Search results

Can those with a 590 confirm that at least 1 HDMI output works ? as this is what I will need to connect to a TV. Below is the card I'm looking at getting Sapphire Radeon Nitro+ RX 590 11289-01-20G Bless

As already been discussed many times over, Apple will always charge a premium so doesn’t really makes sense trying to compare cause at the end of the day it’s about profit and not so much best value... I like the mini and it surely can’t be beat in it’s form factor/looks.They should have kept...

I know you're not sitting here obviously, but since you implied that I did NOT try a USB2 stick I though that you were actually here o_O I described in detail rather than being vague to try and give a virtual representation thinking that I would get the same.I know there is a Hub at HP26 as...

I did test all ports with both USB2/3 Sticks, So I applied the -uia_ignore_rmcf and redid it twice, same thing, nothing comes up on HP26 so maybe that is due to the particular header on the MB or just the way it is on this board?Since nothing comes up on HP26 and your suggestion is that...

I made it simple and removed the SSDT hot patches so that logic would have pointed you towards the only other place it could be that clover supports files being loaded from.Also the pre-boot log clearly shows where it's loading from. If you already believe that it's complete you'll just ignore...

Do so don't like so my friend :mrgreen:.See how it feels to get a half reply from you?In my previous post I simply asked based on the info I provided how does the SSDT-UAIC look, did you reply?No, did you need problem files of that, No, yet don't want to go Hunting, again with this hunting, it's...

If you look carefully you'll find it in OEM.Will make the change then.

Debug attached.I left HP25 as 255 as I'm not sure.

OK,Does the SSDT look correct?

@RehabMan Tried again so here goes USB LayOut Z77X-UD5H rev.1 MotherBoard Rear IO 4 USB3 Ports (Blue) 2 USB2 Ports (Red) Case 2 Front USB3 Ports connected to USB3 Header on MB 2 Front USB2 Pors connected to USB2 Header on MB Port Identification USB2 2 Front USB2 Ports >...

No need to 'Hunt' as I did explain myself before and gave debug files in that post.I'm going to start over since I don't want you 'Hunting' for anything ok cause god forbid you pop a vein. Can you provide a link or summary as I asked before where I can figure this out as changing my SMBIOS may...

HP15/16 are 2 USB2 ports that's connected the a MB Header in Front of Case (PR11).HP15 is an IOGEAR Bluetooth Dongle.HP16 is a Logitech USB Receiver for Keyboard Mouse.PR11 hub (HP11->HP18) was not here before I changed to 255 I believe. PR21 are the 2 Rear ports on the MB one of which has a...

Attached.Bless

I already changed the values to 255 but it still happens.

Here goes :wave: 1.I have IOGEAR Bluetooth 4.0 USB Micro Adapter, GBU521 which shows up in System Info/Bluetooth/USB which I can pair my iPhone with but I don't think it's functioning as it should.One second it's Discoverable/Connectable (Off/No) next minute its' ON/Yes once I toggle it on.Also...

Honestly I thought that the Rear would have been Normal ports (3) since it's USB3, same goes for USB2 (0) and only those that are connected the a MB header would be Internal 255.I'll have to re-read a few times to wrap my head around it... In any case do you have any suggestion as to what could...

Ok just when I thought I had a grasp on this so my system has to be 255 then.Bless

SSP8 are the 4USB3 Ports on the Rear.SSP7 is the 2 USB3 ports in the front which is connected to the MB Header.PR 21 is 2 USB2 Ports on the Rear and PR11 is 2 USB2 ports in the Front connected to the MB Header.I'll correct the Values for 21/11 which suppose to be 255 right? PS:I forgot to...

@RehabMan I think I got it.Can you please take a look.Only issue is that when a USB stick is inserted into one of the Front USB3 ports the Logitech MX mouse stops working.

Great!Thanks for clearing that up.Bless