Search results

Loading Google Results...
  1. GodHawk

    Kernel Panic - Graphics Related - Please help?!

    Hello Hive Mind! I'm having an issue where I keep getting a random restart and a kernel panic. I've tried everything I know of and am out of ideas. I've attached the 3 most recent kernel panic logs here for your viewing pleasure. You can see one was using Adobe Premiere Pro, and the others were...
  2. GodHawk

    How to extend the iMac Pro to X99 [Successful Build/Extended Guide]

    Yes, Sorry, i should have said random reboots. I feel like it has something to do with CUDA as I can run ProTools all day which isnt graphics heavy, but once I open Premiere Pro or Davinci Resolve and I have CUDA enables as the Graphics Accelerator it will reboot after a few moments. If I enable...
  3. GodHawk

    How to extend the iMac Pro to X99 [Successful Build/Extended Guide]

    What guidelines am I mixing? Sorry, I'm trying to use your specific process of Broadwell-E XCPM and thats where my issue lies, as I've managed all of your previous steps except to verify the frequency vectors or what steps to fix this error, since all other tests in your guide are working on my...
  4. GodHawk

    How to extend the iMac Pro to X99 [Successful Build/Extended Guide]

    Does anyone have any help for this power cycle? It is driving me up a wall. Any expert opinions would be greatly appreciated @kgp
  5. GodHawk

    [Guide] Creating a Custom SSDT for USBInjectAll.kext

    I'm guessing the same. There are two headers on the board that are unused, 16 and 17 in the attached .pdf, so i left them in the SSDT incase we ever expand.
  6. GodHawk

    [Guide] Creating a Custom SSDT for USBInjectAll.kext

    Valid Point. Yes, I tested out every port I have with both a USB 2.0 iLok and a USB 3.0 Thumb-drive so that I would see both become activated. I also tried the USB3.0 External hub trick since its pins activate both HSxx and SSPx interfaces. HS09 and SSP5 had no response in IOReg, but showed a...
  7. GodHawk

    How to extend the iMac Pro to X99 [Successful Build/Extended Guide]

    hey @kgp thanks for the guide! I'm trying to use part of this to get my XCPM working on my broadwell chip as well as using this thread here. My main reason for focusing on this is because my computer will get under load in my editing programs - Premiere Pro and Davinci - And randomly shut down...
  8. GodHawk

    [Guide] Creating a Custom SSDT for USBInjectAll.kext

    See, didnt even know that. There are so many Years and Years of knowledge built up on this site from experts like yourself, it is hard to parse out what information is outdated and what information is specific to the OS Version, etc. Thank you for clarifying I'll keep this in mind for future...
  9. GodHawk

    [Guide] Creating a Custom SSDT for USBInjectAll.kext

    @RehabMan It looks like I finally got it working on my hack!:headbang: THANK YOU :thumbup: I wrote the custom SSDT and tested and it looks like its all working. I've attached my debug to confirm and screenshots of it showing on my IOReg. Whats interesting is that on this mother board, a lot of...
  10. GodHawk

    [Guide] Creating a Custom SSDT for USBInjectAll.kext

    OK! update, I have fixed the issue where all my USB ports were not showing up, even with the previous port limit patches I could find. I finally found this thread below - And was able to put this in in Plist Editor Pro and removing my previous kexttopatch from 15 to 24. This has now opened up...
  11. GodHawk

    [Guide] Creating a Custom SSDT for USBInjectAll.kext

    Ok, I was able to get it renamed! i had to manually edit in Plist Pro and not via Clover. I also inserted the updated High Sierra port limit patch of 24. Debug is attached as is the proof its renamed to XHC_!
  12. GodHawk

    [Guide] Creating a Custom SSDT for USBInjectAll.kext

    Ok, i am finally working through this. XHCI is renamed to XHC_ in IOReg. Attached proof! Edited manually in Plist Pro instead of Clover. I've updated my debug and I'm going to go through the guide process again, see if I can figure this out. Interesting note is that I still only have SSP1 and...
  13. GodHawk

    [Guide] Creating a Custom SSDT for USBInjectAll.kext

    Thank you, I started over on my DSDT patch and tried to do this as you can see on my attached Screen Shot in Clover. I'm not sure why its not changing.
  14. GodHawk

    [Guide] Creating a Custom SSDT for USBInjectAll.kext

    ****UPDATED WITH NEW DEBUG REPORT WITH UPDATED KEXTS debug_16630**** Hello @RehabMan, sorry its been a bit since we last discussed. I had to move offices and it took a long time to get this thing back hooked up during the construction. Here are the debug files you requested. This was run...
  15. GodHawk

    [Guide] Creating a Custom SSDT for USBInjectAll.kext

    Hello @RehabMan and thank you again for all this hard work you put into the hackintosh world. I updated to High Sierra 10.13.5 after having some difficulties with programs I have - i.e. Davinci resolve 14/15, Pro Tools Ultimate, and Premiere Pro CC - and because the latest nvidia web drivers in...
  16. GodHawk

    How to extend the iMac Pro to X99 [Successful Build/Extended Guide]

    Still looking for any help on my process...... Thanks everyone!
  17. GodHawk

    How to extend the iMac Pro to X99 [Successful Build/Extended Guide]

    Checking in to see if anyone can help to previous post. Thanks any and everyone for getting me even this far. Trying again tomorrow with @kgp updated guide.
  18. GodHawk

    How to extend the iMac Pro to X99 [Successful Build/Extended Guide]

    I'm trying to figure this out, but completely incapable. I've tried following many different build pages. Can anyone help with the following Kernel Panic (lilu triggers rebuild) and my config? Using Gigabyte x99 Designare ex AMD Radeon RX560 Samsung SSD 950 6900k i7 Drive is currently Sierra...
  19. GodHawk

    6900k, Designare x99-ex, AMD Radeon 560/1080 TI - Cannot get to bootloader

    Anyone? I can't be the only one in the world of hacks having this issue...
Top