Search results

Loading Google Results...
  1. Say Heading

    The New Beginner's Guide to USB Port Configuration

    So finally I followed your advice. But at first I followed the Dortania guide and also mapped both ASMedia controllers (PXSX) simply because the USBMapSample.kext had templates in it. Works. But after that I deleted them from the final USBMap.kext and the result is the same. All ports there...
  2. Say Heading

    Custom SSDT's using Corpnewt's SSDTTime

    Interesting conversation, thanks for the insight. Do I understand you right assuming that using Hackintool´s info.plist would allow to change the power management for each port separately? What I interpret from the SSDT-EC-USBX file just seems to be one definition for all. Not that I - as...
  3. Say Heading

    The New Beginner's Guide to USB Port Configuration

    Yes, that´s why I want to have that map ready beforehand (and I need a break from fighting the USB installer´s setup...). Or should I interpret this as hidden hint to better stay below a total of 15 including the Asmedias?
  4. Say Heading

    The New Beginner's Guide to USB Port Configuration

    That sounds promising! You are right, two ASMedias, each with 4 additional ports PRT1-4 and HS01/02+SS01/02. So I do my mapping just on the XHC controller and should be fine (hopefully). Only checking the result might take some time as I´m still struggling with the change from an ancient...
  5. Say Heading

    The New Beginner's Guide to USB Port Configuration

    Excuse my unrelated chime in. I´m also in the process of mapping my ports with three different USB controllers on board (XHC, 2x PXSX) where some of the PXSX connected ports show up as PRT2/SS02 or PRT1/SS01. Just to make sure: The 15 port limit comprises all controllers together, not 15 ports...
  6. Say Heading

    Continuity and Handoff Capable Apple Mini Cards + PCIe and mini-PCIe Adapters

    Yes, but just on the surface. It works OOB in regards of wifi and bluetooth connections and allows airdrop. I did not get hands off/continuity but did not invest much time into a solution as I don´t need these functions (for now). I have not speed tested wifi but I "had the impression to have"...
  7. Say Heading

    Continuity and Handoff Capable Apple Mini Cards + PCIe and mini-PCIe Adapters

    In the meanwhile the vendor confirmed to also ship to DE. Maybe I was causing the trouble by following your .co.uk link from a canarian network access point. Now from DE it works, although more expensive than in the UK (EUR 63.99). https://www.amazon.de/dp/B081CFM2J4/?tag=tonymacx8603-21 Good...
  8. Say Heading

    Continuity and Handoff Capable Apple Mini Cards + PCIe and mini-PCIe Adapters

    Thanks for the info! So "working fine" does also mean continuity and handoff? That would be an interesting investment. Too sad, that they will not be sent to EU mainland. But why? We still have 6:30 hours till Brexit :cool:
  9. Say Heading

    Catalina 10.15.3 Update and Moving Kexts to .../Clover/kexts/other/ folder

    I was asking myself the same and just tried. It seems logical to do so anyway. So now all of my previously "installed by multibeast" kext moved, including the FakeSMCPlugins, to /EFI/clover/kexts/other. It works as expected. Strange, I cannot confirm this, but I am on other hardware. Are you...
  10. Say Heading

    Excessive Clover Boot Options?

    Well, I told clover to boot from my main drive as you mentioned it in the other post, but it does not. That is probably why the original posts question was asked. Clover should boot from there but uses the "filevault prebooter..." instead. Good to know. Thanks for that info. So maybe it is just...
  11. Say Heading

    Excessive Clover Boot Options?

    As I noticed the same unexpected behaviour for the first time after the successful installation of Catalina (namely booting from filevault prebooter from preboot) my question is why does clover now insist on booting from there when it did not on the previous system after it was installed...
  12. Say Heading

    Big Airline compatible ATX cases (24" x 16" x 10" -- 609mm x 406mm x 254mm)

    Did you check the regulations of the airlines that you are usually traveling with? According to IATA regulations the actual limit (recommendation) is 55cmx40cmx20cm with max 8kg, but many airlines differ - up or down, sometimes depending on ticket class.
  13. Say Heading

    pastrychef's Asus ROG Strix Z370-G Gaming (WI-FI AC) build w/ i9-9900K + AMD 6600 XT

    Yes, the version history does not mention interface changes in the bios tool. You should find it under Advanced/System Agent (SA) Configuration > Graphics Configuration > Primary Display > PEG. That is of course only for the non-WIFI version of the Hero X, but I assume both are more or less...
  14. Say Heading

    pastrychef's Asus ROG Strix Z370-G Gaming (WI-FI AC) build w/ i9-9900K + AMD 6600 XT

    @pastrychef It looks like BIOS 1901 is available and has the PEG option selectable again. ups, edit: For your board it´s the BIOS 2001, but I assume it will have it back also.
  15. Say Heading

    Stork's MyHero II Build: ASUS ROG MAXIMUS Z370 HERO X - i7-8700K - AMD RX 580 - Thunderbolt 3

    Very good, nice to have access to that option again. Many thanks!
  16. Say Heading

    Stork's MyHero II Build: ASUS ROG MAXIMUS Z370 HERO X - i7-8700K - AMD RX 580 - Thunderbolt 3

    Could you check if there is an option like System Agent (SA) Configuration > Graphics Configuration > Primary Display > PEG? Thanks!
  17. Say Heading

    Stork's MyHero II Build: ASUS ROG MAXIMUS Z370 HERO X - i7-8700K - AMD RX 580 - Thunderbolt 3

    Hi all max X Hero users, Has anyone noticed (and eventually already installed) the latest BIOS 1901? I'm just curious to know if they reenabled the options to enable iGPU MultiMonitor and PEG for POST (in reference to post #5170 of this thread). I'm just too busy (and scared...) to try myself...
  18. Say Heading

    Update from 10.14.3 10.14.5 Failed - Hung During Installation

    Okay, I´m not a hackintosh specialist, so I´m not in the position to help from the info seen in your screenshots, but maybe now others are able to chime in and take over. What comes to my mind is that the location of lilu and WEG is recommended to be in ∼Library/Extensions (properly installed...
  19. Say Heading

    Update from 10.14.3 10.14.5 Failed - Hung During Installation

    A screenshot of the verbose boot could help. Or is it the apple logo and loading bar after the verbose boot? Another thought: Do you have fakeSMC.kext (additionally) in EFI>CLOVER>kexts>Other? If not: Try. Clover, lilu, whatevergreen and other supplementary kexts you might have installed for...
  20. Say Heading

    Name the Next macOS (10.15)

    (deleted, irrelevant)
Top