Hackintosh Xiaomi Mi Air 13.3 Skylake-U 2016 for macOS Mojave & High Sierra
Hackintosh your XiaoMi Air 13.3 Skylake-U 2016. This is intented to create a fully functional hackintosh for the Xiaomi Mi Notebook Air 13.3'' i5-6200U (Skylake-U 2016).
This guide is for the **XiaoMi...
I have a
Xiaomi Mi Notebook Air 13”, Bios vers A05 - CPU i5 6200U, HD 520 / GeForce 940MX
and I have spend the last weeks trying to turn it to a fully functional hackintosh. There is a thread on another forum but it is pretty much dead. The original author is not writing any more on the...
I have a problem that I cannot fix and have not found a solution anywhere. This has happened to more than one hacks I have (Skylake and Sandy Bridge) on both 10.12 and 10.13 . I run both machines with CsrActiveConfig 0x67 (no SIP).
When I manually update some kexts in /L/E or /S/L/E and...
I have the following:
* HP EliteDesk 800 G2 TWR
* Intel® 8 Q170
* MOBO HP 8053 (U3E1)
* Intel Core i7 6700 @ 3.40GHz Skylake
I have installed Sierra 10.12.2 and it is working very well. However I am facing a problem. Whenever I shutdown the machine it restarts.
I have tried the...
I have an HP Desktop (HP EliteDesk 800 G1 TWR) which has a Q87 chipset and a I5-4690 Haswell processor. It has a 4600 Intel GPU on board, however I have disabled it and used an ASUS GeForce GT 630 4GB.
I have successfully installed and configured El Capitan 10.10.2 on it using clover...
I would like to request some help and guidance on how to troubleshoot the performance issue I am facing with my GPU on a hackintosh.
My card used to perform ok on 10.8 and 10.9. When I upgraded to 10.10 I had a big performance loss. I am not sure if this is normal or not.
I have installed osx on a HP Compaq Elite 8300 which has an:
- NVIDIA Quadro NVS 300 512 MB.
I use the stock apple driver, chameleon with 'GraphicsEnabler=Yes' and everything works fine but with a small problem.
Sometimes the image I see within a browser or within a...
I have an issue which I believe is related to chimera but cannot really figure it out.
I have installed Mavericks on
- i5 3.2 GHz
- NVIDIA NVS 300
- 4GB DDR3 1600
- 1x Seagate Barracuda 500GB 7200RPM 4K
I had to install chimera manually using the "dd...
I installed 10.9 on a
HP Compaq Elite 8300 PC CMT
- i5 3.2 GHz
- NVIDIA NVS 300
- 4GB DDR3 1600
- 1x Seagate Barracuda 500GB 7200RPM
I did not have any major problems (I will post a tutorial on a separate thread).
However I still have an issue: I can boot from the 500GB...
I have installed Mavericks and I am trying to optimize my build.
It runs on a ASUS P8P67 REV 3.0 with a patched 2303 BIOS.
I am trying to create my own DSDT but I cannot find any patch
in the PJALM's DSDT Asus Patches (the closest I find is
the ASUS P8P67 REV 3.1)
I have an Asus P8P67 B3 3.0 with a Core i5-2500K running 10.8.5 (NO overclock)
with modified BIOS 2303
In the multibeast I go for:
Miscellanious > FakeSMC*
ustomizations > Boot Options > Generate CPU States
Customizations > Boot Options > Use KernelCache
Customizations > System...
I have problems running multibeast.
I searched the forums but could not find any answer?
- Can I rerun multibeast any time to update the drivers etc?
- What exactly do the System Utilities in multibeast that I have to have it on always?
- Why should I run multibeast before rebooting and...
I have build a hackintosh based on P8P67 Asus and I am very excited since it is my first one :)
I have used a spare usb keyboard I had @ home.
However I would like to use the function keys for volume control, itunes control, ejecting the cd drive etc.
similar to the wireless apple...
I have a Asus P8P67 B3 with an i5 and installed 10.6.7 getting help from this wonderful
On installation I have connected
8 GB RAM - G.Skill RipJawsX 8GB (2x4GB) DDR3 1600MHz Dual Channel Kit F3-12800CL9D-8GBXL
boot SSD - 120GB OWC Mercury Extreme Pro SSD
GPU - XFX Radeon HD...
I finished my build based on a P8P67.
I am not sure how to check whether I booted on 64-bit or 32-bit?
Do I have to worry about it? Snow Leopard is suppose to run 64-bit
apps on 64bit no matter if you boot using 32 or 64.
Is there a post describing how to boot in either modes?
I have installed succesfully 10.6.7 using an asus p8p67 with an i5
4x4GB G.Skill RipJawsX 1600MHz Dual Channel and a XFX Radeon 6870!!!
I have used an OWC SSD for the primary disk and I am thinking of getting
another hard disk possibly 1 or 2 TB as DATA disk. Since the motherboard
I am about to order a Asus P8P67 but I see on the asus site that there are two revisions
of the motherboard a 3.0 and a 3.1. It mentions the following difference:
REV 3.0 – NEC USB 3.0 controllers
REV 3.1 – ASMedia USB 3.0 controllers
Should I have any problem with any of these?
Also I am...
I am reading in order to build my first hackintosh, taking the SB route.
I am still trying to understand the basics.
So from what I understand the if you get the right DSDT.aml file
for your bios/mobo then your OSX installation can "see" all your
But what if you do not have the...
I am shopping for a new hackintosh system (this will be my first) and I was reading the forum to decide on the components.
I will go for a GA mobo one of the GA-P67A-UD3/UD4/UD7-B3
with possibly a i5 2500k.
- Is there currently USB3 support?
- what Bluetooth adapter should I get in order...