you confuse thunderbolt 3 and USB-C
there is NO thunderbolt port on the GPD.
The connector is USB-C, USB-C is a USB connector system, with several technologies that are not mandadory, vendors may support them... or not :
- USB3 Gen 1
- USB 3 Gen 2
- Display Port
- Thunderbolt 3
this mother board (Fatal1ty Z370 gaming) looks great but have some of limitations :
- 32GB RAM max :(
- 1 PCI slot only. That's not a problem, it can host the graphic card, but if i need another card later (10GbE, etc) it won't be possible
- 1 M2 slot only, which is not really a...
I plan to change my current hackintosh that was built in ... 2012
(i7 3770K, 16GB RAM / SSD SATA / GTX970)
and my needs are :
- i7 8700K
- 64Go RAM
- 1 or, better, 2 SSD nVME @3GB/s (512 GB each)
- GeForce 1080ti as i need CUDA
- very, very important : TB3, at least 1 port (if 2 is...
read the troubleshooting notes ...
and ooooohhhh "16. UniBeast will only write to an external drive with a partition of 32 GB or less. Larger drives will need to be partitioned."
I used a 64Gb usb drive !!!!
so i re-launched disk utility, partitionned my usb drive in 3...
I use the fans delivered in the case (only 1...) and with the CPU
It works great, but it's not so quiet... If you enjoy the silence (i'll see Depeche Mode this week-end), you might look for better fans.
I use 2 DD spaces, on for the DD and one for the SSD, the others spaces are empty. So...
I didn't try overclocking too
I have enought power in my hands :) and i used the fan delivered with the CPU, i don't think it's a good thing to play overcloking with that
Other point : i have some network issues. so overcloking is not my priority for the moment.
I have a GA-z77n-wifi, and i really need to be able to wake up lan (WOL) my computer via a logmein session
it doesn't work for me ... does it work for someone ? what is your config, what are your bios settings ... OS settings ?
I have Realtek Drivers installed, network works...
*[Success] Mini Mac Pro :) i7-3770k - GA-z77n-wifi - 256Go SSD + 500Go DD - 16Go Ram - GeForce 640
I don't know :( In fact, this computer was designed for professional purposes : After Effect, Première Pro, Cinema 4D.
For gaming purposes, it's not the best config. 128 Go SSD with a 2To DD...
I have the same problem :
> I7 3770K
> 16 Gb RAM Vengence
> GeForce 640
> Samsund 256Gb SSD
.... install ML 10.8.2 OK, install graphics OK, and then install FakeSMC & FakeSMC plugin >> non OK :( stuck at boot, and no possibilities to go one step backward... forced to...