Search results

Loading Google Results...
  1. malki

    [SUCCESS] i7-5820k / GTX 970 / GA-X99-UD4 High Sierra 10.13 [Clover Guide] (100% Working)

    I recently upgraded to a 9900k but unfortunately it didn't work for me. I am back on my i7 5820k and my x99 motherboard. For what I do it works fine. I need it to be stable for video editing and all my effects need to work. That was not the case with the 9900k. Although it worked, some of my...
  2. malki

    [SUCCESS] i7-5820k / GTX 970 / GA-X99-UD4 High Sierra 10.13 [Clover Guide] (100% Working)

    I am not sure how to get dual cards working. Did you try to use the SLI connector? I heard a 2nd card makes little to no difference in premiere which is why I don't use it, not sure about resolve (resolve never works good on my system). I did some searching on tonymac it looks like dual cards...
  3. malki

    [SUCCESS] i7-5820k / GTX 970 / GA-X99-UD4 High Sierra 10.13 [Clover Guide] (100% Working)

    thats because geekbench 5 uses different numbers that is how it is supposed to look. your system is working correctly. not sure why they did that but mine does the same ill post my scores soon
  4. malki

    Enable Intel graphics + 1080ti to work same time on 9900k? + how to get usb 3.0 support?

    I now have usb 3.0. I have copied another users efi folder. Still not seeing cpu detected in about this mac (although could be cosmetic) and not sure about igpu working.
  5. malki

    Enable Intel graphics + 1080ti to work same time on 9900k? + how to get usb 3.0 support?

    Hello all. I have recently upgraded my system to a 9900k & z390 Aorus Ultra. I have successfully installed it, enabled nvidia web drivers, have sound & internet. Now i am trying to figure out a few things. First, how do I get it to recognize the intel graphics while i use my 1080ti for the main...
  6. malki

    [SUCCESS] i7-5820k / GTX 970 / GA-X99-UD4 High Sierra 10.13 [Clover Guide] (100% Working)

    thanks. I don't have a thunderbolt card in here, that is someone else. I was never able to find one for this board they were sold out and now they aren't in production
  7. malki

    [SUCCESS] i7-5820k / GTX 970 / GA-X99-UD4 High Sierra 10.13 [Clover Guide] (100% Working)

    It shouldn't be a problem to just swap out the graphics card. I think I'd probably start with that, that way if it doesn't boot you can just put your nvidia card back in. I believe AMD gpu's most of them are natively supported so it should be plug and play. Just stick to the buyers guide on...
  8. malki

    [SUCCESS] i7-5820k / GTX 970 / GA-X99-UD4 High Sierra 10.13 [Clover Guide] (100% Working)

    no fast boot, just regular startup. but yes, Windows 10
  9. malki

    [SUCCESS] i7-5820k / GTX 970 / GA-X99-UD4 High Sierra 10.13 [Clover Guide] (100% Working)

    Ok great. Please test it. I know we both have different revisions for the motherboard, looks like i have 1.0 and you have the updated 1.1 revision. This might make a difference, or not. I don't want to use the front audio port for my speakers. The way I have my computer connected it looks much...
  10. malki

    [SUCCESS] i7-5820k / GTX 970 / GA-X99-UD4 High Sierra 10.13 [Clover Guide] (100% Working)

    It's most likely to be unreliable when switching between operating systems. Try running windows for a time, then running mac, then running windows then mac again. It usually stops loading after that. Give it a week of normal use - a month, it should go out before a month is up. Whether its in...
  11. malki

    [SUCCESS] i7-5820k / GTX 970 / GA-X99-UD4 High Sierra 10.13 [Clover Guide] (100% Working)

    Right. Already covered this in the guide. Audio is unreliable on this board unless using a usb audio adapter or spidf out. Step 10 - Enabling Onboard Audio This used to be a guide for installing VoodooHDA.Kext. You can now install it via Multibeast, so make sure you do! (already part of step 8)...
  12. malki

    [SUCCESS] i7-5820k / GTX 970 / GA-X99-UD4 High Sierra 10.13 [Clover Guide] (100% Working)

    glad its working! Not sure about thunderbolt just do some searching. Good luck!
  13. malki

    [SUCCESS] i7-5820k / GTX 970 / GA-X99-UD4 High Sierra 10.13 [Clover Guide] (100% Working)

    Yes i think high sierra runs smoother than El Capitan but should be similar performance. I never could get the computer to run quite right on El Capitan, but since sierra / high sierra it's been great. I am on 10.13.6 its perfect
  14. malki

    [SUCCESS] i7-5820k / GTX 970 / GA-X99-UD4 High Sierra 10.13 [Clover Guide] (100% Working)

    Your Right! if I type it by the # it will work. Unfortunately the overclock was not stable I have realized. It ran fine for a while, but eventually crashed when exporting longer videos. This was with the ram overclocked and without the ram overclocked. So I have went back to the Auto overclock...
  15. malki

    [SUCCESS] i7-5820k / GTX 970 / GA-X99-UD4 High Sierra 10.13 [Clover Guide] (100% Working)

    Thank You! My computer is performing great. I knew I could get some extra performance out of it. I have a really nice CPU Cooler from Corsair they sent me when my last one failed, so I figured I could push the oc further. Unfortunately I can't change any manual overclock settings like voltage...
  16. malki

    [SUCCESS] i7-5820k / GTX 970 / GA-X99-UD4 High Sierra 10.13 [Clover Guide] (100% Working)

    Hey bro I was able to overclock the ram to 3000mhz using the 4.5ghz setting you gave me! It worked for me for some reason. I am on latest bios f24c. Running great! Never scored this high on geekbench. Wow
  17. malki

    [SUCCESS] i7-5820k / GTX 970 / GA-X99-UD4 High Sierra 10.13 [Clover Guide] (100% Working)

    OMG! It worked! I could not change any bios settings like in the video. But I did load your OC Preset. At first when I booted it would not move the mouse. But would load windows. Then I saw you had it set to Windows 8 / 10 in the bios. I screenshotted all my previous bios settings and copied...
  18. malki

    [SUCCESS] i7-5820k / GTX 970 / GA-X99-UD4 High Sierra 10.13 [Clover Guide] (100% Working)

    I wish I could do that. I can't change any manual settings. Check this video. I will try to just load your OC Settings from the USB lol. I wonder if that will work
Top