Search results

I am experiencing the same behavior at installing High Sierra on my Aurora R4 with the following specs CPU - E5 2670 BIOS - A11 GPU - 980Ti

Hi there, Here are my key PC specs: Intel DX58SO (5600 BIOS) Default options with these changes Default SATA AHCI 3rd party SATA - disabled VT options - disabled UEFI - enabled Intel i7-930 @ stock Intel X-25 40gb SATA SSD (on port 1) nVidia GTX 980 Ti Here are the steps: Had to have an...

Here's my video of it in action

Here's my video of it in action

Just for fun, my GeekBench scores (lowend i know, lol) - https://browser.geekbench.com/v4/cpu/12870652

You may add the following to your /Extra/org.chameleon.Boot.plist <key>Graphics Mode</key> <string>1920x1080x32</string> <key>Quiet Boot</key> <string>Yes</string> The next time the HDD boots, it will be quicker and will seem to behave like the real deal :)

Hi there, Here are my key PC specs: Intel DX58SO (5600 BIOS) Default options with these changes Default SATA AHCI 3rd party SATA - disabled VT options - disabled UEFI - enabled Intel i7 930 @ stock Intel X-25 40gb SATA SSD (on port 1) nVidia GTX 980Ti Here are the steps: Had to have an...

Hi there, Here are my key PC specs: Intel DX58SO (5600 BIOS) Default options with these changes Default SATA AHCI 3rd party SATA - disabled VT options - disabled UEFI - enabled Intel i7 930 @ stock Intel X-25 40gb SATA SSD (on port 1) nVidia GTX 980Ti Here are the steps: Had to have an...

i tried doing this method on a freshly installed 10.10.5. I was able to boot onto a unibeast setup 10.10.5 installation and install yosemite from the USB onto my SSD I was able to boot onto the SSD by booting off the unibeast usb I installed multibeast importing the file from the thread that...

just bumping up this thread... i just got this motherboard and i wanted to install El Capitan on this. Are there any advise I need before pursuing installing this? or shall i be better use an older OS X for this motherboard?

In my case, I waited for 20 or so seconds of that noise screen and the display fixes by itself.

Btw, sound problems? Try this: http://www.tonymacx86.com/articles/143717-article-multibeast-7-0-update-8.html#post887583 Put in org.chameleon.Boot.plist <key>Kernel Flags</key> <string>kext-dev-mode=1</string>

I waited around 20 seconds and the display suddenly went back ok.

trying to go extreme and minimalist specs: GA-H87N-WIFI (10-15 watts ?) i3 4350 CPU (54 watts) Thermaltake Slim X3 (from motherboard watts ?) 1x Ballistix 8gb DDR3 1600 (3-5 watts ?) Samsung 120gb 840 Evo (3-5 watts ?) InWin BQ660 (80w) ...still waiting for my CPU to arrive :D...

Just to add. I am building one now based from these specs: http://www.tonymacx86.com/422-building-customac-buyer-s-guide-may-2014.html#mini Here are the changes with my rig: Case : InWin BQ660 (with 80w PSU) CPU : i3 4350 Haswell RAM : 1x 8gb Ballistix no HDD no WiFi Card...

After an update to 10.9.2, my Hackintosh unfortunately failed to boot. :(

Just an update again, I am able to update to the latest firmware as of this post: P9X79 PRO BIOS 4608. Posting this one on a Hackintosh on this motherboard on this version... No issues so far both Windows 8.1 x64 (UEFI boot) and Mavericks (Legacy).

A bit of an off-topic, but I tried installing the latest P9X79 Pro BIOS 4607 (released 01/03/14: https://www.asus.com/Motherboards/P9X79_PRO/#support) and restored the changes I made for my build on the BIOS (because it apparently reset everything to defaults) after BIOS update... So far, my...

May i ask what the cursor was? Was it the spinning ball or the arrow?

It kept stalling (and not responding even after it's forced shutdown) when i tried testing its folder opening speed by opening all folders at the same time under 'Library' folder. It was a non-issue on previous osx releases only until now. Restarting Finder didn't work. Only after deleting...