I am struggling to achieve any success in enabling onboard audio for my newest build (10.13.5).
What I have done:
A dozen proposed solutions, to no avail. Deciding to start over, I...
deleted any/all k*-patches from the config
restored AppleHDA kext
installed the requisite 300...
It may be worth noting that the pre-install process fails at
IOReg/Search: CodecDevice (if CodecDevice present, proceed to 8. Realtek Codec)
Despite applying the Z370 patch (this was confusing initially… i.e.: 300 series VS k-lake z370)
Just now I have cleared CMOS with battery removal in an...
With just over 200 open issues his project appears to be abandoned.
In my own testing there are silly syntax errors that break the script. I suspect this is due to updates to the Intel product specification website. It is unreliable and should not be used. Since this thread is referenced in...
I would advise against that since you are using a different system profile. You are liable to get the Apple ID frozen or throttled which is no bueno. Just take some time to read this guide and generate the proper identification.
Sounds like you could possibly have put something in "Board Serial Number" you shouldn't have. Re-read the section in the thread about MLB (It is different from the serial number and you should have different values for serial and board serial AKA MLB)
The ROM & MLB sections are very long but...
Using this guide I was able to setup a fresh build (Old 2011 CustoMac Mini)
One point I had to work out on my own was the SN generation. Using generators really felt like a dead end and I was having to wait to look-up on Apple's website due to the brute force protection. Finally, I just gave up...
I used the guide here: download/file.php?id=33497&mode=view to no avail with my Gigabyte GA-H67N-USB3-B3 (F9) with the latest MultiBeast 4.6.1
I just want back port audio. I don't need HDMI sound.
It may also be worth noting that I was able to hear audio in a Windows installation.
Re: Stuck on Apple logo after Unibeast lion clean install
Lion install with Unibeast worked wonderfully with '-v GraphicsEnabler=NO'
I am only left with some audio issues (No sound at all) on H67N-USB3 F9