Search results

Loading Google Results...
  1. mitrovtsiy

    MSI Z490 Tomahawk + i7-10700k / Catalina 15.5.5 / OpenCore

    I can also recommend this guide on how to prepare a config.
  2. mitrovtsiy

    MSI Z490 Tomahawk + i7-10700k / Catalina 15.5.5 / OpenCore

    Hi, it looks like it stacks on airport. And I believe my setup stacks for a few seconds in a similar step. What wifi do you have?
  3. mitrovtsiy

    MSI Z490 Tomahawk + i7-10700k / Catalina 15.5.5 / OpenCore

    On what stage video from 5500xt disappears?
  4. mitrovtsiy

    MSI Z490 Tomahawk + i7-10700k / Catalina 15.5.5 / OpenCore

    Sound. I use layout-id 1 with AppleALC. For now, I moved voodoo hda. But there are soo many problems with it. Strange sound level, some glitches when playing youtube. But it works without going to sleep. I would like to move back to AppleALC. But it looks like something must be fixed in...
  5. mitrovtsiy

    MSI Z490 Tomahawk + i7-10700k / Catalina 15.5.5 / OpenCore

    I want to be able to use Clover over OpenCore with the new 10th get. Maybe when some iMac with 10th gen appear, they will add it. But for now, there is no so much information about it. There is a nice OpenCore guide. I use it when started with OpenCore.
  6. mitrovtsiy

    MSI Z490 Tomahawk + i7-10700k / Catalina 15.5.5 / OpenCore

    I have a correct pciroot of my audio. As a device-id and layout-id.
  7. mitrovtsiy

    MSI Z490 Tomahawk + i7-10700k / Catalina 15.5.5 / OpenCore

    I have somewhere the EFI with working HDMI, but without acceleration. I will try to find it later and share it. Did mac see the network interface at least?
  8. mitrovtsiy

    MSI Z490 Tomahawk + i7-10700k / Catalina 15.5.5 / OpenCore

    Hi. I boot up a few times on HD Graphics with HDMI, but it works without full acceleration. So I just switched to DP for now. Yeap, I use the same kext (LucyRTL8125Ethernet.kext) for ethernet. You need to put it into Kexts folder and link it in config.plist (as I see it linked already in your...
  9. mitrovtsiy

    MSI Z490 Tomahawk + i7-10700k / Catalina 15.5.5 / OpenCore

    I use ALC1200 config. It shows all outputs, but there is no sound. But I figured out that sound appears after sleep mode. It's very strange, it looks like there is some problem with power or something. But thanks, I will try ALC892 today. Maybe it's the issue.
  10. mitrovtsiy

    MSI Z490 Tomahawk + i7-10700k / Catalina 15.5.5 / OpenCore

    Yes, I have a 2 nvme m2 drive. I run with xmp profile #1 (the second one is empty)
  11. mitrovtsiy

    MSI Z490 Tomahawk + i7-10700k / Catalina 15.5.5 / OpenCore

    Yeap, I mean just disable it. I can only recommend to go throw opencore 10gen intel docs. And check if there are some keys, which was not important for my system.
  12. mitrovtsiy

    MSI Z490 Tomahawk + i7-10700k / Catalina 15.5.5 / OpenCore

    At least my EFI does not have drivers or kext or maybe some config to load rx. So maybe it can be a problem. Try to load without rx. If it will process more than you will know that the problem with rx.
  13. mitrovtsiy

    MSI Z490 Tomahawk + i7-10700k / Catalina 15.5.5 / OpenCore

    Did u boot up with rx590 or with igpu?
  14. mitrovtsiy

    MSI Z490 Tomahawk + i7-10700k / Catalina 15.5.5 / OpenCore

    The same stuck with EFI what I send?
  15. mitrovtsiy

    MSI Z490 Tomahawk + i7-10700k / Catalina 15.5.5 / OpenCore

    With this key <key>SetupVirtualMap</key> <true/> My motherboard stuck in the same place, only with false bootup.
  16. mitrovtsiy

    MSI Z490 Tomahawk + i7-10700k / Catalina 15.5.5 / OpenCore

    Also, in this EFI put your serial number in config.
  17. mitrovtsiy

    MSI Z490 Tomahawk + i7-10700k / Catalina 15.5.5 / OpenCore

    AAPL: [EB|#LOG:EXITBS:START] - boot just stops on this line? Try this one. I use it as an entry point with opencore.
  18. mitrovtsiy

    MSI Z490 Tomahawk + i7-10700k / Catalina 15.5.5 / OpenCore

    I have MSI Z490 Gaming plus before Tomahawk, and it works with the same config. Maybe check default BIOS settings for macos. Like serial-port, vt-d, etc.
  19. mitrovtsiy

    MSI Z490 Tomahawk + i7-10700k / Catalina 15.5.5 / OpenCore

    Hi. It's very strange, but. I boot up with default BIOS settings. Did you try different USB? Maybe your motherboard has os security?
Top