2 questions please
1. How do I confirm XCPM is working? I am looking at my system using IOJones and I can see X86PlatformShim. I've compared several properties and it seems the same values as the one in the screenshot.
2. In regards to editing dAGPM.kext, do I need to delete Mac-AMD and...
can someone please help me understand Table 1?
Please correct me if I'm wrong.
example: If I have a AMD R9 M3xx/Pro 4xx, then the model ID needs to be iMac17,1 or GPU power management is not going to work?
Is this correct?
After several of idleness, I get the Airport BT goes to sleep and that causes the keyboard/mouse to disconnect.
The Bluetooth enable/disable toggle is responsive too. The only way to get the input devices working again is to restart the machine.
Any ideas on how to fix?
I've attached a copy...
I want to use UEFI OSX booting on my S2600CP2 board. It's currently booting using legacy.
I'm not sure if the board has UEFI capabilities but I know it has an EFI shell and I know that when I try to boot using an Ubuntu USB installer, I use/see the "UEFI:my-ubuntu-USB-stick-here" option in the...
Having issues with the CPU performance of my Hackintosh (2x E5-2650L 1.8Hhz | turbo: 2.3Ghz - 64GB ECC DDR3).
On Cinebench (multiple runs on each OS), Windows CPU score averages around 1350 while on OSX, it's 760. There's a noticeable difference in rendering speed of the test image between...
I installed High Sierra using vboxhfs-64.efi. I was reading some discussion on the net about hfsplus.efi (this was inside the clover.zip from someone who was helping me) and I decided to replace vboxhfs-64 with hfsplus.
On reboot, the only visible volume in the Clover boot screen is the USB...
another question please. if I connect a USB hub to a USB port on the motherboard, does that increases the port number?
example: 7 ports (USB2 + USB3) provided by motherboard. I connected a 5-port USB3 (5 ports x 2 since USB3 counts as 2?) hub into on the USB3 port.
during installation, I opened up disk utility to:
1. format my single SSD to HFS+
2. create an array using 4x 1TB drive (striped)
Installer then copied the files into the SSD and rebooting. Clover cannot get to the disk selection screen. I've tried this process several times and it always boot...
The ports are provided by ASM1042a and using native drivers. The USB3 ports shows up in System Information. they are just are unusable. I tried putting the stick into the USB2 ports provided by Intel and no issues there.
any fix for this issue?