No, I'm located the Netherlands. Motherboards all should be the same I think. If not, it should have different code..
Anyway, just to be sure I updated to latest bios (F11).
Btw @mac 13, I didnt't understand you first sentence..
What applealc kext had been installed @the mac 13?
What do you see in sound output? Can you post a screenshot from your output in sound settings?
You said hdmi sound is working? Then you should have sound..
You have to set sound to "internal speakers"
It seems that DVI will not work at all.
HDAS to HDEF must be set (you can add it in Clover configurator).
I have not measured speed in my usb ports, but the are all functional. Have a look at my multibeast settings.
( note: this was with the former Unibeast version)
Best solution: display port (from the mb port)
That should work easily.
I have heard about people that used teamview to enter the computer externally and were able to continue...(OSx started up, even with bla k screen)
So, if you have hdmi or dvi, using teamview on other computer might be an...
this is my Clover map from my USB, so you can check the config.plist.
Notice also the dart= o and the nv_disable=1 options in the boot section, this might be important.
It was made with Unibeast and it worked.
I had a lot of problems during installation with the usb's too. In my situation I...
Solved, bought a DP cable and then it worked fine with multibeast.
(It also turned out later (see hackintool threads) that dvi will not function with this motherboard. Best to use is DP, second best hdmi)
Yes, and from the general framebuffer patching guide, use the spoiler for the H370M ds3h (oh, just noticed that casey already linked you there)..
Copy that part and put it in your config.plist (under devices if I remember well).
I am not shure about that. I experienced that the bios settings are very sensitive. One simple wrong setting can lead to these kind of errors..
Anyway, in the first screenshot, I have csm enabled. Then you will get some important uefi settings! If I have time coming days, I will take screenshot...
I had a lot of problems during installation with the usb's too. In my situation I didn't get the keyboard and mouse working. In the end, the only way I discovered was with a usb hub(2.0).
So, I connected the usb hub in the "usb 3.1 Gen port 1", see manual. It is located next to the usb type-c...
And in third screenshot, set dvmt total gfx to max and set wake on lan to disable.
Also you can get problems (no screen, but os starts up) with your display when using dvi or hdmi cable to monitor. DP cable will work for shure (when using igfx uhd 630).
It turned out that I had to copy Aptiomemoryfix.efi to a clover map. Had to do this by using clover shell commands.
Followed this guide : https://www.tonymacx86.com/threads/solved-clover-update-r4586-disables-os-boot-black-screen.256050/
Please inform people about this issue when giving...
Wow, interesting @pcp271828! We have complete different setup! (I had a look at your config.plist)
So, because I have used the unibeast/multibeast setup, it worked out completely different.
Probably experienced different problems also.
My problems were:
- hdmi went black during install at apple...