Ok, finally got my workstation up and running after the move, decided to try and get the rx560 working from boot.
Upgrade to , still no joy then found this info on another thread
1. Disable CSM in the BIOS (needed to set OS option to Win 8 to be able to do this)
2. Disable Intel GPU...
Hi, ok edited post to make clear that with initial video card in bios set iGFX i can boot to RX 560 fine, but only get active screen at login screen.
Yes it is a real pain, but moving start of next month so just going to have leave as is till have more time.
Well that's a story, in my efforts to get it working i ended up with an install that would not load OSX, would get a black screen with white square in top left corner, even with known working efi folder in place!
Ended up nuking efi folder doing a repair install from recover boot after booting...
Hi, trying to install clover on sata drive connected via usb3 external driver bay, the drive already has efi partition.
Clover does not even see the usb drive as install destination?
Note multibeast fails when trying to install to this drive, though does at least see it an install destination...
Ok, so reverted back to using lilu and WhateverGreen kexts added your suggestion and disabled the patch from option 4 from OP.
Long story short, i could not boot to RX560, but could from from HD4000, though could not swap cables to use RX560, just got black screen, even when i tried enabling...
Ok removed injectati and deinit, left ig-platform id at 0x01660007
Removed lilu and WhateverGreen texts and tried:
Note i deleted dirs in:
Option 4 loads to black screen, same both with and without internal graphic enabled.
Note if i...
Hi, ok using option 2 from OP i can get it to boot ok until the apple logo and load bar should appear, but they don't?
Must be missing something in my settings!
Here is config.plist i tried.
Note did try deinit.
Would have thought that if it worked with older cpu/graphics it would work with later better supported one!
Seems not, tried Lilu and Whatevergreen kexts but boots with error in attached photo, tried adding deinit, but then just boots to black screen.
Should not that when making changes system...
Hi, did try RadeonDeInit = true, but no joy.
Will try again, and then give Lilu and Whatevergreen kexts a try.
Though bit flummoxed as to why it booted to RX560 without these when have i7-2600 installed?
Hi, update on my efforts.
I did a fresh install with no RX installed, all worked, but no acceleration and wrong Intel card reported, messed about for ages before realising that my system (built many years ago) did not have the i7-3770 cpu, but the i7-2600 ! doh
Made some edits to config.plist...
Ok, got my i7 3770k installed, made edits to config.plist
ig-platform-id = 0x01620007
Boots with Intel HD4000 fine, all working good.
With RX 560 booting with -v all goes well till i would expect the apple logo and load bar to appear then log on screen, but...
Hi, ok after much hassle i have a working booting install on my GA-Z77X-UP5-TH, with i7 3770 3.4 using onboard HD4000 graphics. (sig says RX560, will add that after get HD4000 working)
System boots nice and fast, but system reports graphics as being Intel HD 2000 8 mb?
I have correct bios...
Ok can't redo MultiBeast on my hackintosh drive from MBPro, install fails.
Have tried creating a fresh config.plist taking in some of the suggestions given, though have to keep Droptable MATS, if not just get a kernel panic on boot.
I also checked bios and found i had left 1st boot at IGFX and...
Hi and thanks for replies,
I could only get the initial install to boot when I added
which is why i kept them.
not sure what native NVRAM is?
Currently can't get into BIOS to check CSM is on due to reasons in OP