Search results

It seems ports are detected on the XHC with or without USBInjectAll.kext. El Capitan is just not detecting the devices attached to @14300000, @14400000 and @14600000 (web cam, BT, Touchscreen respectively).

I was experimenting with MacBookPro versions, reverted back to MacBookPro11,1. Using the USBInjectAll installed, I see no difference. Internal bus i was referring to where USB devices like Camera/BT etc are connected. There are many SSDTs in your post, can you please guide me the correct one to...

I changed my HDD with a OCZ-TRION150 SSD. Have gotten pretty accustomed to re-installing El Capitan :). The issue I keep having is with USB Devices on internal Bus. For now I have dual boot with Mavericks where almost everything works flawlessly. Attached are ioregs from Mavericks and El...

For identifying CoreStorage volumes, i used the following command and no CoreStorage volumes were found. But then, now after successfully installing Clover to HDD, I wasn't expecting. diskutil cs list I will keep that in mind in case i have to repartition the drive in future.

Ok Thanks RehabMan. Looking into Core Storage issues now. Progress on upgrading to El Capitan from Mavericks: So installed clover on HDD while in Mavericks. Downloaded El Capitan and upgraded. A good result. Clover persists on HDD. El Capitan upgrade did create a recovery partition and I...

RehabMan, Clover fails to install. I wanted to revert back to Mavericks to take a breather so in El Capitan, I partitioned a USB (GPT) using Disk Utility and tried to install clover on it. Clover failed to install on the USB as well. So i just created Mavericks USB and played with install...

Been trying to install Clover to HDD without success. Not much info available on the net. Maybe something to do with the combination of drives i have. I can mount EFI folder but whenever I try to install clover to the HDD, it says it failed after going through all the motions. If I don't...

I had a working install of Mavericks on my laptop using UniBeast. This meant that I had DSDT and SSDTs modified already to enable my hardware. I wanted to try out El Capitan and most importantly, to have Clover UEFI. Step 1. Followed this Guide by RehabMan (Thanks a bunch RehabMan for the...

I believe you should be able to install OSX to your laptop. I installed Mavericks on Acer v5-573p (http://www.tonymacx86.com/mavericks-laptop-support/136654-acer-v5-573p-9899-mavericks-install.html). The wifi card may not work though. You may want to pick up an external usb wifi that is...

Wifi and BT cards did not work. Finally took the plunge and bought BCM94352 HMB from Amazon. Patched IO80211Family.kext and IOBluetoothFamily.kext as per toledo's procedure described here:[Guide] Airport - PCIe Half Mini v2. Can confirm Wifi working and its extremely fast compared to my...

Setting a color profile removed the distortion in menus except the apple logo stays distorted. Slide=0 kernel flag did not work. How can I get 10.9.1 or 10.9.2 graphics kexts. I only have 10.9.4 and also which kexts I need to replace?

Also, since the beginning, I noticed color distortion like this: Couldn't find much googling the issue. Hope someone has info on the cause or resolution for this.

That was the mistake I made. As soon as I named SSDT files correctly, the brightness worked like a charm. A bundle of thanks Rehabman for walking me through to working with DSDT and SSDT files. I feel a bit confident that I might be able to make the Audio work by editing DSDT. A bit of search...

Oh, looking at some other info it seems: Replace GFX0 in DSDT, SSDT3 SSDT4 (Where applicable) Backlight Patch apply to SSDT3 only (seems only place where no error generated during compile) I am trying the above. Will post or edit this post afterwards. ---- Edited --- Did not work. Backlight...

Thanks Rehabman. I get exactly the same errors as I get after retrieving the files through Linux and working with extracted files. Here is what I did: I added the repo to MaciASL I had two Parseop_store errors that I fixed with the 1.6 patch. Recompiled without errors I apply 2.12 (Rename...

Thanks Rehabman. I am stuck a little. I created ubuntu usb, found the /sys/firmware/acpi/tables and /sys/firmware/acpi/tables/dynamic but took a lot to get the required files. i could be wrong but this was only solution I found. sudo su cat pathoffiles/DSDT > pathtofiles/DSDT.dat I copied...

1. Simple attempts to get the audio working failed (Downloading prebuilt kexts for Realtek ALC282 or voodooHDA 2.8.4 from multibeast). Looking for any non DSDT fix). 2. Looking at Extensions, it seems IOBluetoothHIDDriver is not being loaded, thus causing BT to not see the BT Mouse. Not...

Trying to familiarize myself. I had no idea. Tested and that is correct, drag lock is released after a second. I will give it a shot. Thanks Rehabman. Good info.

I am trying to enable trim on my Samsung SSD and methods by Multibeast and Chameleon SSD optimizer did not work. What else I can try? Thanks in advance.

Thanks. Any ideas on how to resolve these two errors: Using MaciASL latest version Didn't realize pasting images in the browser doesn't work and i needed to upload first. Also, Trim Patches from Probook installer or Multibeast failed to enable trim. Chameleon SSD wizard failed to enable...