Search results

Loading Google Results...
  1. osufella

    macOS 10.14.3 Supplemental Update

    Updated with 2 reboots, about 10 minutes later, all finished and up and working.
  2. osufella

    Motherboard for an Easy Build Hackintosh This should be a great place to start in your journey...
  3. osufella

    Motherboard for an Easy Build Hackintosh

    Just one layman's .02...there's much that goes into that question. If you try a search on the site for the motherboard you will find a whole slew of posts about that motherboard. But you need to consider what you are using it with and for. Dedicated Graphics vs integrated graphics. Are you...
  4. osufella

    [GUIDE] Installing 3rd Party Kexts - El Capitan, Sierra, High Sierra, Mojave +

    @jaymonkey How about an additional section on updating Kexts. With the latest system update, it was recommended we update 3 or 4 kexts. Is that simply deleting from the finder then installing new based on kextbeast and kextutility? Is there another "preferred" method? One last question, if...
  5. osufella

    Can't connect to iCloud message

    Have you followed this guide?
  6. osufella

    [Success] osufella's Quiet Fractal Build: Core i3-8350K - GA-H370M-D3H - 16GB RAM – Rx 570

    @vlad1966 Your profile doesn't match H370M-D3H. I'm assuming you are working on another build. Attaching my config list, and screenshots of my EFI and /L/E folders.
  7. osufella

    macOS 10.14.3 Update

    Updated to latest clover build via clover configurator. Updated kexts. Updated via System Preferences. Rebooted 2x. 17 minutes later, up and working.
  8. osufella

    How does this hardware look for a new build

    Bluetooth/Wifi card - I've had great success. If you have a spare slot.
  9. osufella

    [Success] osufella's Quiet Fractal Build: Core i3-8350K - GA-H370M-D3H - 16GB RAM – Rx 570

    @goldorac I removed some entries in the SMBIOS. Also, I'm attaching a screenshot of my /L/E/ folder. For me to get USB working, review my SSDT-UIAC.aml entry in CLOVER/ACPI/patched folder + USBInjectAll and XHCI-unsupported kexts in /L/E/. Those were the only 3 things I did to get USB...
  10. osufella

    [SUCCESS] Asus H370-I ITX, 8600k, RX560, 970 EVO Mojave Journey Check Network forum
  11. osufella

    Apart from no overclocking, is there any disadvantage/problems with using a H370 motherboard?

    Just one person's input, but I've had great success with GA-H370M D3H motherboard. Knowing that user experience is tied to all of the components chosen, the components I chose allowed me to, what I would say, implement fairly easily. There was a comment about hackintosh and learning and I...
  12. osufella

    GA H370M-D3H - Sleep causes CPU fan to turn off

    Going to have to watch this but the BIOS has reset itself, this is the second time in a month. In doing so, the CPU fan would not spin up and stay on, after a sleep/wake scenario. Went into the BIOS and selected CPU Fan to PWM from Auto and the CPU fan now spins up and stays on after sleep/wake.
  13. osufella

    Newbie- Having Trouble Installing Mojave

    I am definitely not the most technical, but when I search the forum for XFX Radeon RX-560, the I see multiple instances referencing a custom VBIOS for XFX.
  14. osufella

    Newbie- Having Trouble Installing Mojave

    Also, jaymonkey in his framebuffer posts does not recommend 18,1 as I think it doesn't use dGPU and IGPU. I booted my USB installer from 14,2 and then ultimately used 18,3.
  15. osufella

    Newbie- Having Trouble Installing Mojave

    I'm attaching my EFI folder from my install USB. Reason I mentioned to review my build was I started with very basic install, then moved into other areas to address fixes. I had no issues plugging the USB into either the Top USB ports on the back panel or the USB ports connected to the...
  16. osufella

    Newbie- Having Trouble Installing Mojave

    I have the same motherboard, but different CPU. You might check out my build. It was pretty straightforward. click here
  17. osufella

    [Release] Hackintool v2.0.4

    I ended up using your ssdt guide with great success. My results are here. I have one question about that process, I left USBInjectAll and XHCI-unsupported kexts in S/L/E after creating the aml. Is that correct?
  18. osufella

    [Guide] Creating a Custom SSDT for USBInjectAll.kext

    To start from step 1 to finish and deployed aml, about 3 hours. I had never tried it before and so there was some trial and error to get the sequencing correct. But once you have working files, it was relatively easy to update. Actually "compiling" the aml is near real time <-- not sure if...
  19. osufella

    An iDiot's Guide To Lilu and its Plug-ins

    Both are working. I followed this guide and its worked multiple times. In fact, I did 2 changes yesterday, 14,2 to 8,1 and then 8,1 to 18,3 with no problems. For me the important part was to login into icloud and delete the old versions (that worked), prior to starting (per the instructions)...
  20. osufella

    An iDiot's Guide To Lilu and its Plug-ins

    Updated and everything looks like it should be. Thanks for the help.