Hello. I need to get an expansion card for USB 3.0 that has a 20 pin connector.
My case has 4 USB's in the front with 2 20 pin cables (blue tip) to connect to the mobo but my mobo only has one 20 pin slot and one USB 3.1 front panel connector. I bought an expansion card but it didn't work with...
My case has 4 USB 3.0 ports in the front that have 2 20 pin connectors to plug into the mobo. My mobo however only has 1 20pin slot for usb 3.0
I bought the following expansion card but the OS is not detecting it (10.12.6)
Hello I finally managed to get on-board Graphics working with following:
ACPI : patches : Rename HDAS to HDEF and Change GFX0 to IGPU.
Boot : flag : -shikigva=1, -disablegfxfirmware
Graphics : Inject Intel checked and ig-platform id :0x59120000
Device: IntelGFX: 0X59128086
SMBIOS : iMac 18.3...
Sorry, I am new to this and this is my first hackintosh.
I installed 10.12.6 with UniBeast and after installing kext for onboard graphics now I can not boot anything. Not even from USB. I keep getting the AppleACPICPU error. I finished installing some kext using multiBeast.
I am attaching the...
I am building my first Hackintosh and it has been years since I've built a PC so I might be a bit behind. I am building a PowerMac g5 and I am almost done with the case. It is time to put everything together.
I have 2 128gb SSD lying around. Wanted to use them for OS and wanted to buy 2...
I had to change things up a bit so making a new thread (Previous one was about the PSU mod and after some input and research I think I'm going to put an ATX PSU inside G5 PSU case rather than reuse G5 PSU)
So, going to put an i7-7700K (need advice on cooling. Want to go liquid but need to...
So I was given an old G5 and I really like the case. So wanted to build a Hackintosh on a budget:
No graphics card (Don't really do any gaming or heavy video/image editing) - only need to connect 2 to 3 monitors.
Some SSDs and DVD-RW (so the DVD caddy is functional)...