Search results

Loading Google Results...
  1. qbe

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    BM Decklink Mini Monitor 4k (internal PCIE card) here. Works Sometimes after a cold boot needs a restart (the BM software control panel doesnt show hw present in the case of not working)
  2. qbe

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    Anyone using intel BT with Magic Trackpad 2 can confirm all working in macos?
  3. qbe

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    Anyone have experience with disk NOT going to sleep when idle? Seems not working on my setup. Manually ejecting it turns it off, but otherwise its always spinning even when not in use (for hours). Note: this is not about computer sleep. It's about turning mechanical disk off when idle while...
  4. qbe

    Enabling igpu alongside RX580 for better Handbrake performance

    i wish there was some "magic" way, guess your looking for it too :) as i use it only for previews for coworkers, i have fcpx (compressor) 720p Prores LT preset which outputs a file which i run through HB with constant quality profile. Many times it takes the same amount of time as going...
  5. qbe

    Enabling igpu alongside RX580 for better Handbrake performance

    yes, but that all depends on handbrake settings ofc but interesting in results is that going x265 with gpu would be probably 3-4 times faster than cpu, which is a lot of time saved
  6. qbe

    Enabling igpu alongside RX580 for better Handbrake performance

    re tests as x264/x265 encoder/decoder is only part of a chip i always asumed its never gonna tax your gpu fully. Filters and effects are different than en/decoders. What is important is the time/fps. cpu is gonna be used as gpus arent as flexible as cpus so cpu still has to do some...
  7. qbe

    Enabling igpu alongside RX580 for better Handbrake performance

    if you do a lot of encoding, macos is not the right "tool", windows applications/options are superior x265 is a problem on current cpus, I agree you really want to use gpus. Not sure how good quality it is on igpu. My test are mainly x264... but i would imagine the concept would be the same...
  8. qbe

    Enabling igpu alongside RX580 for better Handbrake performance

    concerning perfomance, why not use 580x in handbrake? concerning quality igpu is dead last. cpu>amd>igpu
  9. qbe

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    I did couple tests too, iMac 19/iMac20/iMacPro1. (I didnt have the "new" igpu framebuffer, but as hw is the same, I dont think it will make much difference, maybe some compatibility somewhere? Will test with though). i was only interested in fcpx (cpu+gpu test)/handbrake (pure CPU) performance...
  10. qbe

    Final Cut X - GPU usage when rendering - 5700 XT

    from my findings it really depends on your workflow. If all you do is export from fcpx to h264 using quicksync (and you dont mind the not so good quality), imac smbios is way to go. you can have igpu enabled in bios, but boot 5700xt if you work in many formats, export prores etc, imacpro...
  11. qbe

    Final Cut X - GPU usage when rendering - 5700 XT

    with my previous build - vega56 and 8core x299, using iMacPro, BruceX was around 9-10sec (fcpx 10.4.7 / 10.5.3-4
  12. qbe

    [Guide] Sapphire Radeon RX 5700 XT Nitro+ with macOS Catalina

    try unigine heaven etc
  13. qbe

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    Will be interesting to see if mb solves it. There are mentions of users who have problem with 5700xt, even proper Mac users in egpus. I can only say for myself, I never had any problem with this board nor asus x299. The last thing comes to mind would be some different vga BIOS or something. But...
  14. qbe

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    - reset NVRAM - confirm you have whatevergreen kext loaded* - try booting with every port, not just changing while its running - does your install still work with 580x now? - confirm card works in BIOS/Windows for extended time (5-10mins) - confirm you are using Casey config for AMD cards with...
  15. qbe

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    sorry, didnt know you had vision G, just read designare in your profile and assumed you are in vision D thread you have vision D but on vision D, im using stock OC folder from Casey with imacpro/imac20,2 smbios (both work)
  16. qbe

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    This also shows some mb sensors, which are hidden when booting macsmbios. Mainly the VR_OUT usefull for OC
  17. qbe

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    i have this exact gpu and mb and i have zero problems using displayport to UHD benq, can even dual screen (24 eizo HD) DP/DP or DP/HDMI
  18. qbe

    Final Cut X - GPU usage when rendering - 5700 XT

    first check your fcpx preferences, you should have 5700xt selected as gpu if you dont need faster h264 and prefer quality h264, ignore quicksync. quicksyncs speed is great for temp quality exports. for best quality, export prores out of fcpx and use handbrake. for most simple, yet powerfull...
  19. qbe

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    BIG thanks to @CaseySJ for putting this EFI and perfect guide together. I mean it.
  20. qbe

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    Im on Vision D and very interested in findings as its FCPX machine i can boot with igfx as primary with no display connected to mb with igpu-config - fcpx doesnt start - will tinker more though as the macos system install is not new, just using new machine efi folder... amd-config with imac...
Top