Search results

Loading Google Results...
  1. salty dog

    Any Lynx PCI Card Success Stories?

    Has anyone had success with any of the PCI family of Lynx cards? From my research it would indicate that they should work as there isn't anything to suggest they won't. There is a common OSX driver for all of there PCI/PCIe cards, it's 64 bit and 10.9 compatible. I want to add another...
  2. salty dog

    Pro Tools 11 is now available to download

    The title says it all..... I'm downloading it right now, I'll be testing it on a real Mac before it goes on my Hack.
  3. salty dog

    How safe is to remove the Chipset Heat Sink

    I posted this elsewhere but didn't get any replies so I thought this might be a better place for it.... I have just ordered a Gigabyte GA-H55-UD3H motherboard to try out as the basis of a Pro Tools HD system. I opted for this bard as it has 4 PCI slots allowing me to use 4 Pro Tools HD PCI-X...
  4. salty dog

    Removing Chipset Heat-Sink... How safe?

    I have just ordered a Gigabyte GA-H55-UD3H motherboard to try out as the basis of a Pro Tools HD system. I opted for this bard as it has 4 PCI slots allowing me to use 4 Pro Tools HD PCI-X cards. I currently have a Pro Tools HD system based on a P55A-UD4 which is working great, but I'm limited...
  5. salty dog

    High End Case Suggestions

    Im looking for suggestions for a case for my new build. I'm looking for something sleek and understated, not a awful looking gamer type case with loads of LED's and fans. I need it to take an ATX motherboard, reasonable sized PSU, about 4 internal drives and be as silent as possible. I'm not...
  6. salty dog

    Guide: GA-Z77X-UP4 TH with i5 2500K

    I have finally ironed out most the issues I have been having with the GA-Z77X-UP4 TH and i5 2500K, apart from the Via VL800 USB ports not working. So I thought I'd share how I got there. Components Used: Motherboard - Gigabyte GA-Z77X-UP4 TH rev 1 UEFI F3 Processor - Intel i5 2500K GPU...
  7. salty dog

    Free Softube AAX plugin for PT10

    Free stuff is always good! I'm a BIG fan of Softube and their plugs, in fact anything Music Tech related to come out of Sweden is great (Elektron, Nord, Teenage Engineering, Propellerheads.....) If you haven't tried...
  8. salty dog

    GA-Z77X-UP4 TH Installation Problem.

    I'm the proud owner of a new GA-Z77X-UP4 TH and I'm stuck getting to the Mountain Lion installer screen. I've done about half-a-dozen hackintosh builds, and several dozen installations so I wouldn't call myself a noob. The system consists of the following: GA-Z77X-UP4 TH, i5 2500K, 1 x 4GB...
  9. salty dog

    Power Supply Advice

    I've started putting together parts for my next build which is going to be a HTPC. I want this build to be as small (and quiet) as possible, so the physical size of the PSU is important. The parts I have so far are.. CPU: i5 2500K (Overkill!) Motherboard: Zotac H67-ITX-C-E SSD: Kingston SSD...
  10. salty dog

    Avid/Euphonix Eucon Success

    Just a note to anyone that wants to know..... I added a Avid/Euphonix Artist Control and Artist Transport to my Hackintosh rig yesterday and it works perfectly using Eucon 2.6.2 software, Logic 9 and Pro Tools 10 on 10.6.8
  11. salty dog

    Lion and Pro Tools 10

    I have just done two fresh installs of Lion with Unibeast, updated to 10.7.2 installed all the kexts and drivers I require...... everything works great, until I install Pro Tools 10! After installing Pro Tools 10 and restarting my Lion install refuses to boot, Kernel Panics on restart. I have...
  12. salty dog

    Apple HD5770 and Dual Mini Dispalyport Monitors

    Just a post to report success on finally getting my two 27" iMac's working with my hack, and the solution couldn't have been simpler...... an Apple ATI HD5770 card. I'm currently basking in the glory of 2 x 27" monitors, all 7,375,800 pixels! Using Hoolock framebuffer. I haven't tried the...
  13. salty dog

    TC Electronic Powercore PCI working

    I just thought i would let anyone that is interested know that I now have a powercore PCI working in my build using the 4.0.5 drivers. There are stability issues with some of the plugin's but this is to be expected due to TC's terrible drivers Next I want to get my hands on a UAD card!
  14. salty dog

    Gigabyte GA-P55A-UD4 rev1 Build

    Hi All, First Up thanks to the masters for all their work on this great project. Using iboot and Multibeast has made getting a working hackintosh so much easier than the first time I did it back in '07. I have successfully got my 3rd hackintosh running with the following components...