Search results

Loading Google Results...
  1. starbot

    Still no-go with Unibeast 5.0.1

    I have older specs, but this worked for me (same issue otherwise as above). GraphicsEnabler=Yes PCIRootUID=1 nvda_drv=1
  2. starbot

    Dell U2713HM USB 3.0

    I have the same issue on my U2713HM's USB3 hub. I thought this might be caused by my board's NEC USB3 chipset (it was made before Intel included them) and the lack of power provided. USB2 devices work on the monitor's hub, but USB3 devices don't. Plugging USB3 devices directly into the...
  3. starbot

    ML boot on GA-H55M-S2V hangs at [PCI Configuration Begin]

    MacMan, It's not supported but it's the only way I can get my OSX to boot. Multibeast 4.6.1 and Multibeast 5.0.2 both cannot get my system to boot my GA-H55M-USB3 (UserDSDT and EasyBeast). Do you have a possible solution to this issue? It seems there's a group of GA-H55 boards that don't...
  4. starbot

    ML boot on GA-H55M-S2V hangs at [PCI Configuration Begin]

    After a fresh installation, I can get almost everything on my system working by simply booting from Unibeast and then selecting my OSX installation. I used the unix command to show hidden files so that I could view what was on the Unibeast USB. Off the top of my head, here are the basic steps...
  5. starbot

    ML boot on GA-H55M-S2V hangs at [PCI Configuration Begin]

    I have a GA-H55M-USB3 board, and I had the same issue with a clean install. I used Multibeast 5.0.2 and only checked the "UserDSDT or DSDT-Free Installation" option (DSDT.aml for my board placed on desktop). In verbose boot, the system halted at PCI Configuration. Like you, I used the...
  6. starbot

    Dual-Booting OSX ML and Win7 - Poor Performance in Windows

    Wow. This is embarrassing. Just posting this in case anyone else ran into the same issue. When I reconnected my drives after installing, some drive letters were re-mapped. As a result, some of my games installed on platter HDDs...kind of negating any of the SSD benefit. <insert smiley that's...
  7. starbot

    Dual-Booting OSX ML and Win7 - Poor Performance in Windows

    Unfortunately, I never got a chance to benchmarking the system. Yeah, I'm having issues with both Starcraft 2 and Diablo 3. When it was only Windows 7 on the SSD, Diablo 3 ran like butter. However, after doing a new install of Windows and dual-booting with ML, it's been incredibly jittery with...
  8. starbot

    Dual-Booting OSX ML and Win7 - Poor Performance in Windows

    Here's a bizarre question. I successfully created a dual-boot setup for OSX ML and Windows 7. Has anyone noticed slower performance on their Windows 7 partition? I used to run my SSD only with Windows 7 and gaming was very smooth. However, now that I dual boot and boot into Windows 7 with...
  9. starbot

    mac app store - device couldn't be verified (little help)

    In the org.chameleon.Boot.plist file, make sure this is included: <key>EthernetBuiltIn</key> <string>Yes</string>
  10. starbot

    GA-P55M-UD2 Install Thread

    Not sure if this will help, but have you fried the various boot flags? I'm running into other issues myself with a similar Gigabyte board, but maybe this will get some ideas rolling. e.g. -x GraphicsEnabler=No npci=0x2000 npci=0x3000 PCIRootUID=0 PCIRootUID=1 Also, are getting stuck...
  11. starbot

    Can't Boot into OSX, but ML 10.8 Installs Fine

    I've tried PCIRootUID=0 and 1, but neither of those gives me much success. I have full resolution and acceleration, so I'm just trying to figure out why I'm getting a kernel panic after I only check the UserDSDT box and System Utilities in Multibeast. Has anyone had luck by manually...
  12. starbot

    Difference between Unibeast boot and Multibeast boot?

    I'm having issues booting without Unibeast too, but you may have some luck. Have you tried using the boot flags PCIRootUID=0 or 1?
  13. starbot

    Can't Boot into OSX, but ML 10.8 Installs Fine

    Does anyone know if there's anything in the UserDSDT or Easybeast that might be causing the KP or causing the system to lose the video signal?
  14. starbot

    Can't Boot into OSX, but ML 10.8 Installs Fine

    Everything is set up properly in my BIOS (I also verified that AHCI was set too). What's strange is that Unibeast runs everything just fine, and I'm not sure why I'm getting a Kernel Panic after only selecting the UserDSDT and System Utilities options in Multibeast.
  15. starbot

    Can't Boot into OSX, but ML 10.8 Installs Fine

    Strange issue. Mountain Lion 10.8 installs perfectly on my system (even displays at native resolution during installation). If I boot into ML with Unibeast, I get full resolution and basic acceleration (not sure about opencl/gl). My problem is now is when I use the UserDSDT option in...
  16. starbot

    Graphics Stuttering

    Not sure how this will work in SL due to the Fermi Freeze, but this works for Fermis in Lion. I had a similar issue with a sluggish OSX on my GTS 450. I had this issue fixed with scorcho's help in this thread: viewtopic.php?t=20367 Removing the last idle interval removes all of the stutters...
  17. starbot

    Simple NVIDIA 4xx Install Procedure

    I had a similar issue with a sluggish OSX on my GTS 450. I had this issue fixed with scorcho's help in this thread: viewtopic.php?t=20367 Removing the last idle interval removes all of the stutters and sluggishness in Lion for me.
  18. starbot

    Editing AGPM to prevent GTX4XX Freeze

    In case you're running a fermi card and seeing transitions/animations that are somewhat choppy, try Scorcho's AGPM edit. The edit Scorcho gave me works like a charm! All animations and transitions are butter smooth, and even games run better (the AGPM still seems to need some tweaking because...
  19. starbot

    OSX freeze after installing official nVidia Fermi drivers

    I have an EVGA GTS 450 SC card that is having them same kernel panics. A little pixel starts on the top left that extends towards the right and then my screen has the message that I need to shutdown the computer. I currently use MacPro3,1 and enabler=yes. I'm thinking of editing the...
  20. starbot

    Simple NVIDIA 4xx Install Procedure

    I'm running an EVGA GTS 450 SC 1GB that finally started working after I deleted nvenabler and just using enabler=yes. However, I'm noticing that everything in OSX seems sluggish (Windows is normal). I switched to MacPro3,1 since that normally has fixed performance issues with other cards, but...
Top