Search results

Loading Google Results...
  1. Linuxhack

    macOS High Sierra is Now Available on the Mac App Store

    Cannot tell too many interesting facts ... I had to remove one pair of memory modules and the graphics card to boot into the firmware screen, then did all the known corrections there (including setting memory to XMP profile), then had to figure out how to correct the old Sierra config.plist...
  2. Linuxhack

    [GUIDE] Remove extra Clover BIOS boot entries & prevent further problems

    Issue resolved with firmware update from Gigabyte above Version 20. No excessive boot entries anymore.
  3. Linuxhack

    macOS High Sierra is Now Available on the Mac App Store

    Some trouble after upgrading mainboard firmware of Z170X, as I couldn't boot at all anymore. After figuring out, everything else went "normal": USB and audio needed fixes. Not yet overclocked – but benchmarks are only about 5 % weaker than they were on my Sierra install with 4,4 GHz.
  4. Linuxhack

    Success Hackintosh i7 GA-Z170X-UD5 TH - i7-6700K - GIGABYTE GTX 970

    On my GA-Z170X-UD5 TH: On 10.11 everthing perfect. On 10.12 no audio yet, USB mixed bag, everything else I tried so far works. Figuring out dual custom OSX entry in Clover was challenging – so far I haven't finished with USB and audio (but audio didn't work on anything I tried.)
  5. Linuxhack

    Clover 740SC Issues

    Okay – solved! Insert "InjectEDID false" to Clover config.plist in Graphics section. <key>PatchVBios</key> <false/> <key>InjectEDID</key> <false/>
  6. Linuxhack

    Clover 740SC Issues

    Same issue here – I cannot get rid of the EDID injection ...
  7. Linuxhack

    [GUIDE] Remove extra Clover BIOS boot entries & prevent further problems

    You mean the UEFI Shell (started in the Clover menu)? If you are suspecting the GPU – pull it out and boot with IGPU. Are you booting the HD from USB? But even if you do so – the entry stays in NVRAM when you have booted with it plugged in once.
  8. Linuxhack

    [GUIDE] Remove extra Clover BIOS boot entries & prevent further problems

    Are you following the instruction exactly? You NEED the HD entry of EFI partition in NVRAM (see bcfg). You NEED the HD entry of OS X partiton (and any other partition you want to boot) in Clover plist (see my file post #38). You NEED, of course, to enable UEFI boot in in the firmware (many, even...
  9. Linuxhack

    [GUIDE] Remove extra Clover BIOS boot entries & prevent further problems

    Start with a USB stick with complete EFI folder (including BOOT folder). Copy that one to EFI Partition. Reboot with that in EFI Partition (without USB Stick). Reboot once again into Clover, go to shell. Write "bcfg boot dump". Remove everything except the entry with your EFI Partition, normally...
  10. Linuxhack

    [GUIDE] Remove extra Clover BIOS boot entries & prevent further problems

    Okay ... after lots of researching, thinking and trial-and-error (at least 50 reboots) I figured it out: 1. delete all PCI boot entries with bcfg (as described in the first post by Anachronaut) 2. write custom boot entry in Clover config.plist for all partitions you wanna boot 3. disable scan...
  11. Linuxhack

    [GUIDE] Remove extra Clover BIOS boot entries & prevent further problems

    I'm having this issue on all my Hackintoshes so far ... just deleting the BOOT folder in the EFI Partition did it all the time. Clover booted as normal, but I would't get excessive boot entries. But since upgrading to 10.11.3 I cannot manage it anymore – Clover just isn't recognized anymore if...
  12. Linuxhack

    10.11.0-10.11.3 Skylake Starter Guide

    Skylake Starter Guide Didn't install anything with Multibeast ... (Sorry!) ... I downloaded it from http://sourceforge.net/projects/hwsensors/ Yes, you can select specific plug-ins ... but try the complete package first – you can delete them later on. By the way, I found no difference in...
  13. Linuxhack

    10.11.0-10.11.3 Skylake Starter Guide

    Skylake Starter Guide I installed HWMonitor with all four plug-ins – it runs on 10.11.1, 10.11.2, and 10.11.3. The only issue is that it shows my CPU Fan as GPU Fan, and adds a 19 rpm fan where there is none. (I removed the whole GPU cooler and replaced it with a big passive one and a silent...
  14. Linuxhack

    OS X 10.11.3 Update

    Update without any issues – even GTX 960 works perfectly with NVidia beta driver.
  15. Linuxhack

    10.11.0-10.11.3 Skylake Starter Guide

    Skylake Starter Guide Tried new Version 2.5 of CodecCommander, changed plist to 15C50 (10.11.2). (Edit: The latter seems senseless.) Audio works now even after sleep. Now I updated to 10.11.3 without any issues – even NVidia beta driver works perfectly with GTX 960. Code 51 error remains ...
  16. Linuxhack

    10.11.0-10.11.3 Skylake Starter Guide

    Skylake Starter Guide After boot from Clover there's: – 99 (Super IO initialization) for about 3 seconds – b1 (Runtime AP installation ends) for about one second – 51 (Memory initialization error occurs) forever ... Here's my log file search for memory:
  17. Linuxhack

    10.11.0-10.11.3 Skylake Starter Guide

    Skylake Starter Guide (I meant slots, not banks.) OK ... figured out the mistake: In Clover plist I wrote 4 entries for the RAM slots, starting with "1" ending on "4". But as the first slot has to be "0" (and the last one "3") the OS just adds the "0" as empty, resulting in showing 5 slots...
  18. Linuxhack

    10.11.0-10.11.3 Skylake Starter Guide

    Skylake Starter Guide Hi, thanks for the codeccommander! It didn't work ... on the contrary: I could not boot anymore after installing it. After removal with the help of my CCC backup clone, I tried several other solutions. None of them are working – some not even before sleep. I left the...
  19. Linuxhack

    10.11.0-10.11.3 Skylake Starter Guide

    Skylake Starter Guide I have the kexts in EFI/Clover/kexts/Other. Moving the realtekALC.kext to S/L/E didn't make a difference – I just tried right now. Do you have another kext? I would appreciate if you'd load yours up! Here's my EFI/Clover folder:
  20. Linuxhack

    10.11.0-10.11.3 Skylake Starter Guide

    Skylake Starter Guide I have only two major issues with my install: 1. no audio after sleep (nothing i've tried has worked so far) 2. monitor goes to sleep after completion of boot (I have to put it off and on again). And two minor issues: 1. rare boot faliures (every 30 or so) – but it...
Top