Search results

Sorry to bump but do you have any suggestions? I also tried injecting the frequency vectors of the iMac 14,1 with pikeRalpha's script. But no change.

Of course, my apologies. Updated files are attached. bash-3.2# cat /tmp/AppleIntelInfo.datP AppleIntelInfo.kext v1.4 Copyright © 2012-2015 Pike R. Alpha. All rights reserved Settings: ------------------------------------ logMSRs............................: 1...

Check the settings on your tv and look for enabling some sort of ultra had or 4K on it. My tv had this setting and I'm hoping that's been my drawback this entire time, just waiting on my club 3D and my new hdmi cable to test. Make sure you're using the display port adapter as well as a certified...

Also I've read in some thread (I believe it was the one first announcing that the RX 460 had native support) that the XFX cards use a modified Vbios that has problems with OS X and the "native" support. You can try using clover to load the vbios of a Gigabyte or EVGA(?) RX 460.

I've got an adapter but I don't believe that it's 1.2 and 2.0, no matter how many replugs or switching of ports I get black.

Same here, almost. F02 allows me to boot using the 1050ti, without igfx enabled as main output(this is progress!). I haven't checked to see if the sound issue persists (when the gtx is working, my sound doesn't play but pulling the hdmi cable allows sound to start working) but I can't achieve a...

Care to share your system info, boot args, and the steps you followed? I've tried just about everything I can think of, I really hope it's as simple as booting verbose!

I also have the same issue everybody here has. I've tried just about everything you could think of, reinstalled drivers with card in nv_disable, mac clock pixel patcher, manually reinstalling the files that were patched by mac clock pixel, injecting tv edid, I even created a custom ssdt to make...

So just got the gigabyte model and I'm having the exact same issue with the black screen boot... Not exactly sure how to proceed from here. I believe I did the mac-clock-pixel-patch before so I'm going to see if anything got left behind from it that might cause me issues EDIT Haven't tried...

I've cleaned up my config, tried various SMBIOS's, tried the blackscreen fixes, updated my bios(which fixed my power management issues, but sadly not my graphical ones), and I still haven't seemed to get this card working properly. I'm going to try returning the card and getting something...

Honestly, I don't know.. 3200 mhz was because OS X only recognizes my cpu as 3ghz. Removing has no positive changes, Intel Power Gadget isn't dropping below 3gh/z at all, instead of only using 4-12 watts it's now up around 25 edit correction, wattage is fluctuating a lot with use. went down...

here you are. bit of a mess, i used clover config to generate a new one and then re-added all my needed edits. Edit So some weird things... with clover set to nvidiaweb false and inject intel on booting with igfx, OS X recognizes the card fully, and if I plug in (still connected to igfx) a...

I'm using HDMI, also tried my display port to hdmi adapter. Don't have a vga(maybe dvi?) port on my tv.

Hey slimjim, just got my pcie connector for my MSI 1050ti 4gb and I've been trying to get it working. I seem to affected by the black screen issue, about halfway though the loading bar my screen goes black and I get no signal. Using iMac 14,3 inject intel/nvidia are both false. Bios is set for...

Sorry, files attached. Removed Clover fixes, enabled SSDT-5 per your instruction. AppleLPC is loaded. AppleIntelInfo bash-3.2# cat /tmp/AppleIntelInfo.dat AppleIntelInfo.kext v1.4 Copyright © 2012-2015 Pike R. Alpha. All rights reserved Settings: ------------------------------------...

Thank you very much. Just so I am clear as to directions I open my SSDT with MaciASL, then open the patch from your github AMI-Enable_LPC-9series and press apply? EDIT by doing what I asked about above I was unable to get AppleLPC loaded. Probably am supposed to inject the patch into a DSDT...

Ive generated an SSDT, I've got x86PlatformPlugin running and some Power Management working but for some reason the states I have start at 8, and then immediately jump to 27 or 23? How do I get lower states to work, my computer pretty much runs at a constant 3ghz, sometimes dropping to a 2.7 or...

Any chance you'll include how to get proper SSDT functions for this system? I remember it was part of the Mavericks (maybe yosemite?) guide, but I haven't seen it from you in anything newer.

1.) The CPU is running at 3 gh/z at all times, sometimes drops down to 2.7 but immediately spikes up again. 2.) 10.12.4 / H97N-WIFI / BIOS F2 / i5 4430 3.2 GH/z / HD4600 3.) This guide 5.) Not sure what exactly to run in terminal? 6.) Didn't see a save copy as button in console (10.12.4) so...

It should be supported, running as an iMac 14,3. I believe that's new enough right? iMac 2012 and up is supported, and 14,3 is late 2013 EDIT I'm thinking it's because of 1 I'm not running 4K currently(waiting for a cable) and also it only lists two LG monitors as supported on their website...