Contribute
Register

Search results

Loading Google Results...
  1. sjpapa2

    Skylake Success: GA-B150M-DS3H El Capitan Server

    Don't know, runs as server.. All the time
  2. sjpapa2

    No Audio Devices - Realtek ALC AppleHDA [Guide]

    Hello guys, Happy Holidays, ..reading through the post I am a bit confused on what to do: GA-B150M-DS3H is my board, has RealTek LAN on board, and could not make onboard graphics go out of the darkness after second reboot (Installed Radeon: ->OK). Now about sound: Board specs say ALC887, tried...
  3. sjpapa2

    Gigabyte ga-b150m-d3h & Intel i5 6500 skylake hackable?

    Success on GA-B150M-DS3H.Cannot make the onboard VGA work, : used and AMD RADEON out of the box... Have 2TB Toshiba real disk. working on sound... ALC887 kext found does not work rest is fine!
  4. sjpapa2

    Skylake Success: GA-B150M-DS3H El Capitan Server

    UEFI boot for Unibeast El Capitan. Onboard graphics did not work after reboot: screen dark after Apple logo, [at first boot & install beautiful colours, at second boot goes dark], -> installed AMD Radeon PCie : OK LAN needs Realtek driver for this board! Sound not working.. digging..
  5. sjpapa2

    [SKYLAKE GUIDE] El Capitan 10.11.4, GA B150M D3H, i5 6500, GTX960

    The onboard GPU (Intel?) does it work? After I run Multibeast, screen remains dark. any hints? How should I configure Clover ? Installed a AMD Radeon HD 6xxx card: IT works! However, no LAN, no network card.... Installed InteliMouse.. kext: no avail.. anybody any ideas? How make LAN work?
  6. sjpapa2

    [SKYLAKE GUIDE] El Capitan 10.11.4, GA B150M D3H, i5 6500, GTX960

    GA-B150M-DS3H, followed Multibeast setup, Clover... but display stays dark after SATA reboot..
  7. sjpapa2

    10.11.4+ Skylake Starter Guide

    B150M-DS3H Success: Booted from USB -> Installed El Capitan -> trying to use Multibeast... .. cannot make display work .. retrying Multibeast (-x) : log says: msdodfs.kext failed to load operation not allowed.. .. cant mount ESP partition disk1s1 How do I patch your patches? Text edit?
  8. sjpapa2

    10.11.0-10.11.3 Skylake Starter Guide

    Hallo, Happy Holidays to all! I have a GA-B150M-DS3H mobo, but alas, cannot boot from HDD. Installed on HDD after booting from USB, but cannot boot from HDD to run Multibeast ..Monitor stays dark.... Running Multibeast after OS install before reboot is the only occasion,... then after reboot...
  9. sjpapa2

    [SKYLAKE GUIDE] El Capitan 10.11.4, GA B150M D3H, i5 6500, GTX960

    Any other smaller graphic card that works? I trust the onboard VGA does not work?
  10. sjpapa2

    [ISSUE] MISSING Bluetooth Controller Transport

    Did you get DSMOS arrived? or so? I had the same issue as FakeSMC.kext did not load....
  11. sjpapa2

    Cannot boot from HDD, GA-EP43-UDL BLUETOOTH controller

    Hello Started to config in legacy mode uniBeast El Capitan, Multibeast on USB: cannot use yet. But cannot boot from HDD, stuck at: "Missing Bluetooth controller transport" appears because, as one can see in image, DSMOS did not load. This is because FakeSMC.kext did not load. I added the...
  12. sjpapa2

    [ISSUE] MISSING Bluetooth Controller Transport

    Same here, cannot boot from HDD, on GA-EP43UDL, using El Capitan with UniBeast Legacy.... What shall I provide for help?
  13. sjpapa2

    [SKYLAKE GUIDE] El Capitan 10.11.4, GA B150M D3H, i5 6500, GTX960

    Cannot go passed apple icon and frozen progress bar... GA-150M-DS3H...
  14. sjpapa2

    Cannot go passed Apple on: El Capitan 10.11.4, GA B150M D3H

    Hello, Following this guide, but after booting with the Unibeast USB, the apple appears, a progress bar later on, and freeze! Starting in verbose mode, stop at: AppleUSBLegacyRoot@: AppleUSBLegacyRoot::init: ebabling legacy matching although USB set to legacy disabled.
  15. sjpapa2

    [SKYLAKE GUIDE] El Capitan 10.11.4, GA B150M D3H, i5 6500, GTX960

    Somehow tried to follow this guide, started with Unibeast ElCapitan, boots but cannot go passed The Apple icon! Apple appears, shortly after a white progress bar: that stays there! Kein Mucks. Any hints?
  16. sjpapa2

    USB fails to create, ->10.11.4+ Skylake Starter Guide

    After repairing msdosfs.kext: finally progress
  17. sjpapa2

    USB fails to create, ->10.11.4+ Skylake Starter Guide

    I hve never done this. I have the Yosemite package. Clicking install starts the familiar installation. Can this be done from the OS disk? Never came across to a 'refresh'. What is 'SS X installer'? Many thanks for the very useful hints!
  18. sjpapa2

    USB fails to create, ->10.11.4+ Skylake Starter Guide

    How can I restore msdosfs.kext? Never intended patching... Where can I get the original? and how install in MacBook?
  19. sjpapa2

    USB fails to create, ->10.11.4+ Skylake Starter Guide

    Not to my knowledge! no patch installed. What do you mean 'not booting'? How can I boot a MacBook Pro with 'kext-dev-mode=1"?
Top