Hi Rehabman. I followed your guide and created my own injector, in the format of both SSDT and KEXT.
In the trial, the KEXT can disable the port I do not want to use, which would, otherwise, trigger an error during startup.
However, the SSDT file cannot disable the port.
Personally, I am apt to...
The "USB error" problem solved by myself. Here are what I did.
Initially, I was looking up this thread. But I just found that there's a little difference. The guy, "AGuyWhoIsBored", his error is:
As you can see, my error indicated the specific port that triggered the problem...
Hi, my laptop takes quite a while when booting. I firstly doubt that it's a problem with a hard drive, so I redid into an SSD, but it is still there. I dug into the boot log (/var/log/system.log) and found that the machine gonna stuck at the very last:
As you can see, the three USB error...
I list a table to indicate my experiments.
version that AppleIntelFramebufferAzul.kext retrieved from
entered into osx
1.the version is 8.18.29 from 10.9.1. Because 10.9.4's kext does not work at all. I manually added MEI ID into info.plist. The reason I choose it from 10.9.1 but not others is becuase it works before on my M6I and 10.9.3's failed, too.
2.Here you are:
Thanks so much for your...
Hi, tony, toleda, and others.
I just dled your alc892's achieve. I found that the file "AppleHDAController" within "AppleHDA.kext\Contents\PlugIns\AppleHDAController.kext\Contents\MacOS" has problem. When I tried to open it with hexeditor, it shows a dialog to notice my the file has been...
That's what i am confused, too.
As what I have experienced before in M6I, a 8 series board, same results of tests with same CPU. The only way to boot OK with "IOReg/GFX0@2/ig-platform-id/<03 00 22 0d>" and fakeid=0x0 is to add ig-platform-id=<03 00 22 0d> into dsdt.aml. I used to...
You're right. I'm sorry about it.
Just now I have setting as you requested:
and reboot. Here are new IOReg achieve:
2.same fakeid=0x0 with graphics setting as:
and reboot. The machine couldn't boot into osx. It automatically reboot again and again. Consequently I even could not see the...
I have just tried several times. Here are the results.
1. Config.plist/Graphics/Ig-platform-ID = 0x0300220d
consequence after reboot: boot into osx OK but no QE/CI, same result as...
Hi again, toleda.
This time, i changed Config.plist/Graphics/ig-platform-id into 0x0d220003 in order to inverse the counterpart in IOReg displayed as 0x0300220d.
But, without IntelGFX fakeid, my screen went to black with no signal. Few seconds later, it reboot automatically.
Secondly, I use...
I know what you saw my incorrect setting.
However, I am acturally using 0x0300220d just as the screenshot of 2b in http://www.tonymacx86.com/graphics/134690-quick-fix-intel-hd-4600-graphics-acceleration-9-series-motherboards-4.html#post835781.
It is inversed in IOReg, isn't it?
Thanks for your remind;)
OK. I just deleted the old AppleIntelFramebufferAzul.kext in S/L/E. Then install the new kext retrieved from Post #1, which was fixed, by using Kext Utility. After restart, I extracted IOReg achieve. Here:
Thank you so much
Hi again, toleda.
This time, I brought a different disk. I clean the disk and clearly installed 10.9.4 OSX in it.
after install the "Azul-10.9.4-9series.zip" by using kext utility, here are my achieves you requested:
Thank you so much.