Search results

Loading Google Results...
  1. eksirf

    G4 Cube - MT0.2-ST-NR-N

    A few days have passed. I received a new Mainboard (changed to Z77N-wifi). After installing Mavericks the sound is working (yeah!). Temperature are a better, too. Still hot after 20' stress test, 4 cores at 3,1GHz. Now also inside: 500GB 2,5" HDD. I had to "play around" a little bit in the UEFI...
  2. eksirf

    Mountain Lion: MultiBeast - No Audio/Solutions and Problem Reporting

    So the sound chip onboard ist damaged...that's...:thumbdown:
  3. eksirf

    Mountain Lion: MultiBeast - No Audio/Solutions and Problem Reporting

    :banghead: Sorry, should have checked this...
  4. eksirf

    Mountain Lion: MultiBeast - No Audio/Solutions and Problem Reporting

    Hi there, would be nice if someone could help me out a little bit. I want to use the onboard sound: GA-H77N-WIFI (rev. 1.0) concerning their homepage it should be a Realtek ALC892 codec, i7 3770T, Radeon HD 6670 I have installed a fresh OS X 10.5 using UniBeast 2.1.1 and MultiBeast 5.5.3...
  5. eksirf

    G4 Cube - MT0.2-ST-NR-N

    Again - thank you. After reading your post I "suddenly" see in the screens sleppek used an idle multiplikator of 16 instead of 25. I did this and also reduced the turbo wattage to 38 - which seems to result in a turbo multiplikator of 31. Temperature is better, but not quite good. I am going to...
  6. eksirf

    G4 Cube - MT0.2-ST-NR-N

    ersterhernd - I have, kind of, jacked up the sensor. It is working now - but not as good as I have expected. As far as I know the sensor is not installed upside down. Please notice one picture shows the top plate of the case turned around (274). As you can see on picture no. 273 the M3 side of...
  7. eksirf

    G4 Cube - MT0.2-ST-NR-N

    Thank you very much - for the compliment and the advice. But Sleppeks Cube is much more advanced. After trying to copy the Cube I really want to have a look closer at his build! I don't know how to add an additional drive...and I really want to. 120GB SSD is to small, bigger SSDs are to...
  8. eksirf

    G4 Cube - MT0.2-ST-NR-N

    Config and build is based on http://www.tonymacx86.com/golden-builds/96127-sleppeks-cube-2-1-build-core-i7-3770t-ga-z77n-wifi-16gb-ram-500gb-ssd-ati-6670-a.html#top SSD is an other one, PSU is located direct on the Motherboard - I am not sure if the PSU position is such a good idea - I have an...
  9. eksirf

    G4 Cube - MT0.2-ST-NR-N

    G4 Cube At first - thanks for the idea to update a cube. Thanks to all the people who posted all the information about their builds. My G4 Cube Build is kind of finished. Only a little bit of "polishing" is needed. One detail which needs a bit of polishing is the touch sensor MT0.2-ST-NR-N. I...
  10. eksirf

    sleppek's Cube 2.1 Build: Core i7-3770T - GA-Z77N-WIFI - 16GB RAM - 500GB SSD - ATI 6670

    Amazing Cube! Thank you for the inspiration. One Question - is there an other optical drive I can use? The BD-5850H is kind of expensive (nowadays? MF did charged 40 Euros in april?).
Top