Search results

Loading Google Results...
  1. 6th

    FakePCIID: Broadcom BCM57XX network OOB

    I juist noticed something interesting, messages and iCloud is now working.
  2. 6th

    FakePCIID: Broadcom BCM57XX network OOB

    @the-darkvoid It's working for me, I manually injected the vanilla broadcom kext you posted (https://dl.dropboxusercontent.com/u/13972199/LAN/AppleBCM5701Ethernet_10.10.2.zip) and used kext wizard to inject FakePCIID.kext and FakePCIID_BCM577XX_as_BCM57765.kext via kext wizard and rebuilt and...
  3. 6th

    Bios settings problem- installation with no progress yosemite

    Did you set your drives to AHCI? EDIT: I'll be back, I have to run some errands. Obviously go and see if you can see your drives in UEFI and ensure they are set to AHCI instead of IDE. I'm guessing that is a fluke I'v never seen that before
  4. 6th

    Bios settings problem- installation with no progress yosemite

    Weird, go ahead and try installing with the -x flag when you reach chimera
  5. 6th

    Bios settings problem- installation with no progress yosemite

    Did you disconnect power to your 7870 prior to booting?
  6. 6th

    Recording Audio When Using Realtek ALC898 (Soundflower / Screenflow)

    This is not a post installation problem , although you need to create an aggregate device https://www.youtube.com/watch?v=U-5qxNeMl7E
  7. 6th

    Bios settings problem- installation with no progress yosemite

    Have you tried running off the CPU for video? Make sure you have onboard graphic enabled before doing so via UEFI and disconnect power going to your video card. Plug the HDMI going to your board, you should be able to see logon after that. Re-enable power for your card after your kexts are...
  8. 6th

    Unibeast + Mountain lion : Black screen problem

    Just use -x to boot to safe mode. That should at least get you to the login screen. From there you could install kexts from multibeast and reboot. You should not need to use the safe mode flag to boot after kext install on 2nd reboot
  9. 6th

    AsRock extreme3 gen3 + i5-2500k + gtx670

    Well short answer is to install ALC892 via Multibeast AUDIO/ ReaLTEK ALC8XX/ WITHOUT DSDT/ ALC892/ repair permissions , rebuild cache reboot. Without knowing your audio setup, I have no idea if you need HDMI audio or not.
  10. 6th

    Asrock z77 pro4

    Assuming your USB drive is formatted in FAT32. Move "Z77PRO41.60" to the root of your usb drive. Enter your bios choose instant flash and it should auto detect.
  11. 6th

    Asrock z77 pro4

    It's already pre-patched, you're going to need to patch your board if you want to use Mavericks. You won't be able to get past post without it. For Mountaion Lion, it wasn't entirely necessary but was needed for different reasons.
  12. 6th

    AMD/Nvidia Primary Display with AirPlay Mirroring

    AMD/Nvidia Primary Display with AirPlay Mirroring on Mavericks Just when i thought i didn't need Mavericks. Im going to give this a go on a seperate partition.
  13. 6th

    [GUIDE] How to definitely get the grey Apple Boot-Up BLACK! Stretched boot's no more! (Hex Editing)

    Nice, but this method only requires terminal http://www.tonymacx86.com/customization/87014-change-color-apple-boot-screen.html#post537668 Thanks to qb84
  14. 6th

    change color of apple boot screen?

    Thank you sir
  15. 6th

    [SUCCESS] Asrock Z68 Extreme4 GEN3 * 2600k * ATI 6850

    Sleep has been working for quite sometime (I'll have to update this guide in regards to what steps are needed to have sleep working properly) As for the Broadcom issue, the updated kext "supposedly" works via static IP. Unfortunately you're not able to pull an IP via DHCP from your router. This...
  16. 6th

    [SUCCESS] Asrock Z68 Extreme4 GEN3 * 2600k * ATI 6850

    I'm actually booting with the 64bit kernel now
  17. 6th

    [Z77 Build] SkeletalMac MKII - Z77X-UD5H w/Nvidia 560ti 448

    Nice build, but I think your power supply is physically inverted as far as I can tell from your pictures.
  18. 6th

    [SUCCESS] Asrock Z68 Extreme4 GEN3 * 2600k * ATI 6850

    Try booting with Graphics Enabler =no and see if you still lag. You won't get full resolution, but it's a step in determining what the real issue is. I assume you're on 10.7.3, correct?
  19. 6th

    [SUCCESS] Asrock Z68 Extreme4 GEN3 * 2600k * ATI 6850

    No you don't need to re select via Multibeast. I'm assuming everything is fine using your 8800? Hard to recreate an issue when I don't see the problem on my end. I'll look into it though. Can you verify which device you're using for audio when using the HD3000 via HDMI. Is it the Realtek ALC892...
  20. 6th

    [SUCCESS] Asrock Z68 Extreme4 GEN3 * 2600k * ATI 6850

    Select "macmini" as your SMBIOS under system definitions in Multibeast and enable "onboard graphics" via UEFI. Double check to see if the "Graphics Enabler" string is present in your org.chameleon.Boot.plist via textedit. Which should look like this (this is to ensure you get full resolution...
Top