So im dualbooting 10.14.6 / 10.15.2 using iMacPro1,1 smbios. Vega56. iGPU disabled
When i use Videoproc (3.5) on 10.14.6. everything works flawlessly.
On 10.15.2 Videoproc begins encoding and as soon as i press stop. The computer shuts down.
Anyone else seeing this type of behavior?
So i updated to 10.14.6 using VideoProc 3.3
Still not seeing the AMD notification light up when transcoding. iMacPro smbios with iGPU off.
Also tried with MacMini and iMac smbios with iGPU on. Not a whole lot of difference between them to be honest.
Hopefully newer VideoProc will fix this.
For the 1st time my system updated with 1 reboot like a champ. :headbang:
I see some folks with info in NVMExpress tab of system info. Mine shows up in Sata/Sataexpress.
Cosmetic or is something setup wrong???
I have edited my SSDT.
I added PRO1 to EH01.
Should all my hubs be labeled 255?
When saving out from DSL to AML, why does the "//"UsbConnector", 255" line disappear?
I attached my dsl, aml as well as ioreg if you have the time to take a look.
Thx for the help rehabman!
Hi rehabman, im attaching my ioreg to fix a sleep/wake issue with a GA-Z68M-D2H board and a BCM94360CS2 card in an adapter running via PCIe with a usb header for bluetooth.
Not sure what port the usb header is on or what to edit once i find the appropriate port?
As a matter of fact the new whatevergreen 1.2.0 is giving me a KP and instant reboot. I usually have no problems with this kext and RX 570. When i remove the kext from EFI folder computer boots normally.
*Scratch that... IntelGraphicsFixup, NvidiaGraphicsFixup, Shiki is now intergrated in...
Functionality not affected with the cut.
I put the BCM94360CS2 back into my z370 board once i saw wifi and bluetooth was fully operational on my old system.
Old system now has a BCM94352HMB AW-CE123H with a different PCI adapter functioning well.
Both systems are running 10.13.4
Just wanted to say that you were right about mounting the BCM94360CS2 with the NGFF adapter into a Fenvi NGFF PCI adapter. You will have to cut off a portion of the NGFF adapter but it does come with perforations. It worked perfectly for an older system i happen to have.
Well i ordered the BCM94360CS2 card and the NGFF M.2 adapter as was described in this thread.
Installed into Asrock z370 Mini itx and.............
I got wifi NO bluetooth.
Funny thing was, on 1st boot I had both wifi and bluetooth working. On second boot bluetooth was gone.
edit: After i...