Contribute
Register

Search results

Loading Google Results...
  1. blouse

    [SUCCESS] blouse's "Hack Pro" :: i9-9900K + Z390 Aorus Pro + Vega 64 + TB3 + USB3 :: 100% working

    Sure thing. Attached. Did you figure this out? It is a button that appears on the same screen where you are able to select "Change Install Location..." The issue I am having is pre-Clover during boot, it doesn't make it through BIOS because it thinks I want to run both cards at PCIe x8 as...
  2. blouse

    [SUCCESS] blouse's "Hack Pro" :: i9-9900K + Z390 Aorus Pro + Vega 64 + TB3 + USB3 :: 100% working

    @AndrezinhoCosta Anytime I've flashed my BIOS, the EFI option for my SSD has disappeared. Fixed via the link posted above. Sounds like you are having the same issue. Good luck, I hope you figure it out! @matthewnothing I have been wondering the same thing about HS12... Some guides seem to leave...
  3. blouse

    [SUCCESS] blouse's "Hack Pro" :: i9-9900K + Z390 Aorus Pro + Vega 64 + TB3 + USB3 :: 100% working

    @AndrezinhoCosta did you recently update the BIOS? Recently as I was trying a few different BIOS versions, this happened to me. The fix is outlined here (in the third post): https://www.tonymacx86.com/threads/solved-uefi-clover-boot-option-gone-after-bios-update.211715/ Perhaps this will be...
  4. blouse

    [SUCCESS] blouse's "Hack Pro" :: i9-9900K + Z390 Aorus Pro + Vega 64 + TB3 + USB3 :: 100% working

    I haven't been able to compare the two unfortunately, as I don't currently own an eGPU enclosure... yet at least :)
  5. blouse

    [SUCCESS] blouse's "Hack Pro" :: i9-9900K + Z390 Aorus Pro + Vega 64 + TB3 + USB3 :: 100% working

    Also if anyone knows how I can force my second internal GPU to 4x with this motherboard (run it 8x4x4 across the 3 PCI 16x slots), I'm dying to know :)
  6. blouse

    [SUCCESS] blouse's "Hack Pro" :: i9-9900K + Z390 Aorus Pro + Vega 64 + TB3 + USB3 :: 100% working

    Hi @franc01s, it was only to make room for the GC Titan Ridge add in card. Without this card, I would still be running two. I still have not found a way to run it in a configuration that allows for enough PCI lanes given the circuitry of the motherboard to run both cards + the GC Titan Ridge...
  7. blouse

    [SUCCESS] blouse's "Hack Pro" :: i9-9900K + Z390 Aorus Pro + Vega 64 + TB3 + USB3 :: 100% working

    @Shiitaki the motherboard outlined in this guide (Z390 Aorus Pro) PCIe specification is as follows: 1 x PCI Express x16 slot, running at x16 (PCIEX16) * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. 1 x PCI Express...
  8. blouse

    [SUCCESS] blouse's "Hack Pro" :: i9-9900K + Z390 Aorus Pro + Vega 64 + TB3 + USB3 :: 100% working

    Hey @steelfox It's only one supported when the GC Titan Ridge card is installed. Then there are not enough PCI lanes. Otherwise, with no GC card, you can run two internally. Not really that big of a deal though when you have the GC Titan Ridge card installed- you can easily run eGPU(s)
  9. blouse

    [SUCCESS] blouse's "Hack Pro" :: i9-9900K + Z390 Aorus Pro + Vega 64 + TB3 + USB3 :: 100% working

    Indeed, what @psedog said :) Also you might want to check out some of the builds that use the Aorus Z390 Designaire trim level motherboard- it has TB3 on board. Depending on how much TB3 connectivity is needed, it might be a better option for simplicity's sake. I am not 100% sure on this, but I...
  10. blouse

    [SUCCESS] blouse's "Hack Pro" :: i9-9900K + Z390 Aorus Pro + Vega 64 + TB3 + USB3 :: 100% working

    GC Titan Ridge TB3 PCIe card + headless iGPU working on 10.14.5.... + hot pluggable + only one warm boot into windows to activate the TB3 card (then hard boot into macOS is okay, card stays active) + sleep/wake, shutdown + hardware acceleration / headless iGPU - only single internal Vega64...
  11. blouse

    Solved > Gigabyte Z390 Aorus Pro Wifi + Gigabyte GC-Titan Ridge Help

    I have become very accustomed to the CMOS reset! So accustomed, in fact, that I got tired of shorting those two pins with a screwdriver (mainly because my dGPU is in the way). I soldered an old PCB button mounted to a 20mm square proto board to a 2 conductor JST pigtail that attaches right on...
  12. blouse

    Solved > Gigabyte Z390 Aorus Pro Wifi + Gigabyte GC-Titan Ridge Help

    Oh shoot, I just got it!!! I had upgraded to the latest BIOS which apparently has an issue with the Above 4G Decoding setting. I reverted back to F6, enabled Above 4G Decoding, installed OsxAptioFix2Drv-free2000 w/ EmuVariable, set my iGPU mem settings to minimum, and viola :) Thanks for the...
  13. blouse

    Solved > Gigabyte Z390 Aorus Pro Wifi + Gigabyte GC-Titan Ridge Help

    Well I tried everything, and I am still having the same issue when Titan Ridge card is installed + iGPU Enabled. I seem to remember there may have been different versions of OsxAptioFix2Drv-free2000.efi. Can anyone confirm whether or not that's true?
  14. blouse

    Solved > Gigabyte Z390 Aorus Pro Wifi + Gigabyte GC-Titan Ridge Help

    iMac19,1 Every time I enable 4G Decoding, my mobo actually thinks it wants to boot up with legacy BIOS... it's made me laugh a few times ;) I'll give the CSM Support a shot, though I think that's already on. Noted, will try this. Thanks! Same. I am having better overall system stability...
  15. blouse

    Solved > Gigabyte Z390 Aorus Pro Wifi + Gigabyte GC-Titan Ridge Help

    Hey @CaseySJ, also meant to say thanks for all of the super responsiveness :)
  16. blouse

    Solved > Gigabyte Z390 Aorus Pro Wifi + Gigabyte GC-Titan Ridge Help

    I can get it to boot into OS X with OsxAptioFix2Drv-free2000 & slide=0 with a fresh CMOS reset (and an unactivated Titan Ridge AIC). But then as soon as I activate in W10 and warm boot into OSX, I get a hang at "Start ReadKernelCache". I did get 0x3E980003 patched successfully but it made no...
  17. blouse

    Solved > Gigabyte Z390 Aorus Pro Wifi + Gigabyte GC-Titan Ridge Help

    Yeah pretty much right away. Apple logo is up for a split second. "Error allocating 0x11c46 pages at ###### type 2" I am using OsxAptioFix3Drv.efi In the process of repatching framebuffer with 0x3E980003 platform ID to see if that clears it up.
  18. blouse

    Solved > Gigabyte Z390 Aorus Pro Wifi + Gigabyte GC-Titan Ridge Help

    The symptom is I get an allocation error just after booting into macOS when I have iGPU=Enabled in BIOS as well as the GC TR card installed. Even setting TB=Disabled in BIOS gives the same result if iGPU=Enabled in BIOS. I tried connecting one of the Vega ports to the DP-In on the AIC, but no...
  19. blouse

    Solved > Gigabyte Z390 Aorus Pro Wifi + Gigabyte GC-Titan Ridge Help

    Yeah, I just tested it with two 10-minute each hard boots directly into macOS, pulling the power cable and everything. Boots up normally.
Top