Search results

Loading Google Results...
  1. IJskonijn

    IJskonijns Mac Pro 1.1 casemod - Ryzen 3600x + RTX2070S

    Sounds good! Let me know if you need more inspirational pics. I'm also interested in the AIO. Let us know how that works out!
  2. IJskonijn

    IJskonijns Mac Pro 1.1 casemod - Ryzen 3600x + RTX2070S

    I think you mean the 1.1 and 2.1? Possibly also the 3.1? I agree because in my case, I'm just using 3x 120mm fans. In the front and in the back. Ideal, because you can get fans that size everywhere.
  3. IJskonijn

    IJskonijns Mac Pro 1.1 casemod - Ryzen 3600x + RTX2070S

    @Laverda Sorry for my misleading information. The jack sensing in my build was based on these threads: https://www.tonymacx86.com/threads/home-brew-hd-front-panel-audio-without-the-hard-to-find-jacks.130264/...
  4. IJskonijn

    IJskonijns Mac Pro 1.1 casemod - Ryzen 3600x + RTX2070S

    Now that I see the pinouts again, I need to correct my other posts about the jack sensing. The resistors in the picture are for the power led
  5. IJskonijn

    IJskonijns Mac Pro 1.1 casemod - Ryzen 3600x + RTX2070S

    Thank you! The links to wiring are here: https://www.tonymacx86.com/threads/neilharts-mac-pro-hack.28892/post-185303 https://www.tonymacx86.com/threads/correction-to-aquamacs-macpro-front-panel-usb-wiring.59432/ https://www.tonymacx86.com/threads/wiring-the-power-button-mac-pro-2006.184381/...
  6. IJskonijn

    IJskonijns Mac Pro 1.1 casemod - Ryzen 3600x + RTX2070S

    We basically bypassed all of the mac sensing stuff and added our own with the resistors. So if you know the right pin and go to the last solder point before the jack, you can do the same
  7. IJskonijn

    IJskonijns Mac Pro 1.1 casemod - Ryzen 3600x + RTX2070S

    Here are some pics of the board. Looks like the resistors combined are around 300 ohms. The last part of the original jack sensing stuff was some smd resistor. That was roasted in two with the soldering iron, so that the bridge is the only path to the jack plug. In short: the resistors go...
  8. IJskonijn

    IJskonijns Mac Pro 1.1 casemod - Ryzen 3600x + RTX2070S

    We both are not exactly sure... But if memory serves it should be something like: Sense return goes through the jack plug and then via 2 resistors to ground. I think the 2 resistors together were 300 ohm. Also, we didn't use the original jack sensing stuff. That's why you see the resistors...
  9. IJskonijn

    IJskonijns Mac Pro 1.1 casemod - Ryzen 3600x + RTX2070S

    My friend is like a wizard with that stuff. If I remember correctly, we used 2 resistors and a shorter path for that. (Also in the picture) I will ask him how it works.
  10. IJskonijn

    IJskonijns Mac Pro 1.1 casemod - Ryzen 3600x + RTX2070S

    The clean look was what I was going for, so thanks!! Yeah I love the HDD, had to have it :mrgreen: I have a M.2 SSD as a boot drive, that's good enough for now. When I need an extra SSD for gaming, I'll probably add one in one of the drive bays.
  11. IJskonijn

    IJskonijns Mac Pro 1.1 casemod - Ryzen 3600x + RTX2070S

    No, not at first. For now it's more of a gaming PC ;)
  12. IJskonijn

    IJskonijns Mac Pro 1.1 casemod - Ryzen 3600x + RTX2070S

    After reading allmost all of the build threads here, I decided it was time to make my own and also share my adventure here. So here is my take on a Mac Pro casemod/build. Hope you guys like it! I know I do ;) TLDR; My goal was to create a stock looking Mac Pro build and grind as little as...
  13. IJskonijn

    Long time coming atx G5

    I would say metallic. Something close to the original colors
  14. IJskonijn

    2008 Mac Pro Case Completed Mod

    The mesh on the cpu cover is awesome! How did you make it and what kind of material is it?
  15. IJskonijn

    Announcement: AMD Based Systems and tonymacx86

    Thank you!!! Yes I know... But for the moment it's more a gaming setup, so maybe later I will change to something that supports macOS ;)
  16. IJskonijn

    Announcement: AMD Based Systems and tonymacx86

    Nice! Now maybe my profile info with AMD stuff won't be removed :mrgreen:
  17. IJskonijn

    Using existing sleds AND wiring

    Yes, just get standard screws that are the same thread and they just screw into the original places! On my build, I added some washers between the connector and the brackets for the perfect height.
  18. IJskonijn

    Mac Pro 5.1 mod

    Wow this one is really clean! Signed up to comment on this. Can you maybe share your IO print design?
Top