Contribute
Register

Search results

Loading Google Results...
  1. fluxharmonic

    High Sierra install freezing at 90%

    Just to be clear, my system is not rebooting on its own. I have to do it myself.
  2. fluxharmonic

    High Sierra install freezing at 90%

    Hi all, I’ve been trying to install High Sierra and am getting stuck. The first couple of times, I tried a straight upgrade from Sierra. The system would boot into the apple logo with the progress bar. And then it would stop making any progress around the 90% mark and stay this way for...well...
  3. fluxharmonic

    [Solved] EmuVariableUefi is killing my build

    Thanks for all your help. Onto the next problem....no sound.
  4. fluxharmonic

    [Solved] EmuVariableUefi is killing my build

    Thanks for all your help. Now onto the no sound problem...
  5. fluxharmonic

    [Solved] EmuVariableUefi is killing my build

    Oh my god you are not going to believe this... The graphics card has 3 hdmi ports. Change the ports from all the way to the right to all the way to the left worked. I feel like such a friggin dork.
  6. fluxharmonic

    [Solved] EmuVariableUefi is killing my build

    Good lord, I have no idea how to do that.
  7. fluxharmonic

    [Solved] EmuVariableUefi is killing my build

    HDMI. I used the kextbeast tool to install those - perhaps I don't have them properly installed?
  8. fluxharmonic

    [Solved] EmuVariableUefi is killing my build

    Hi all, I'm about ready to throw my machine out a window. I can't for the life of me get my GPU to work properly. I'm having the same issue a lot of people seem to be, but none of the solutions are producing any result. I've followed this guide to the best of my ability: The big issue seems...
  9. fluxharmonic

    New Build - Graphics not enabling in Sierra 12.6

    Changed back to 14,2 - no effect. I also tried re-running multibeast, using Clover v2.4k r4063 UEFI Boot Mode + Emulated NVRAM. The attached EFI folder is from this last configuration, and I'm still getting the same graphics crash during macOS startup.
  10. fluxharmonic

    New Build - Graphics not enabling in Sierra 12.6

    I'll change it back to 14,2 in a bit, but if I recall I was getting the same issue when I had it configured that way.
  11. fluxharmonic

    New Build - Graphics not enabling in Sierra 12.6

    The EFI partition.
  12. fluxharmonic

    New Build - Graphics not enabling in Sierra 12.6

    It's from my SSD, which is my main system drive.
  13. fluxharmonic

    New Build - Graphics not enabling in Sierra 12.6

    Ugh this is so confusing. I could have sworn that was unchecked. Ok so I turned that off and re-enabled EmuVariableUefi, and same result: graphics is turning off mid OS boot. New EFI is attached.
  14. fluxharmonic

    New Build - Graphics not enabling in Sierra 12.6

    Shoot I think I goofed the first time. When I ejected the EFI just now, it wanted to eject my recovery USB so I think it was the EFI attached to that drive. This one should be good. Seriously sorry if I wasted your time.
  15. fluxharmonic

    New Build - Graphics not enabling in Sierra 12.6

    Yup just tried it again, and same result. When the progress bar gets just over half way, the monitor loses its signal and turns off. Is it possible this is a result of fault installation of the hardware?
  16. fluxharmonic

    New Build - Graphics not enabling in Sierra 12.6

    Gimme a minute - I'll try this again with today's Clover update.
  17. fluxharmonic

    New Build - Graphics not enabling in Sierra 12.6

    Use digital connection: I'm using HDMI Boot with nv_disable=1: check Clover: Check - I'm using the most updated version Install web drivers: Check - Using the most updated version Don't inject intel of Nvidia graphics: Check Nvidiaweb via config.plist: check Emulate native NVRAM: when I do this...
  18. fluxharmonic

    NVIDIA Releases Alternate Graphics Drivers for macOS Sierra 10.12.6 (378.05.05.25)

    I have a brand new build as of yesterday, and my system isn't recognizing my card at all. It's still showing "Unknown 7 mb". I detailed the problem here: https://www.tonymacx86.com/threads/new-build-graphics-not-enabling-in-sierra-12-6.227800/. Any thoughts?
Top