I didn't have to update anything but press update and all went smooth.
As for the EFI, you don't want to use mine as I have made board/ram specific settings to the config file.
However, I did use the base latest OC EFI from this guide. Followed the guide in detail and everything works!
Does anyone know if shikgva is dead in 12.3.1? I tried using whatevergreen 1.5.7 and shikgva=80 boot arg for SMBios iMac20,1 (Asus Z490 i7-10700k RX560) as well as reset NVRAM with no change in results. FairPlay 1(audio only) and 4 fail.
I have the 11700k processor. But I have an Asus Gaming TUF z490 plus wifi board and don't plan on running Thunderbolt. So bare minimum to get it up and running (already have my USBMap.kext). Just need to run an SMBIOS MacPro7,1
What of your EFI is necessary for my CPU to work?
So, how did you get past the high CPU frequency/high temps with SMBIOS iMacPro1,1 ?
When running SMBIOS iMac20,x then my CPU is idling normally and temps drop about 5 degrees Celsius. but iMacPro1,1 the CPU is idling at Mac turbo frequency which is obviously not a good thing for the CPU. Any...
I need some help getting everything running properly and without manual overrides.
I have OC 079 installed on my machine:
Z170-HD3, i7 7700k, Radeon RX 560
I set everything up according to the KablyLake guide here
1. I enabled my onboard iGPU in bios and used:
OK. that means no need for...
Alright... Finally... got it all sorted out and working. My problem was related to my SMBIOS even though iMessage and FaceTime half** worked. Here's what I had to do to get everything working properly:
1. Logged out of iCloud, iMessage, and FaceTime. Remove the device from your iCloud account...
OK, so I went through everything as instructed:
1. defaults read com.apple.coremedia & defaults read com.apple.AppleGVA both gave me sillier error messages
2. Went through my entire config.plist and no traces of shikigva or unfairgva
3. Now the framebuffer...
a. I have i7 7700k which has a...
I'm glad I'm not the only one with the problem. I have my system configured as iMac 18,3 running a Radeon RX 560 2 GB. I did everything per OpenCore and install of 12.2.1 went smooth. People can see me but All that comes up is their icon for their video. What boot args should I add? I tried...