I installed 10.4 following this guide and everything works perfect. But when I try to upgrade to 10.4.3, it restart once during the upgrade and then I select upgrade on clover again. After the upgrade complete and restart, clover can’t find the Harddisk in the menu, only the...
Thank you so much for your help.
An apple Cinema Display was connected through DisplayPort with a miniDP to DP connector as the main. Another Samsung display was connected to the HDMI (60Hz) as the second monitor.
I use ASROCK Beebox S which has very similar configuration as NUC6. I know it's off-topic, but here is the best place to discuss it.
If I power on it with dp monitor and then hot-pluged hdmi, dual monitors work. But when it restart, hdmi monitor become black again. When I hot-plug again, mac os...
Conneted two monitors through dp and hdmi which works normal in windows. But in mac os, the dp one was recognised as main display and the hdmi one as extension display. Both setup looks normal, mirror available and the differneciation rate could be changed but the hdmi one always dark without...
Hi Rehabman, I have updated 10.13 smoothly following your guide. But when I shut down or restart the os, there will show a sharp green screen before it become black. I have checked the Lilu.kext and IntelGraphicsFixup.kext is the latest edition.
Another problem is as you mentioned, there is a...
After connect the third antenna, bluetooth works perfect now.
Also change UsbConnector value to 255 after it. Is it right now?
The only problem is the original internal IR receiver can't be recognized. Any possibility to make it working?
The Magic Trackpad is much easier to be connected than the magic keyboard. Sometimes the trackpad works very well, but sometimes the response lags a lot. It looks like something disturbs the connection.
Airdrop works now but the transfer speed not as fast as bcm94352. The Mac never found...
I installed 10.12.6 following Rehabman's Nuc6 guide on my Asrock Beebox s i3 6100 , which has an Internal Wifi/Bt module intel AC 3160. The Bluetooth works very well.
Now I replaced with the DW1830 and the wifi works without any kext/patch. Just shows the third party card.
The Bluetooth shows...
I have replaced the original intel wifi/bt card with dw1830 and do a fresh install. The wifi works immediately but shows 3rd party. When I do the post-install procedure, wifi shows normal as dw1560. The Bluetooth shows up but really hard to conncet my magic trackpad, sometimes...
Thanks for your great work.
I have successfully installed Sierra 10.12.5 on Asrock Beebox S i3 6100U following this guide.
It has almost same specification with intel NUC6i3
CPU: Intel Core i3-6100U (3M Cache, up to 2.30 GHz)
Memory: Supports DDR4 2133 MHz, 2 x SO-DIMM slots...
Very interested on ASROCK Beebox S i3 6100U, which has almost same specification with intel NUC6i3. The pros of it are changeable wifi/bt module, sata3 hdd and full-size hdmi dp output. And cheaper at the moment than the intel nuc.
But it's hardly to find any successful guides of it until now...
I am interested on this mini PC. Have you solved the problem of audio? And how many memory slots on the motherboard? I know there is one stick of 8GB. But the review shows there is only one slot and can not install another stick.
When I use dsdt.aml and config.plist with your method, just found the About This Mac does not show up. Do you have this problem?
If I replace the config.plist with my previous one, About this Mac will show up, but the HD led start to flash again.