Search results

I've been using Synology for seven years now: a DS216se and a DS918+ without a single problem. Both over DSM7, plenty of features for my usage & very reliable!

Solved by enabling SIP (csr-active-config=00000000 in Opencore's config.plist) and clearing NVRAM at boot. Just in case someone else finds this problem. Thanks anyway!

Hi there! I'm on 11.6.1 and since then no updates pop up. Tried enabling auto updates in System Preferences to no avail. Also tried command line but the update doesn't appear. Strangely enough Safari 15.3 update appeared and installed correctly yesterday, but no way to update to 11.6.3...

Hi there! Thanks a lot for all your help! Finally I solved the problem and I would like to tell you how I did it. In complete desperation, I started having a look at UBSInjectAll's plist, and I found that some sysdefs have more info that others. Concretely, I found that iMac16,1 and iMac16,2...

Agree. Now I've switched to iMac17,1 as suggested. iMac15,1 was also a good choice but in the long run iMac17,1 will last till latest Intel-supported macOS is published. Yes, I already use a SSDT for power management. It's a must! After the change to iMac17,1 I had a look at IOReg to check...

Hi again! In response to your first question, I need the EHCI renames since the DSDT.aml extracted via Clover refers to the EHCI controllers as "EHC1" and "EHC2". Following your advice I've disabled my DSDT.aml and enabled the Renames, and attached is the .ioreg file as well as the EFI folder...

My DSDT includes EH renames and USB properties injection, as well as injection of properties for other devices. I extracted the original DSDT via Clover and then applied MaciASL patches that are still available online for older mobos. If you want the original to compare, just let me know...

Hi! 1) Attached you have my EFI folder. There are many kexts but in my config.plist only the necessary ones are enabled depending on what I'm testing. Regarding Library/Extensions, I don't have access to the computer right now but I remember it has very little kexts, all Apple-related. I'll...

Hi and Happy New Year! Any ideas on my issue? Thanks in advance!

Hi again! I tried with the new guide and this time I didn't remove the hubs, and now they appear in the USBPorts.kext generated by Hackintool. However, no HSxx ports appear under the EHxx hubs. Could it be a "connector type" issue? Looking at the Info.plist within USBPorts.kext, I'm not sure...

Hi there! I'm having some problems configuring my USB over an old H77-DS3H Gigabyte mobo. The problem is more related to the EH01 and EH02 controllers, since they only have "PR01" and "PR12" devices (no "HSxx" at all), so I just don't know how to map those ports. Their addresses appear on...

Hi there! Currently I'm using toleda's method to enable native GPU power management on my RX580 (build details in my signature, Coffee Lake build). I remember having to edit toleda's kext to add board-ID and other settings on its info.plist. I have downloaded your dAGPM.kext and I've found the...

I don't enable Trim. Should I nowadays? I thought it was only necessary when SSD's appeared some years ago. I heard about it, but I've never used it. Is there any report and/or evidence that it will help? Thanks!

Hi there! Quick question here: I'm using dual RX580 in my system (Coffee Lake build in my signature over Gigabyte Z370 Aorus Ultra 2). So... will both graphic cards benefit from the tricks mentioned in this thread? Or will I have to do something special for both to work at max performance? Of...

Hi there! As I said before, and given the requests I've received, I have updated the OP to include my EFI folder for OpenCore. Beware this setup is heavily customised and probably it won't boot your system (it contains DSDT patches, SSDT for USB and many other small configurations), but in...

Good to know! Congratulations!

OpenCore users: just update to 10.15.3 in my spare drive without any problem. If anyone is interested I'd be glad to upload my OpenCore's EFI folder. Beware my system is highly tuned (and thus the EFI folder) so it won't work for yours, but it could serve as a starting point. Cheers!

Yes! I started playing with OpenCore 0.5.3, later 0.5.4 and last week I updated to 0.5.5. Certainly the learning curve is steep, but if you understand how Clover works it is not so difficult. Right now OpenCore 0.5.5 is working pretty good, booting both Mojave 10.14.6 and Catalina 10.15.2, just...

I'm about to try the new OpenCore boot loader over my spare SSD drive for playing around with it... anyone tried this boot loader over a build similar to mine (Z370 chipset, i7-8700k CPU and RX580 8Gb)? Thanks in advance!

I was thinking the same... And what about your RAM sticks? Did you test them? They could also be the culprit... Again, my two cents!