Search results

Loading Google Results...
  1. Thinkcat

    AppleHDA Realtek Audio [Guide]

    I think I have everything else figured out, but what is this? USER: set Audio ID (decimal layout-id) Then I look for more instructions, and there is this: HDEF/Clover/config.plist/Devices/Audio/Inject/Audio_ID But what does this mean? How can I know what the result should look like? These...
  2. Thinkcat

    [SOLVED] Intel HD Graphics P4000 ( HD4000 )

    Hello. I was also trying to make HD Graphics P4000 of an E3-1245v2 work. On an Asus P8C WS and running El Capitan and Clover r4522. Now I succeeded by putting the correct FakeID into Clover config.plist and putting the FakePCIID.kext and FakePCIID_Intel_HD_Graphics.kext into...
  3. Thinkcat

    Hardware video decode

    Hello. I'm trying to run my Xeon E3-1245 v2 (Ivy Bridge) with P4000 graphics without my former Nvidia GT 640. I have a freshly installed Clover r4522 with default config.plist and some changes there. I have FakePCIID.kext and FakePCIID_Intel_HD_Graphics.kext in Clover's 10.11 kext folder...
  4. Thinkcat

    [Solved] Security Update 2017-003 El Capitan

    I assume you know how to access terminal and make yourself root in linux (or use sudo). You need to do cat /proc/partitions to see all your partitions. See there a partition of maybe 200 MB in size. Now you need to have an empty directory to do the mount. Then, as root, you type maybe sudo mount...
  5. Thinkcat

    Apex MI-008 case and triple display

    As far as I know, here are rules against that, and also a good reason is given for that. All questions in those threads were already answered in this thread.
  6. Thinkcat

    GPU MSI - GT 710 1GD3H LPV1

    The defining feature is the chip. GT 710 will work, but need Nvidia web drivers. Otherwise it's only one display, unaccelerated.
  7. Thinkcat

    MSI GeForce GT 710 (1GD3H LP)

    It will work. But only with Nvidia web drivers. And only two digital displays. That is the exact same card I had earlier, before going for an Evga.
  8. Thinkcat

    [Solved] Security Update 2017-003 El Capitan

    How easy would it be to access the kernel source code, and quickly see what has been done there? That could maybe give hints and pointers to how difficult this will be to resolve. I am starting my install of Sierra into my GA-H170N in a minute.
  9. Thinkcat


    Just a minor detail. Could someone edit the topic to be more descriptive? Or does it matter anymore, since the solution was found?
  10. Thinkcat

    Changing wifi country code in clover patch?

    For some reason, the thing hates FI as a country code. Can anyone deny or verify this? Symptoms seen are that in System Information there are listed all the supported channels. But once I attempt to connect, with FI set as a country code, I get the dialog about being unable to connect (and that...
  11. Thinkcat

    [Guide] El Capitan on the Skylake H170N-WIFI

    Hello. I have El Capitan running on GA-H170N-WIFI. I bought the Broadcom Wifi solution recommended in the guide. My problem is that I can't get 5 GHz to work. I have used 2.4 GHz for a long time with no problems. But once I attempt to connect to 5 GHz, the supported channels line in System...
  12. Thinkcat

    No update available for El Capitan

    It sounds like a plunge to me. I haven't done the security update yet, so the control panel shows no updates. Once I do the security update, I must hope that the control panel will show that something is available. To avoid any surprises at this point, I've always liked to download the driver...
  13. Thinkcat

    No update available for El Capitan

    Any chance to get a link to a driver? At least does not have one yet.
  14. Thinkcat

    Apex MI-008 case and triple display

    An update. Been running a triple display setup for a while now. A 20" 1600 x 1200, a 24" 1920 x 1200 (my main display) and 22" 1680 x 1050 (the BIOS boot screen). All are connected digitally. The maximum supported would be three 2560 x 1440 displays of any size at 60 Hz. Every time I install a...
  15. Thinkcat

    Apex MI-008 case and triple display

    Got the EVGA GT 710. Can't hear the fan, so I have postponed any tinkering with the heatsink. I now have one unused MSI GT 710. Saw that if three displays are connected, and the one at the DVI-I is analog, it will be the BIOS startup screen, but only the two digitally connected screens will...
  16. Thinkcat

    Apex MI-008 case and triple display

    They confirmed to me that triple monitor should work with the GT 710, so I ordered that. This current MSI GT 710 has been powerful enough for my needs. I wish to find out if I can remove the heatsink and put a bigger passive one in its place. But for this I'd need someone to open his Apex case...
  17. Thinkcat

    Is Apex MI-008 Power Supply Enough Power?

    Hello Since lots of things discussed here touch upon my current plans, I decided to chime in and give a point of view. I have an MI-008 equivalent case and a Skylake i3 in it. I have the 450 W Corsair power supply, because the case's power supply was unpleasantly noisy. I think that is the...
  18. Thinkcat

    Apex MI-008 case and triple display

    Hello I have a Skylake i3 machine built into a case that is about the size of Apex MI-008 (the Thermaltake version of the same chassis). Thermaltake - Global - Element Qi (US) - VL520B1N2U This means a single slot graphics card must do. I originally went with a passively cooled 1 GB MSI. GT...
  19. Thinkcat

    Xeon based Hackintosh

    Has anyone ever got a trashcan Mac Pro clone working? I mean, are there Ivy E Xeon builds anywhere? I know there are working Tylersburg builds, but those are too old to be worth the trouble. I have an Ivy E3 Xeon that works nicely. Except that sleep and shutdown don't work, but otherwise it's...
  20. Thinkcat

    A Haswell build with not so recent graphics card

    How are the fan controls in the Z version? The H has three modes (silent, normal, full) and one custom mode that only allows to control the slope of the signal from a fixed set of choices. The formula is like PWM_PERCENTAGE = CURRENT_TEMP * x, where x you can select between 1.25 and 2.5 in steps...