Search results

Loading Google Results...
  1. cccip

    Buying a Dedicated GPU for your Monterey, Ventura or Sonoma Hackintosh

    I'd rather suggest to clean the card heatsink and fans, replace GPU thermal grease but AVOID changing thermal pads. Video card manufactures trying to use non standard thickness pads (like 0,7mm or 0,9mm or 1,2mm) and you can barely find them available. Moreover, they tend to change their...
  2. cccip

    Gigabyte B550 Vision D (Thunderbolt 3) + AMD Ryzen 7 3700X + AMD RX 5600 XT

    I'll give it a try. However - few things to mention.... I had to recreate a new USB port map kext, seeing GPP0 issues gone from logs while PT21,22,23 is still there and causing system wake. BUT whole system became unstable. So, I simply rolled back the EFI and dissmissed the idea to have system...
  3. cccip

    Gigabyte B550 Vision D (Thunderbolt 3) + AMD Ryzen 7 3700X + AMD RX 5600 XT

    As I said earlier - if this is too much to spend a time on, don't bother. We'll happily live with no sleep on this board. Benefits of having extra front USB-C port and dual 2.5G LAN ports still matters more over standard "Vision D" board :)
  4. cccip

    Gigabyte B550 Vision D (Thunderbolt 3) + AMD Ryzen 7 3700X + AMD RX 5600 XT

    I had a downgrade few months back and got another issue where USB1.1 devices (keyboard/mouse) stopped working while USB2/3 devices had no issues. Others had ResBAR disabled ITE device you saw is internal RGB LED controller. PS. My XFX6800XT doesn’t have a USB port :)
  5. cccip

    Gigabyte B550 Vision D (Thunderbolt 3) + AMD Ryzen 7 3700X + AMD RX 5600 XT

    Hi Casey, pardon for a delay with answer. Got it done via USBToolbox on pure Windows (without OC loaded) and did a port mapping kext (attached). Tested all ports, except two motherboard internal headers F_USB1 and F_USB2. Most likely they are ports #3 and #7 in the list. PQI USB Flash Drive -...
  6. cccip

    Gigabyte B550 Vision D (Thunderbolt 3) + AMD Ryzen 7 3700X + AMD RX 5600 XT

    Hi Casey, Disabling all 3 does not make any difference, still complaining due to PT21 PT22 PT23
  7. cccip

    Gigabyte B550 Vision D (Thunderbolt 3) + AMD Ryzen 7 3700X + AMD RX 5600 XT

    No joy with them... 2023-06-28 00:49:58 +0500 Sleep Entering Sleep state due to 'Software Sleep pid=186':TCPKeepAlive=active Using AC (Charge:0%) 19 secs 2023-06-28 00:50:17 +0500 DarkWake DarkWake from Normal Sleep [CDN] : due to PT21 PT22 PT23/ Using AC...
  8. cccip

    Gigabyte B550 Vision D (Thunderbolt 3) + AMD Ryzen 7 3700X + AMD RX 5600 XT

    At last it makes some sense Casey, thanks. 1. Don't have a USB-C devices, except M1 MBP - plugged it to front USB-C and it is landing to XHC2/PTXH POT5 (i know it is weir to use M1 MacBook as USB3 flash disk, but better than nothing): 2. GREEN port USB3 disk lands at XHC/XHC0 PRT6 3. RED...
  9. cccip

    Gigabyte B550 Vision D (Thunderbolt 3) + AMD Ryzen 7 3700X + AMD RX 5600 XT

    Hi Casey, Used USB-C to lightning cable to connect "iPhone" (exact device name). Here is the port map & IOReg export: As for IntelBTPatcher.kext - "All of the features are already merged into IntelBluetoothFirmware project" which is been used in my setup.
  10. cccip

    Gigabyte B550 Vision D (Thunderbolt 3) + AMD Ryzen 7 3700X + AMD RX 5600 XT

    Thanks a lot folks. 1. Vision D-P differences (from Vision D) quite simple - one of blue USB3.2 ports from the back plate moved to mobo front to become internal USB-C front panel header and 2xIntel i211 1Gb controllers replaced with one 2.5Gb Intel i225 + one 2.5Gb Realtek RTL8125. Rest is...
  11. cccip

    Gigabyte B550 Vision D (Thunderbolt 3) + AMD Ryzen 7 3700X + AMD RX 5600 XT

    Hi Casey, - system still sleeps & wakes immediately with no Ethernet cable connected, or moved to 2nd LAN RTL8125 adapter - obviously there are no sleep/wake issues with dual-booted Windows or Linux - there are no USB devices attached to motherboard internal headers: - sanitised EFI attached...
  12. cccip

    Gigabyte B550 Vision D (Thunderbolt 3) + AMD Ryzen 7 3700X + AMD RX 5600 XT

    Made it slightly different way - enabled remote management and disconnected all USB devices from the system, then sent system to sleep using VNC. No change, wakes up same moment it goes to sleep. 2023-06-18 15:43:08 +0500 Sleep Entering Sleep state due to 'Software Sleep...
  13. cccip

    Gigabyte B550 Vision D (Thunderbolt 3) + AMD Ryzen 7 3700X + AMD RX 5600 XT

    Yes indeed, in a 1st place:
  14. cccip

    Gigabyte B550 Vision D (Thunderbolt 3) + AMD Ryzen 7 3700X + AMD RX 5600 XT

    Thanks folks for getting involved, here is the file. As far as I could understand - this got something to do with ACPI tables. In the meantime I'll swing the test with the elements above disabled. P.S. Same joy without Intel i225 and SMCProcessor: 2023-06-14 20:07:52 +0500 Sleep...
  15. cccip

    Gigabyte B550 Vision D (Thunderbolt 3) + AMD Ryzen 7 3700X + AMD RX 5600 XT

    2023-06-14 18:42:15 +0500 Sleep Entering Sleep state due to 'Idle Sleep':TCPKeepAlive=active Using AC (Charge:0%) 19 secs 2023-06-14 18:42:34 +0500 Wake Wake from Normal Sleep [CDNVA] : due to GPP0 PT21 PT22 PT23 USBW/User Using AC (Charge:0%) 81 secs...
  16. cccip

    Gigabyte B550 Vision D (Thunderbolt 3) + AMD Ryzen 7 3700X + AMD RX 5600 XT

    Hi @CaseySJ, Got the same mobo with latest available BIOS - sleep issues remain the same since day 1, but not so critical. Connected USB devices are Logitech G703 mice with receiver and Logitech K750 keyboard with unified receiver + Logitech C925e webcam. Using Intel AX210 module & Ventura 13.4...
  17. cccip

    TOTAL NEWBIE!!! will my amd rig work

    Same amount of time as with any Intel based system. The only nuance is AMD Kernel patches that do require updates from time to time in order to do MacOS updates. Intel AX201/210 adapters also supported with extra kexts (WiFi+BT), but things like Continuity/Airdrop not yet working. If those are...
  18. cccip

    macOS 13.2 Update

    Success using OC 0.8.8
  19. cccip

    macOS 13.0.1 Update

    Made upgrade from Monterey straight to 13.0.1 using OC 0.8.6 Notes: On AMD Zen3 new McOS Ventura needs a new kernel patches applied before starting installation (ones from Monterey not working); Intel i225 Ethernet adapter no longer supported by default and extra kext+aml solution must be used...
  20. cccip

    need help for install monterey

    Possible, but have to change GFX card to AMD
Back
Top