed boot but this doesn't seem to work.
Thank you for the prompt response. I did check the battery : 3.03 V and I also tried with another one, but as an extra precaution I will test with a brand new one. As indicated above, I tested with everything possible removed.
One additional information: I do get the single bip...
I understand that this issue (Boot stalled at Gigabyte splash screen) may not be Hackintosh specific, but I got to this point by working on the EFI settings of my triple boot hackintosh and this is the 2nd motherboard I "brick" in that condition.
So here is the story: I have been...
I have a Lenovo ThinkCentre M93p which also uses the ALC662, under Sierra 10.12.4 and Clover 3766 and I can't get the sound to work.
- I have a plain original AppleHDA in S/L/E
- I have AppleALC.kext and Lilu.kext in EFI/Clover/kexts/others
- no audio patch, no other HDA related kext...
Prior to the actual Mac OS X Mavericks install, I upgraded the motherboard to F5 BIOS and changed BIOS the settings to: optimized defaults, VT-d disabled [1’] (may not be necessary)
Installing Mavericks on an Gigabyte 9-series H97-D3H motherboard [30+ minutes]