- High Sierra 8700K Hackintosh
- Dual boot Win 10 High Sierra (separate boot SSDs)
- UniBeast USB recognized in BIOS but when selected for boot override, does not boot from USB to Clover; instead bypasses and boots to Win 10.
Working to install High Sierra on a spare...
Have a relatively stable High Sierra system running. Everything working except sleep, but haven't tried to tackle that issue yet.
Been getting random reboots, can't seem to replicate the problem. Totally unpredictable.
8700K OC @ 5.0GHZ 1.28v (all cores)
ASUS Z370-E Gaming...
I've been running a solid rig for a while - dual booting Windows 8.1 Pro and Yosemite, but I'd like to try a mild CPU overclock.
I've got a 4770K in a z87mx-d3h cooled by Hyper 212 Evo. Default clock at 3.69GHz in Yosemite.
Idle temp: 27˚C - 34˚C
Load temp: 60˚C
Went to BIOS...
I have a 3TB Seagate Barracuda HDD from the recommended section of Tonymac's build guides.
I plugged in the drive, Mavericks saw it right away, and I formatted it to ExFat, because I intended it to be a shared mass storage drive between Mavericks and Windows 8.1 on my system...
New discovery - when there's no flash drive is plugged in, the computer will successfully go to sleep, but not wake up.
When USB drive is plugged in, the computer does the sleep and instant wake thing.
Sorry for reviving this thread, but I'm having one more small issue.
The computer is running and working exactly as expected, thanks to all of the help everyone here on Tonymac. Unfortunately, the only thing not working is the sleep function in Mavericks 10.9.3.
When I sleep the...
I recently attempted to use the "Flavours" app on my 10.9.3 Hackintosh. I applied a theme to my system, the computer froze, and I had to do a hard restart.
Has anyone had any experiences with this app in the past?
I've got a Hackintosh up and running with Mavericks 10.9.3 on an SSD partitioned with Windows 8.1 Pro on the same drive.
Both OS's run fine - it's just getting to them that's the tricky part.
I'm currently running Chimera 3.0.1, which shows up when I boot my computer and displays...
I know there have been a few threads on Tonymac about iStat and GPU temps, but I couldn't quite find the answer I was looking for.
Running Mavericks Hackintosh 10.9.3, everything working, and have iStat Menus displaying all temps expect for GPU (GTX 770)
I've installed all FakeSMC...
I'm running an Intel 4770K @3.5GHz with Arctic Silver 5 and the stock cooler. Idle BIOS temps range from 55˚C to 60˚C.
I ran Prime95 for about 10 minutes, and temperatures spiked up to 100˚C. I was concerned, so I shut down the system.
Are these temperatures normal? They seem high...
I finally ordered a new motherboard and installed a copy of Windows 8 to do some stress tests on the build as you'd suggested. Everything running smoothly so far. Fingers crossed
I'm running a 4770K @3.5GHz with some Arctic Silver 5 and the stock Intel cooler.
I ran Prime95 for...
My current board, the GA-Z87MX-D3H, has been causing me a lot of trouble, and I'm looking for an alternative. From what I've seen, the Gryphon is a good choice for a powerful mATX build, and it doesn't need a flashed BIOS / custom DDST.
What I'm wondering is if it is indeed a good...
Since I already replaced the PSU and it only solved the problem for about 10 minutes, it must be the motherboard. I've exhausted all other possibilities, except the CPU.
Is there a way to check the CPU specifically, other than putting it in a known working system?