OK, i have used the kext of RehabMan/OS-X-BrcmPatchRAM as described in the page (load the kext in /System/Library/Extensions) and after the rebbot without kext cache my bluetooth device (USB dongle Broadcom 20702A3) show the updated firmware... so good! ....but no handoff and hot spot active in...
I have a GA-Z170X-UD5 TH with i7 6700K and Nvidia QUADRO M4200 4GB connected to DELL 32" 4K.
I tried to generate the SSDT for my i7 with ssdtPRGen.sh, but I have noticed that after the generation my CPU was always at max speed (from HWMonitor software).
Instead, if i delete the SSDT file, the...
I tried to generate the SSDt for my i7-6700k with ssdtPRGen.sh but i have noticed that after the generation my CPU was always at max speed (from HWMonitor software)
instead if i delete the SSDT file the CPU works great, also overclockd to 4.4 Ghz, and in HWMonitor the CPU speed my vary from...
In my configuration (see on the left <<< ) all working great with ElCapitan.
I have only two issues:
- If there are some USB disks connected, when the mac goes in stop mode, at awake the disks are disconnected and reconnected
- I can see several error diag file in the consolle, like this (any...
Other issue.... i don't understand why but the OS X goes in hibernated mode at random time...
this is my pmset:
AC Power -1*
Currently in use:
Sleep On Power Button 1
But with a i7-6700K Oc by default by the MB GA-Z170X-UD5 TH i need to change anything in the SSDT generated by ssdtPRGen?
Actually my i7 i set to 4.4 Ghz max, if i open the intel Power Gadget i can see that the 4.4 Ghz are working in OSX but in the system Info i can see 4.0Ghz... it's correct...
i have a hackintosh with the MB Gigabyte GA-Z170X-UD5 TH that use the Intel i219-V
I have notice that the transfer rate on my network is very slow from/to my hackintosh... With my iMac Mid 2011 the copy of file on the other machines are about 90-100 MB/s now on the mackintosh the copy is...
But you don't have the same motherboard? Anyone with this issue?
For now i have this memory/thunderbolt error 51 issue, and the error D3 after sleep (on OS X and WINDOWS)... anyone the same issues?
Everything else is good for now!
OK, the problem isn't the RAM but the Thunderbolt, I think...
But, if I start the Win10, I haven't the error. If I start the OS X, I have the error 51.... I have disabled the Thunderbolt in the BIOS... no error!
But, USB 3.1 is still in function?
ok i have installed all as first post and all is working... BUT i have the error 51 on the motherboard display, an error memory....
The OS X show both two 8gb dimm of Ballistic sport LT
where can be the problem?
Hi, I'm new and I would start with the same project... just two questions:
- USB 3.1 is working?
- RAID configuration is working? From bios setting?
- M32 disk port is working?
- Intel HD530 is working? I would start the project without the nvidia card and update it later...